On 10/23/2015 07:48 PM, Felipe Balbi wrote:
>
> Hi,
>
> Tony Lindgren <t...@atomide.com> writes:
>> From: Tony Lindgren <t...@atomide.com>
>> Date: Fri, 23 Oct 2015 09:03:22 -0700
>> Subject: [PATCH] usb: musb: omap2430: Fix regression caused by driver core
>> change
>>
>> Commit ddef08dd00f5 ("Driver core: wakeup the parent device before trying
>> probe") started automatically ensuring the parent device is enabled when
>> the child gets probed.
>>
>> This however caused a regression for MUSB omap2430 interface as the
>> runtime PM for the parent device needs the child initialized to access
>> the MUSB hardware registers.
>>
>> Let's delay the enabling of PM runtime for the parent until the child
>> has been properly initialized as suggested in an earlier patch by
>> Grygorii Strashko <grygorii.stras...@ti.com>.
>>
>> In addition to delaying pm_runtime_enable, we now also need to make sure
>> the parent is enabled during omap2430_musb_init. We also want to propagate
>> an error from omap2430_runtime_resume if struct musb is not initialized.
>>
>> Note that we use pm_runtime_put_noidle here for both the child and parent
>> to prevent an extra runtime_suspend/resume cycle.
>>
>> Let's also add some comments to avoid confusion between the
>> two different devices.
>>
>> Fixes: ddef08dd00f5 ("Driver core: wakeup the parent device before
>> trying probe")
>> Suggested-by: Grygorii Strashko <grygorii.stras...@ti.com>
>> Signed-off-by: Tony Lindgren <t...@atomide.com>
>
> I'm fine with this patch to fix this v4.3 regression. Greg, do you want
> a pull request or can you take this in as a patch ? In any case:
>
> Acked-by: Felipe Balbi <ba...@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.stras...@ti.com>
It always fun when DD/PM core is updated to fix some driver/subsystem's
specific PM issue :(
>
>> --- a/drivers/usb/musb/omap2430.c
>> +++ b/drivers/usb/musb/omap2430.c
>> @@ -391,9 +391,20 @@ static int omap2430_musb_init(struct musb *musb)
>> }
>> musb->isr = omap2430_musb_interrupt;
>>
>> + /*
>> + * Enable runtime PM for musb parent (this driver). We can't
>> + * do it earlier as struct musb is not yet allocated and we
>> + * need to touch the musb registers for runtime PM.
>> + */
>> + pm_runtime_enable(glue->dev);
>> + status = pm_runtime_get_sync(glue->dev);
>> + if (status < 0)
>> + goto err1;
>> +
>> status = pm_runtime_get_sync(dev);
Hm. My assumption was that *Parent* device (omap2430) will be enabled
here :( But as I can see this will not happen:
static int rpm_resume(struct device *dev, int rpmflags)
{...
if (!parent && dev->parent) {
/*
* Increment the parent's usage counter and resume it if
* necessary. Not needed if dev is irq-safe; then the
* parent is permanently resumed.
*/
parent = dev->parent;
if (dev->power.irq_safe)
goto skip_parent;
^^^ and musb device is irq_safe :(
>> if (status < 0) {
>> dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status);
>> + pm_runtime_put_sync(glue->dev);
>> goto err1;
>> }
>>
>> @@ -426,6 +437,7 @@ static int omap2430_musb_init(struct musb *musb)
>> phy_power_on(musb->phy);
>>
>> pm_runtime_put_noidle(musb->controller);
>> + pm_runtime_put_noidle(glue->dev);
>> return 0;
>>
>> err1:
>> @@ -626,7 +638,11 @@ static int omap2430_probe(struct platform_device *pdev)
>> goto err2;
>> }
>>
>> - pm_runtime_enable(&pdev->dev);
>> + /*
>> + * Note that we cannot enable PM runtime yet for this
>> + * driver as we need struct musb initialized first.
>> + * See omap2430_musb_init above.
>> + */
>>
>> ret = platform_device_add(musb);
>> if (ret) {
>> @@ -675,11 +691,12 @@ static int omap2430_runtime_resume(struct device *dev)
>> struct omap2430_glue *glue = dev_get_drvdata(dev);
>> struct musb *musb = glue_to_musb(glue);
>>
>> - if (musb) {
>> - omap2430_low_level_init(musb);
>> - musb_writel(musb->mregs, OTG_INTERFSEL,
>> - musb->context.otg_interfsel);
>> - }
>> + if (!musb)
>> + return -EPROBE_DEFER;
>> +
>> + omap2430_low_level_init(musb);
>> + musb_writel(musb->mregs, OTG_INTERFSEL,
>> + musb->context.otg_interfsel);
>>
>> return 0;
>> }
>
--
regards,
-grygorii
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
