Hi again,
The problem didn't solve.
The following is my lilo.conf and the comment line is the test.
#FIX-TABLE
boot=/dev/hda
map=/boot/map
install=/boot/boot.b
#disk = /dev/hdc
# bios=0x1601 # error: 0x80 when boot
# bios=0x81 # system halt after boot,only show Loading sco
# sectors=63
# heads=16
# cylinders=2484
prompt
timeout=50
image=/boot/vmlinuz-2.2.5-15
label=linux
root=/dev/hda2
read-only
other=/dev/hda1
label=dos
table=/dev/hda
#other=/dev/hdc4
# table=/dev/hdc
# label=sco
#other = 3D /dev/hdc4 # open:3D no such file of directory or
#other =3D/dev/hdc4 # open:3D/dev/hdc4 no such file of directory
#table = 3D /dev/hdc
# label = sco
the sco must use normal mode and the cylinders are more than 1024.
i can't fdisk the harddisk under linux and mount the partition.
how can i rewrite the lilo.conf or mount it under linux?
Thanx,
jiangzhi
[EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.linux-learn.org/faqs
