I start the gnome with command
startx >~/xlog 2>~/xerr
in xinitrc
i have : exec gnome-session
It start, but then it exit...
I attach the files that i get from stdout stream and stderr stream
....
And I have core dump but it is aboute 100k compresed, and i think that it is not good
idea to post it in list...
If you know that I must to do for normal work or you need additional information say
about it to me....
--------------------------------
Sent by Z-Mail - http://zmail.ru
XFree86 Version 3.3.3 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: November 18 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.36 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 0):
NV1, STG2000, RIVA128, RIVATNT, ET4000, ET4000W32, ET4000W32i,
ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100,
et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33,
gvga, ati, sis86c201, sis86c202, sis86c205, sis86c215, sis86c225,
sis5597, sis5598, sis6326, tvga8200lx, tvga8800cs, tvga8900b,
tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b,
tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi,
tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685,
cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, 3dimage975,
3dimage985, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428,
clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462,
clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541,
clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e,
cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200,
mgag100, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301,
ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7,
ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, s3_virge,
AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160,
NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,
ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
ct64300, mediagx, V1000, V2x00, p9100, spc8110, generic
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: disabled
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "ru"
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) SVGA: Graphics device ID: "ET6000"
(**) SVGA: Monitor ID: "CTX-1561"
(--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) SVGA: Invalid vertical timing for mode "400x300". Deleted.
Warning: The directory "/usr/share/fonts/Type1/" does not exist.
Entry deleted from font path.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/edict/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/cyrillic/"
(--) SVGA: PCI: Tseng Labs ET6000/6100 rev 48, Memory @ 0xe8000000, I/O @ 0x6800
(--) SVGA: ET6000: Using built-in programmable Clock Chip/RAMDAC (ID=0x84)
(--) SVGA: Ramdac: et6000
(--) SVGA: ET6000: MClk: 91.87 MHz, R/C: 0x15
(--) SVGA: chipset: ET6000
(**) SVGA: videoram: 4088k
(**) SVGA: Option "hw_cursor"
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
(--) SVGA: Maximum allowed dot-clock: 135.000 MHz
(**) SVGA: Mode "1024x768": mode clock = 75.000
(**) SVGA: Mode "800x600": mode clock = 50.000
(**) SVGA: Virtual resolution set to 1024x768
(--) SVGA: Generic SpeedUps selected (Flags=0x30)
(--) SVGA: ET6000: Using linear framebuffer at 0xE8000000.
(--) SVGA: ET4000: SpeedUps selected (Flags=0x30)
(--) SVGA: ET6000: Using hardware cursor
(--) SVGA: Using 3kb of unused display memory for extra acceleration functions.
(--) SVGA: XAA/Tseng: Using ET6000-specific Color-expansion (WriteBitmap,
FillRect(Opaque)Stippled).
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 pattern fill
(--) SVGA: XAA: Indirect CPU to screen color expansion (bitmap, stipple, imagetext,
polytext)
(--) SVGA: XAA: Using 8 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and non-transparent stipples
(--) SVGA: XAA: General lines and segments
Imlib Init
SetKbdSettings - type: 2 rate: 5 delay: 500 snumlk: 0
SetKbdSettings - Succeeded
xscreensaver-command: no screensaver is running on display :0.0
- disabling startup beeps
/dev/dsp: �������� �� �������������� ������ �����������
#translation: operaition not supported by this device
fatal error configuring sound, /dev/dsp
xscreensaver: couldn't get password of "fedor"
xscreensaver: locking is disabled (error getting password).
xscreensaver: does xscreensaver need to be setuid? consult the manual.
xscreensaver disabling server builtin screensaver.
xscreensaver: you can re-enable it with "xset s on".
ICE default IO error handler doing an exit(), pid = 1337, errno = 0
waiting for X server to shut down xterm: fatal IO error 32 (Broken pipe) or
KillClient on X server ":0.0"
Gdk-Message: Got event for unknown window: 0
initializing...
