Hello.
On 10/23/2015 6:51 PM, Rolf Peukert wrote:
Add a function that sets up necessary data structures. In older kernels
this was done in a board_ file. To support initialization via a DT, this
now needs to be included in the probe() function.
Also declare a new device 'compatible' name (am35x-musb) to
differentiate it from omap3-musb.
Signed-off-by: Rolf Peukert <rolf.peuk...@imms.de>
---
drivers/usb/musb/am35x.c | 73
++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 73 insertions(+)
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index c41fe58..3c1477a 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -462,6 +462,59 @@ static const struct platform_device_info
am35x_dev_info = {
.dma_mask = DMA_BIT_MASK(32),
};
+static struct musb_hdrc_platform_data *am35x_get_config(
+ struct platform_device *pdev)
+{
[...]
+ /* Read settings from device tree */
+ np = pdev->dev.of_node;
+ if (np) {
+ of_property_read_u32(np, "mode", (u32 *)&pdata->mode);
+ of_property_read_u32(np, "interface-type",
+ (u32 *)&bdata->interface_type);
+ of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps);
+ of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits);
+ of_property_read_u32(np, "power", (u32 *)&pdata->power);
+
+ ret = of_property_read_u32(np, "multipoint", &val);
+ if (!ret && val)
+ config->multipoint = true;
These are common MUSB traits, so I think should be parsed by a generic
function. If at all -- they might be determined from the "compatible" prop.
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
