* Jouni Hogander <[EMAIL PROTECTED]> [080430 00:09]:
> This patch adds common function to enable/disable omap2/3 uart
> clocks. Enabled uarts are passed by bootloader in atags and clocks for
> these enabled uarts are touched.

Pushing today.

Tony

> Signed-off-by: Jouni Hogander <[EMAIL PROTECTED]>
> ---
>  arch/arm/mach-omap2/serial.c       |   79 ++++++++++++++---------------------
>  include/asm-arm/arch-omap/common.h |    1 +
>  2 files changed, 33 insertions(+), 47 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
> index c9697a4..54ab7af 100644
> --- a/arch/arm/mach-omap2/serial.c
> +++ b/arch/arm/mach-omap2/serial.c
> @@ -3,7 +3,7 @@
>   *
>   * OMAP2 serial support.
>   *
> - * Copyright (C) 2005 Nokia Corporation
> + * Copyright (C) 2005-2008 Nokia Corporation
>   * Author: Paul Mundt <[EMAIL PROTECTED]>
>   *
>   * Based off of arch/arm/mach-omap/omap1/serial.c
> @@ -23,12 +23,8 @@
>  #include <asm/arch/common.h>
>  #include <asm/arch/board.h>
>  
> -static struct clk * uart1_ick = NULL;
> -static struct clk * uart1_fck = NULL;
> -static struct clk * uart2_ick = NULL;
> -static struct clk * uart2_fck = NULL;
> -static struct clk * uart3_ick = NULL;
> -static struct clk * uart3_fck = NULL;
> +static struct clk *uart_ick[OMAP_MAX_NR_PORTS];
> +static struct clk *uart_fck[OMAP_MAX_NR_PORTS];
>  
>  static struct plat_serial8250_port serial_platform_data[] = {
>       {
> @@ -87,10 +83,24 @@ static inline void __init omap_serial_reset(struct 
> plat_serial8250_port *p)
>       serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0));
>  }
>  
> +void omap_serial_enable_clocks(int enable)
> +{
> +     int i;
> +     for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
> +             if (uart_ick[i])
> +                     enable ? clk_enable(uart_ick[i]) :
> +                             clk_disable(uart_ick[i]);
> +             if (uart_fck[i])
> +                     enable ? clk_enable(uart_fck[i]) :
> +                             clk_disable(uart_fck[i]);
> +     }
> +}
> +
>  void __init omap_serial_init(void)
>  {
>       int i;
>       const struct omap_uart_config *info;
> +     char name[16];
>  
>       /*
>        * Make sure the serial ports are muxed on at this point.
> @@ -112,47 +122,22 @@ void __init omap_serial_init(void)
>                       continue;
>               }
>  
> -             switch (i) {
> -             case 0:
> -                     uart1_ick = clk_get(NULL, "uart1_ick");
> -                     if (IS_ERR(uart1_ick))
> -                             printk("Could not get uart1_ick\n");
> -                     else
> -                             clk_enable(uart1_ick);
> -
> -                     uart1_fck = clk_get(NULL, "uart1_fck");
> -                     if (IS_ERR(uart1_fck))
> -                             printk("Could not get uart1_fck\n");
> -                     else
> -                             clk_enable(uart1_fck);
> -                     break;
> -             case 1:
> -                     uart2_ick = clk_get(NULL, "uart2_ick");
> -                     if (IS_ERR(uart2_ick))
> -                             printk("Could not get uart2_ick\n");
> -                     else
> -                             clk_enable(uart2_ick);
> -
> -                     uart2_fck = clk_get(NULL, "uart2_fck");
> -                     if (IS_ERR(uart2_fck))
> -                             printk("Could not get uart2_fck\n");
> -                     else
> -                             clk_enable(uart2_fck);
> -                     break;
> -             case 2:
> -                     uart3_ick = clk_get(NULL, "uart3_ick");
> -                     if (IS_ERR(uart3_ick))
> -                             printk("Could not get uart3_ick\n");
> -                     else
> -                             clk_enable(uart3_ick);
> -
> -                     uart3_fck = clk_get(NULL, "uart3_fck");
> -                     if (IS_ERR(uart3_fck))
> -                             printk("Could not get uart3_fck\n");
> -                     else
> -                             clk_enable(uart3_fck);
> -                     break;
> +             sprintf(name, "uart%d_ick", i+1);
> +             uart_ick[i] = clk_get(NULL, name);
> +             if (IS_ERR(uart_ick[i])) {
> +                     printk(KERN_ERR "Could not get uart%d_ick\n", i+1);
> +                     uart_ick[i] = NULL;
> +             }
> +             else
> +                     clk_enable(uart_ick[i]);
> +             sprintf(name, "uart%d_fck", i+1);
> +             uart_fck[i] = clk_get(NULL, name);
> +             if (IS_ERR(uart_fck[i])) {
> +                     printk(KERN_ERR "Could not get uart%d_fck\n", i+1);
> +                     uart_ick[i] = NULL;
>               }
> +             else
> +                     clk_enable(uart_fck[i]);
>  
>               omap_serial_reset(p);
>       }
> diff --git a/include/asm-arm/arch-omap/common.h 
> b/include/asm-arm/arch-omap/common.h
> index 36a3b62..6c072de 100644
> --- a/include/asm-arm/arch-omap/common.h
> +++ b/include/asm-arm/arch-omap/common.h
> @@ -34,6 +34,7 @@ struct sys_timer;
>  extern void omap_map_common_io(void);
>  extern struct sys_timer omap_timer;
>  extern void omap_serial_init(void);
> +extern void omap_serial_enable_clocks(int enable);
>  #ifdef CONFIG_I2C_OMAP
>  extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
>                                struct i2c_board_info const *info,
> -- 
> 1.5.5
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to