Get rid of some sparse warnings in twl4030 driver.
Signed-off-by: Felipe Balbi <[EMAIL PROTECTED]>
---
drivers/i2c/chips/twl4030-core.c | 2 +-
drivers/i2c/chips/twl4030-gpio.c | 53 ++++++++++++++++------------------
drivers/i2c/chips/twl4030-poweroff.c | 2 +-
3 files changed, 27 insertions(+), 30 deletions(-)
diff --git a/drivers/i2c/chips/twl4030-core.c b/drivers/i2c/chips/twl4030-core.c
index 953c247..eedbebd 100644
--- a/drivers/i2c/chips/twl4030-core.c
+++ b/drivers/i2c/chips/twl4030-core.c
@@ -638,7 +638,7 @@ static int twl4030_detach_client(struct i2c_client *client)
return 0;
}
-struct task_struct *start_twl4030_irq_thread(int irq)
+static struct task_struct *start_twl4030_irq_thread(int irq)
{
struct task_struct *thread;
diff --git a/drivers/i2c/chips/twl4030-gpio.c b/drivers/i2c/chips/twl4030-gpio.c
index 349cbda..c1f7107 100644
--- a/drivers/i2c/chips/twl4030-gpio.c
+++ b/drivers/i2c/chips/twl4030-gpio.c
@@ -190,9 +190,6 @@ static unsigned int gpio_pending_unmask;
/* pointer to gpio unmask thread struct */
static struct task_struct *gpio_unmask_thread;
-static inline int gpio_twl4030_read(u8 address);
-static inline int gpio_twl4030_write(u8 address, u8 data);
-
/*
* Helper functions to read and write the GPIO ISR and IMR registers as
* 32-bit integers. Functions return 0 on success, non-zero otherwise.
@@ -312,6 +309,31 @@ static struct irq_chip twl4030_gpio_module_irq_chip = {
};
/*
+ * To configure TWL4030 GPIO module registers
+ */
+static inline int gpio_twl4030_write(u8 address, u8 data)
+{
+ int ret = 0;
+
+ ret = twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, data, address);
+ return ret;
+}
+
+/*
+ * To read a TWL4030 GPIO module register
+ */
+static inline int gpio_twl4030_read(u8 address)
+{
+ u8 data;
+ int ret = 0;
+
+ ret = twl4030_i2c_read_u8(TWL4030_MODULE_GPIO, &data, address);
+ if (ret >= 0)
+ ret = data;
+ return ret;
+}
+
+/*
* twl4030 GPIO request function
*/
int twl4030_request_gpio(int gpio)
@@ -596,31 +618,6 @@ EXPORT_SYMBOL(twl4030_set_gpio_card_detect);
/* MODULE FUNCTIONS */
/*
- * To configure TWL4030 GPIO module registers
- */
-static inline int gpio_twl4030_write(u8 address, u8 data)
-{
- int ret = 0;
-
- ret = twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, data, address);
- return ret;
-}
-
-/*
- * To read a TWL4030 GPIO module register
- */
-static inline int gpio_twl4030_read(u8 address)
-{
- u8 data;
- int ret = 0;
-
- ret = twl4030_i2c_read_u8(TWL4030_MODULE_GPIO, &data, address);
- if (ret >= 0)
- ret = data;
- return ret;
-}
-
-/*
* gpio_unmask_thread() runs as a kernel thread. It is awakened by the unmask
* method for the GPIO interrupts. It unmasks all of the GPIO interrupts
* specified in the gpio_pending_unmask bitmask. We have to do the unmasking
diff --git a/drivers/i2c/chips/twl4030-poweroff.c
b/drivers/i2c/chips/twl4030-poweroff.c
index dbe413a..57c7fc7 100644
--- a/drivers/i2c/chips/twl4030-poweroff.c
+++ b/drivers/i2c/chips/twl4030-poweroff.c
@@ -28,7 +28,7 @@
#define PWR_P1_SW_EVENTS 0x10
#define PWR_DEVOFF (1<<0)
-void twl4030_poweroff(void)
+static void twl4030_poweroff(void)
{
u8 val;
int err;
--
1.5.5.23.g2a5fe
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
