On Sat, 25 Dec 1999, Erik Jakobsen wrote about, RH 6.1 ?:
> Hi.
>
> First of all a Merry Christmas and a happy New Year 2000 to all of
> you.
>
> I have installed the RH 6.1 here, and have done a:
>
> make menuconfig
>
> >From this menu I have choosed:
>
> Amateur Radio Support
> Amatuer Radio AX.25 Level 2
> Amatuer Radio NET/ROM
> Serial port KISS driver for AX.25
>
> make dep
>
> make bzlilo
>
> rebooted
>
> added the new kernel to my lilo.conf.
If you done all the above "in the order" they are written in, then you wont
even be using the new kernel, it should be.
make config dep clean bzImage
make modules modules_install (if modules have been choosen)
cp arch/i386/boot/bzImage /boot/vmlinux-2.2.xx-1
(Where -2.2.xx-1 is the version number and the EXTRAVERSION number if
defined by you in the Makefile)
cp System.map /boot/System.map-2.2.xx-1
edit /etc/lilo.conf
THEN reboot.
> All this seemed to work fine, but there is no /ax25 anywhere, and I
> cannot execute the kissattach command.
There is no /ax25 directory, ax25 config files are located in /etc/ax25 but
only after you have installed the libax25 ax25-apps and ax25-utils which
can be found at;
ftp.hes.iki.fi/pub/ham/ax25/*
>
> Do I need to get further packages compiled into the kernel, or what
> is wrong ??.
Read the AX25-HOWTO which is found in the /usr/doc dirs.
For the kernel part read
/usr/src/linux/README
>
>
> med venlig hilsen - Erik Jakobsen - [EMAIL PROTECTED]
--
Regards Richard
[EMAIL PROTECTED]
http://people.zeelandnet.nl/pa3gcu/
Merry Xmas.
