No hardware changes whatsoever. Same version of Debian. Same modem
I specified S3, then S2. All the other settings are default and follow the
recommendations of pppconfig
But I have a tad of a memory that it was not set to S3 ... maybe S1. I
believe USRobotics has software installed under Windows that
self-configures. I have not used any of the jumpers that come with the board
So I will try S0 and S1 and report back
David
----- Original Message -----
From: Ray Olszewski <[EMAIL PROTECTED]>
To: davidturetsky <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>
Sent: Wednesday, August 02, 2000 2:55 PM
Subject: Re: Chat/ppp
> . . .
> I'll skip asking about winmodems and other questions I'd ask if the modem
> *never* worked under Linux. But you still need to check that you are
trying
> to use the correct serial port (i.e., the right /dev/ttyS* entry) and a
> speed that the modem can run at. So ...
>
> what serial port is the modem on? did pppconfig successfully
> find it there, or did you tell it the port identifier?
> what speed did you tell pppconfig to use for the port? Is it a
> speed that your modem understands?
> have you made *any* hardware changes since the time when you
> "first installed debian last year"? (I'm wondering
> about IRQ conflicts.)
> are you still running the same Debian install as you had then?
>
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.linux-learn.org/faqs
