I've installed redhat 5.2 in server config onto an intel p/100 with 32 meg RAM.
I hope to connect this to a Win98 client and a WinNT client using SAMBA. Once that is completed, then I will try to use Linux as an internet proxy server for the two clients.
the NIC is an Intel Ethernet Express
ifconfig eth0 yields
Link encap:Ethernet HWaddr 00:AA:00:47:26:A5
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:1 overruns:0 carrier:0
collisions:0
Interrupt:9 Base address:0x300
more /proc/ioports yields
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-009f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : npu
0168-016f : ide3
01f0-01f7 : id30
02e8-02ef : serial(auto)
0300-030f : eexpress
036e-036e : ide3
03c0-03df : vga+
03f0-03f5 : floppy
03f6-03f6 : ide0
03f7-03f7 : floppy DIR
03f8-03ff : serial(auto)
9000-9007 : IDE DMA
9008-900f : IDE DMA
more /proc/interrupts yields
0: 353182 timer
1: 687 keyboard
2: 0 cascade
4: 12 + serial
8: 1 + rtc
9: 0 eexpress
12: 0 + ide3
13: 1 math error
14: 4400 + ide0
Also, I think I've seen some errors like "SIOCADDRT invalid argument" during the boot process but I haven't found that log yet, assuming that there is one.
If more information is needed, I'll be happy to provide. Just tell me how to get it :-)
TIA,
Dick
Dick Kalin
Minneapolis, MN
