On Thu, 01 Jan 1970, Sean Rima wrote about, Re: Strange Mouse Problem in SuSE 6.3:
>
> /dev/mouse is linked to /dev/ttyS1 but when I tried switching the ports,
>
> I killed GPM and ran it as gpm -t ms -m /dev/ttyS2 whch made it work.
>
> using -m /dev/ttyS1(3) doesn't :(
Why not just reset your bios to "standard"
/dev/ttyS0 = com1
/dev/ttyS1 = com2
I am quite sure you will save yourself a lot of hassel.
If for some reason you wish to keep it as is, please send the output of;
cat /proc/interrupts
cat /proc/ioports
The full line output of ls -al /dev/ttyS 0 1 2 3
output of ps ax | grep gpm
out put of setserial for all comports.
setserial /dev/ttyS0 1 2 3
Full output of dmesg concerning serial ports.
On another note if possable please configure you mailer or mailers editor
not do include so many empty lines.
Thanks.
--
Regards Richard
[EMAIL PROTECTED]
http://people.zeelandnet.nl/pa3gcu/
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.linux-learn.org/faqs
