On 2/20/21 1:18 AM, Dan Williams wrote: > On Tue, Dec 8, 2020 at 9:32 AM Joao Martins <[email protected]> wrote: >> >> The link above describes it quite nicely, but the idea is to reuse tail >> page vmemmap areas, particular the area which only describes tail pages. >> So a vmemmap page describes 64 struct pages, and the first page for a given >> ZONE_DEVICE vmemmap would contain the head page and 63 tail pages. The second >> vmemmap page would contain only tail pages, and that's what gets reused >> across >> the rest of the subsection/section. The bigger the page size, the bigger the >> savings (2M hpage -> save 6 vmemmap pages; 1G hpage -> save 4094 vmemmap >> pages). >> >> In terms of savings, per 1Tb of memory, the struct page cost would go down >> with compound pagemap: >> >> * with 2M pages we lose 4G instead of 16G (0.39% instead of 1.5% of total >> memory) >> * with 1G pages we lose 8MB instead of 16G (0.0007% instead of 1.5% of total >> memory) > > Nice! >
I failed to mention this in the cover letter but I should say that with this trick we will need to build the vmemmap page tables with basepages for 2M align, as opposed to hugepages in the vmemmap page tables (as you probably could tell from the patches). This means that we have to allocate a PMD page, and that costs 2GB per 1Tb (as opposed to 4M). This is fixable for 1G align by reusing PMD pages (albeit I haven't done that in this RFC series). The footprint reduction is still big, so to iterate the numbers above (and I will fix this in the v2 cover letter): * with 2M pages we lose 4G instead of 16G (0.39% instead of 1.5% of total memory) * with 1G pages we lose 8MB instead of 16G (0.0007% instead of 1.5% of total memory) For vmemmap page tables, we need to use base pages for 2M pages. So taking that into account, in this RFC series: * with 2M pages we lose 6G instead of 16G (0.586% instead of 1.5% of total memory) * with 1G pages we lose ~2GB instead of 16G (0.19% instead of 1.5% of total memory) For 1G align, we are able to reuse vmemmap PMDs that only point to tail pages, so ultimately we can get the page table overhead from 2GB to 12MB: * with 1G pages we lose 20MB instead of 16G (0.0019% instead of 1.5% of total memory) >> >> The RDMA patch (patch 8/9) is to demonstrate the improvement for an existing >> user. For unpin_user_pages() we have an additional test to demonstrate the >> improvement. The test performs MR reg/unreg continuously and measuring its >> rate for a given period. So essentially ib_mem_get and ib_mem_release being >> stress tested which at the end of day means: pin_user_pages_longterm() and >> unpin_user_pages() for a scatterlist: >> >> Before: >> 159 rounds in 5.027 sec: 31617.923 usec / round (device-dax) >> 466 rounds in 5.009 sec: 10748.456 usec / round (hugetlbfs) >> >> After: >> 305 rounds in 5.010 sec: 16426.047 usec / round (device-dax) >> 1073 rounds in 5.004 sec: 4663.622 usec / round (hugetlbfs) > > Why does hugetlbfs get faster for a ZONE_DEVICE change? Might answer > that question myself when I get to patch 8. > Because the unpinning improvements aren't ZONE_DEVICE specific. FWIW, I moved those two offending patches outside of this series: https://lore.kernel.org/linux-mm/[email protected]/ >> >> Patch 9: Improves {pin,get}_user_pages() and its longterm counterpart. It >> is very experimental, and I imported most of follow_hugetlb_page(), except >> that we do the same trick as gup-fast. In doing the patch I feel this >> batching >> should live in follow_page_mask() and having that being changed to return a >> set >> of pages/something-else when walking over PMD/PUDs for THP / devmap pages. >> This >> patch then brings the previous test of mr reg/unreg (above) on parity >> between device-dax and hugetlbfs. >> >> Some of the patches are a little fresh/WIP (specially patch 3 and 9) and we >> are >> still running tests. Hence the RFC, asking for comments and general direction >> of the work before continuing. > > Will go look at the code, but I don't see anything scary conceptually > here. The fact that pfn_to_page() does not need to change is among the > most compelling features of this approach. > Glad to hear that :D _______________________________________________ Linux-nvdimm mailing list -- [email protected] To unsubscribe send an email to [email protected]
