Please verify first some common mistakes:
- adress alocation for server and workstations, network adress, broadcast
adress
- workgroup name for server/ws
- try a "security=share" line in /etc/smb.conf
See my own /etc/smb.conf attached. I use DHCP for adresses.
Regaards,
Razvan
---
Razvan Sandu <[EMAIL PROTECTED]>
Network Administrator at I.R. COLOURS PROD S.R.L.
Tel. +40 (94) 629867 ICQ# 46380005 WWW: http://www.rsandu.go.ro
Powered by RedHat Linux release 6.1 (Cartman)
On Tue, 8 Feb 2000, Brian Dezarn wrote:
> I have 2 WIN98(1st ed) clients and Redhat 6.1 (kernel 2.2.12-20) server
> running Samba(SMB)2.0.5a-12. The WIN98 clients can see each other via
> SMB and can ping the linux server. The linux server can ping both WIN98
> clients and see itself via SMB. The problem is that I cannot get the
> WIN98 <-> Linux SMB connection working.
>
> I have read every howto, man page, web page, etc. I can find and still
> con't get this to work.
>
> All network pieces appear to be working. My WIN98 clients use the Linux
> server for DNS lookups, and internet routing sucessfully. Log files
> show nothing for smb or nmb.
>
> Here is my smb.conf
> [global]
> ; Uncomment this if you want a guest account
> ; guest account = nobody
> encrypt passwords = yes
> smb passwd file = /etc/smbpasswd
> log file = /var/log/samba-log.%m
> lock directory = /var/lock/samba
> share modes = yes
>
> [homes]
> comment = Home Directories
> browseable = no
> read only = no
> create mode = 0750
>
>
> Here is the output when I use smbclient to connect to the Linux box:
>
> [root@linux /etc]# smbclient -d 4 -NL linux
> Added interface ip=192.168.100.1 bcast=192.168.100.255
> nmask=255.255.255.0
> Client started (version 2.0.5a).
> resolve_name: Attempting lmhosts lookup for name linux<0x20>
> getlmhostsent: lmhost entry: 127.0.0.1 localhost
> getlmhostsent: lmhost entry: 192.168.100.2 office
> getlmhostsent: lmhost entry: 192.168.100.1 linux
> Connecting to 192.168.100.1 at port 139
> session request ok
> Domain=[WORKGROUP] OS=[Unix] Server=[Samba 2.0.5a]
> session setup ok
> tconx ok
>
> Sharename Type Comment
> --------- ---- -------
> tmp Disk Temporary file space
> IPC$ IPC IPC Service (Samba 2.0.5a)
>
> Server Comment
> --------- -------
> LINUX Samba 2.0.5a
>
> Workgroup Master
> --------- -------
> WORKGROUP LINUX
>
> Now the same connection to a WIN98 client:
>
> [root@linux /etc]# smbclient -d 4 -NL office
> Added interface ip=192.168.100.1 bcast=192.168.100.255
> nmask=255.255.255.0
> Client started (version 2.0.5a).
> resolve_name: Attempting lmhosts lookup for name office<0x20>
> getlmhostsent: lmhost entry: 127.0.0.1 localhost
> getlmhostsent: lmhost entry: 192.168.100.2 office
> Connecting to 192.168.100.2 at port 139
> session request to OFFICE failed
> resolve_name: Attempting lmhosts lookup for name office<0x20>
> getlmhostsent: lmhost entry: 127.0.0.1 localhost
> getlmhostsent: lmhost entry: 192.168.100.2 office
> Connecting to 192.168.100.2 at port 139
> session request to *SMBSERVER failed
>
> Here is the result of a telnet to the WIN98 client on port 139:
>
> [root@linux /etc]# telnet office 139
> Trying 192.168.100.2...
> Connected to office.
> Escape character is '^]'.
>
>
> Based on this information I can see no reason why the connection is
> being refused by the client. Can anyone HELP!!!!!!!!!!!!!!!!!!!!!!!
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
> the body of a message to [EMAIL PROTECTED]
> Please read the FAQ at http://www.linux-learn.org/faqs
>
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not many any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = COIFER
# server string is the equivalent of the NT Description field
server string = Calculatorul lui Razvan
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
printcap name = /etc/printcap
load printers = yes
# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
printing = bsd
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Security mode. Most people will want user level security. See
# security_level.txt for details.
security = user
# Use password server option only with security = server
; password server = <NT-Server-Name>
# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; password level = 8
; username level = 8
# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
; encrypt passwords = yes
; smb passwd file = /etc/smbpasswd
# The following are needed to allow password changing from Windows to
# update the Linux sytsem password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
; unix password sync = Yes
; passwd program = /usr/bin/passwd %u
; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n
*passwd:*all*authentication*tokens*updated*successfully*
# Unix users can map to different SMB User names
username map = /etc/smbusers
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /etc/smb.conf.%m
# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
; remote announce = 192.168.1.255 192.168.2.44
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
local master = yes
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
preferred master = yes
# Use only if you have an NT server on your network that has been
# configured at install time to be a primary domain controller.
; domain controller = <NT-Domain-Controller-SMBName>
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast
name resolve order = host lmhosts wins bcast
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no
unix password sync = no
netbios name = RAZVAN
encrypt passwords = no
map to guest = never
password level = 0
null passwords = no
dead time = 0
debug level = 0
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no
#============================ Share Definitions ==============================
[homes]
; comment = Home Directories
comment = Director personal
browseable = no
writable = yes
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /home/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /home/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# Set public = yes to allow user 'guest account' to print
guest ok = no
writable = no
printable = yes
public = yes
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = yes
; printable = no
; write list = @staff
# Other examples.
#
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %u option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
[cdrom]
comment = Unitatea CD-ROM a lui Razvan
path = /mnt/cdrom
public = yes
only guest = yes
writable = yes
printable = no
;[windows1]
; comment = Partitia Windows 1 a lui Razvan
; path = /mnt/dos1
; public = yes
; only guest = yes
; writable = yes
; printable = no
[windows2]
comment = Partitia Windows 2 a lui Razvan
path = /mnt/dos2
public = yes
only guest = yes
writable = yes
printable = no
