You can do it easy with SuSe 6.3 just go into yast and there is a make
boot area.
Richard Adams wrote:
>
> On Fri, 21 Jan 2000, Erik Jakobsen wrote about, Bootdisk:
> > Hi.
> >
> > I have 2 computers running SuSE linux 6.3. BUT what i do not have is a
> > boot disk.
> >
> > How can it be made the most easy way :-))
>
> Many ways, one is edit /etc./lilo.conf and define the "bot =" parameter
> which would normaly be
> boot = /dev/hda
> On most systems to;
> boot = /dev/fd0
> place a floppy in drive A:
> run;
> /sbin/lilo
>
> > Next when this bootdisk has been made I have the idea to remove my 1.2GB
> > win98 harddisk that is placed as hda1. The next harddisk I have is the
> > one installed with linux 6.3, and I still want to use lilo on this one
> > when the first mentioned 1.2GB hdd has been removed.
> >
> > When removed I have the idea that I can boot from the bootdisk, and
> > after running lilo and then all will run ok.
> >
> > Good ideas are more than welcome.
> >
> > Thanks in advance.
> >
> > --
> > OZ4KK - Erik - [EMAIL PROTECTED]
> >
> > SuSE Linux 6.3
> --
> Regards Richard
> [EMAIL PROTECTED]
> http://people.zeelandnet.nl/pa3gcu/
