Hmm do you have a serial port on the motherboard using com1 by any chance?
if you do, go into BIOS and disable it
> -----Original Message-----
> From: Stephen LeMay [SMTP:[EMAIL PROTECTED]]
> Sent: Monday, December 06, 1999 1:21 PM
> To: [EMAIL PROTECTED]
> Subject: more ppp hassle
>
>
> >Haveyou got the correct password in your script?
>
> Yes, I just changed it to post it here, I was using pap for
> the first log I posted, then I changed to chap, and this
> is the out put of the ppp log, still not able to make
> a useful connection....*sigh*
>
>
>
> Dec 5 22:59:06 slemay pppd[147]: Terminating on signal 2.
>
> Dec 5 22:59:06 slemay pppd[147]: Script /etc/ppp/ip-down started (pid
> 170)
>
> Dec 5 22:59:06 slemay pppd[147]: sent [LCP TermReq id=0x2 "User request"]
>
> Dec 5 22:59:06 slemay pppd[147]: Script /etc/ppp/ip-down finished (pid
> 170), status = 0x0
> Dec 5 22:59:06 slemay pppd[147]: rcvd [LCP TermAck id=0x2]
>
> Dec 5 22:59:06 slemay pppd[147]: Connection terminated.
>
> Dec 5 22:59:06 slemay pppd[147]: Connect time 2.0 minutes.
>
> Dec 5 22:59:06 slemay pppd[147]: Sent 586 bytes, received 865 bytes.
>
> Dec 5 22:59:07 slemay pppd[147]: Exit.
>
> Dec 5 23:04:59 slemay gpm[113]: No data
>
> Dec 5 23:06:24 slemay init: Switching to runlevel: 6
>
> Dec 5 23:08:25 slemay pppd[136]: pppd 2.3.10 started by root, uid 0
>
> Dec 5 23:08:42 slemay pppd[136]: Serial connection established.
>
> Dec 5 23:08:42 slemay pppd[136]: Using interface ppp0
>
> Dec 5 23:08:42 slemay pppd[136]: Connect: ppp0 <--> /dev/ttyS0
>
> Dec 5 23:08:44 slemay pppd[136]: Remote message: ^@
>
> Dec 5 23:08:44 slemay pppd[136]: local IP address 140.186.76.94
>
> Dec 5 23:08:44 slemay pppd[136]: remote IP address 140.186.76.130
>
> Dec 5 23:08:45 slemay pppd[136]: Received bad configure-nak/rej: 12 06
> 00
> 00 00 01
>
> Dec 5 23:09:43 slemay pppd[136]: Terminating on signal 2.
> Dec 5 23:09:43 slemay pppd[136]: Connection terminated.
>
> Dec 5 23:09:43 slemay pppd[136]: Connect time 1.1 minutes.
>
> Dec 5 23:09:43 slemay pppd[136]: Sent 436 bytes, received 840 bytes.
>
> Dec 5 23:09:44 slemay pppd[136]: Exit.
>
> Dec 5 23:12:29 slemay gpm[113]: No data
>
> Dec 5 23:14:07 slemay pppd[191]: pppd 2.3.10 started by slemay, uid 1001
>
> Dec 5 23:14:07 slemay pppd[191]: Using interface ppp0
>
> Dec 5 23:14:07 slemay pppd[191]: Connect: ppp0 <--> /dev/ttyS0
>
> Dec 5 23:14:08 slemay pppd[191]: local IP address 140.186.76.164
>
> Dec 5 23:14:08 slemay pppd[191]: remote IP address 140.186.76.130
>
> Dec 5 23:14:09 slemay pppd[191]: Received bad configure-nak/rej: 12 06
> 00
> 00 00 01
>
> Dec 5 23:16:20 slemay pppd[191]: Terminating on signal 15.
>
> Dec 5 23:16:20 slemay pppd[191]: Connection terminated.
>
> Dec 5 23:16:20 slemay pppd[191]: Connect time 2.3 minutes.
> Dec 5 23:16:20 slemay pppd[191]: Sent 1066 bytes, received 774 bytes.
>
> Dec 5 23:16:20 slemay pppd[191]: Exit.
>
> Dec 5 23:27:52 slemay init: Switching to runlevel: 6
>
