I don't recognize this modem by it name. You might try to track it down in
the database at http://www.o2.net/~gromitkc/winmodem.html . Almost all
PCI-bus modems are Winmodems, hence will not work with Linux. If you have
one of the exceptions, you should be able to determine that at this site
and, perhaps, find the help you need there.
If this is a Linux-compatible modem ... you can use the program "setserial"
to change the IRQ (and IO base, if need be) of a /dev/ttyS* device, so it
will find the modem where it actually is. "man setserial" for the details,
or, if you verify that the modem works with Linux, post again and someone
here will probably be able to help.
COM2 is a Windows device, not an actual hardware location, though it
conventionally uses IRQ3.
At 10:28 PM 4/30/00 -0400, Ross M. Stuckey wrote:
>The modem is on Com 2 IRQ 11 and Linux can not find it.
>
>How can I change to IRQ 3 or get Linux to see my modem ?
------------------------------------"Never tell me the odds!"---
Ray Olszewski -- Han Solo
Palo Alto, CA [EMAIL PROTECTED]
----------------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.linux-learn.org/faqs
