Hi, Richard,
On Fri, 3 Sep 1999, Richard Adams wrote:
> On Thu, 02 Sep 1999, Richard Spencer wrote:
> > ***After drafting this message I got Bogdan's message: thanks, I will check
> > to be sure I've got the make utility. But I still think there's something
> > screwy. Read on.***
> >
> > I'm running a dual-boot windoze95 and RedHat 6.0 on a P133 notebook from Dell.
> >
> > I continue to run into setback after setback while attempting to upgrade
> > from kernel 2.2.5-15 to 2.2.12, and configure in support for my SCSI Zip,
> > Adaptec controller, and parallel port Syquest SparQ. Initially I ran the
> > menuconfig, which proved much easier for me.
>
>
> Once AGAIN support for your cards and protocols WAS and STILL is in
> 2.2.5.
>
> I have come to the conclustion that you dont really read and digest
> what we are telling you.
>
> Bogdan, John and myself have pointed this out time and time again.
>
> You have 2 chooses, 1) use 2.2.5-15 kernel with its contained
> properties you need, 2) get another _larger_ disk and install a
> "complete" install, that will save kilobytes bandwidth in mails and
> you will be able to make what ever you want whenever you want without
> having to ask us what to do beacuse your system cant find this or
> that.
Richard is right. Kernel 2.2.5 is more than enough. And if you're
getting a larger disk, you'll be able to install everything and save a lot
of time and nerves... Another chance would be to get another distribution
(May I recommend Slackware without starting a war????) and install it on
the same disk, because the space requirements are lower...
Have fun,
bogdan
>
> {BIG SNIP}
>
> --
> Regards Richard
> [EMAIL PROTECTED]
>
