From: Mikko Ylinen <[EMAIL PROTECTED]>

Put madc driver into kbuild.

Signed-off-by: Mikko Ylinen <[EMAIL PROTECTED]>

Updated help text on Kconfig for TWL4030 MADC driver.

Signed-off-by: Felipe Balbi <[EMAIL PROTECTED]>
---
 drivers/i2c/chips/Kconfig  |   21 +++++++++++++++++++++
 drivers/i2c/chips/Makefile |    1 +
 2 files changed, 22 insertions(+), 0 deletions(-)

diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index bfab098..86869e2 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -128,6 +128,27 @@ config TWL4030_GPIO
        bool "TWL4030 GPIO Driver"
        depends on TWL4030_CORE
 
+config TWL4030_MADC
+       tristate "TWL4030 MADC Driver"
+       depends on TWL4030_CORE
+       help
+         The TWL4030 Monitoring ADC driver enables the host
+         processor to monitor analog signals using analog-to-digital
+         conversions on the input source. TWL4030 MADC provides the
+         following features:
+          - Single 10-bit ADC with successive approximation register (SAR) 
conversion;
+          - Analog multiplexer for 16 inputs;
+          - Seven (of the 16) inputs are freely available;
+          - Battery voltage monitoring;
+          - Concurrent conversion request management;
+          - Interrupt signal to Primary Interrupt Handler;
+          - Averaging feature;
+          - Selective enable/disable of the averaging feature.
+
+        Say 'y' here to statically link this module into the kernel or 'm'
+        to build it as a dinamically loadable module. The module will be
+        called twl4030-madc.ko
+
 config TWL4030_USB
        bool "TWL4030 USB Transceiver Driver"
        depends on TWL4030_CORE
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 255fbb1..6431675 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_TWL4030_CORE)    += twl4030-core.o
 obj-$(CONFIG_TWL4030_GPIO)     += twl4030-gpio.o
 obj-$(CONFIG_TWL4030_USB)      += twl4030-usb.o
 obj-$(CONFIG_TWL4030_POWEROFF) += twl4030-poweroff.o
+obj-$(CONFIG_TWL4030_MADC)     += twl4030-madc.o
 obj-$(CONFIG_RTC_X1205_I2C)    += x1205.o
 
 ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
-- 
1.5.5.rc3

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to