After the recent success in installing 6.1 at work I decided to upgrade
my home pc to 6.1 too. All went well except that at home 6.1 recognises
the ethernet card and therefore ppp does not work via the modem. Here are
my outputs for running:
---------------
[root@legolas karthik]# /usr/sbin/pppd -defaultroute /dev/modem 38400
Using interface ppp0
Connect: ppp0 <--> /dev/modem
BSD-Compress (15/12) compression enabled
BSD-Compress (15/12) compression enabled
local IP address 129.170.40.78
remote IP address 129.170.40.12
---------------
[root@legolas karthik]# ping 129.170.17.4
connect: Network is unreachable
---------------
[root@legolas karthik]# /sbin/route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
129.170.40.12 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
---------------
What must I do to get this rectified?
Thanks,
-Karthik.
-------------------------------------
Whatever you want to do, you have to do something else first.
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.linux-learn.org/faqs
