Michael Daniels wrote:
> Hello,
>
> I recently upgraded my RH 5.2 to RH 6.1. Before the upgrade I had my
> machine configured correctly and was able to ping, telnet, basically
> communicate with the other machines on my Local LAN. After the upgrade I
> can no longer ping anything.
>
> I am using a 3Com 3C509B-TPO NIC. The eth0 device is (as far as I can tell)
> set up correctly and activates without any errors. I have stopped and
> restarted the network (/ect/rc.d/init.d/network stop and start) without any
> problems. Whenever I try to ping another machine I get the message
> 'Destination Host Unreachable'.
Make sure the correct module is set for the 3Com 3C509x card.
You may want to do an /sbin/lsmod to check what modules are installed.
The easiest way to change it is by going into the linuxconf > Basic Host
Information and look to see which modules is installed for eth0. If the wrong
one is selected highlight it and press Ctrl+X to view a list of available
options...
Hope this helps....
