Correct the interrupt mask in TUSB6010 and other nit-picking from my tree.
Signed-off-by: Andrzej Zaborowski <[EMAIL PROTECTED]>
---
drivers/usb/musb/musb_host.c | 2 +-
drivers/usb/musb/musb_procfs.c | 2 +-
drivers/usb/musb/tusb6010.c | 6 +++---
drivers/usb/musb/tusb6010_omap.c | 2 +-
4 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 64673b7..e9c766f 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1203,7 +1203,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
* we have a candidate... NAKing is *NOT* an error
*/
musb_ep_select(mbase, epnum);
- musb_writew(epio, MUSB_CSR0,
+ musb_writew(epio, MUSB_TXCSR,
MUSB_TXCSR_H_WZC_BITS
| MUSB_TXCSR_TXPKTRDY);
goto finish;
diff --git a/drivers/usb/musb/musb_procfs.c b/drivers/usb/musb/musb_procfs.c
index e6e050c..da683eb 100644
--- a/drivers/usb/musb/musb_procfs.c
+++ b/drivers/usb/musb/musb_procfs.c
@@ -453,7 +453,7 @@ dump_end_info(struct musb *musb, u8 epnum, char *aBuffer,
unsigned max)
/* Dump the current status and compile options.
* @param musb the device driver instance
- * @param buffer where to dump the status; it must be big enough hold the
+ * @param buffer where to dump the status; it must be big enough to hold the
* result otherwise "BAD THINGS HAPPENS(TM)".
*/
static int dump_header_stats(struct musb *musb, char *buffer)
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index bed2e18..1f3643b 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -740,7 +740,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem
*tbase)
break;
case OTG_STATE_A_WAIT_VFALL:
/* REVISIT this irq triggers during short
- * spikes causet by enumeration ...
+ * spikes caused by enumeration ...
*/
if (musb->vbuserr_retry) {
musb->vbuserr_retry--;
@@ -888,7 +888,7 @@ static irqreturn_t tusb_interrupt(int irq, void *__hci)
musb_writel(tbase, TUSB_DMA_INT_CLEAR, dma_src);
}
- /* EP interrupts. In OCP mode tusb6010 mirrors the MUSB * interrupts */
+ /* EP interrupts. In OCP mode tusb6010 mirrors the MUSB interrupts */
if (int_src & (TUSB_INT_SRC_USB_IP_TX | TUSB_INT_SRC_USB_IP_RX)) {
u32 musb_src = musb_readl(tbase, TUSB_USBIP_INT_SRC);
@@ -972,7 +972,7 @@ void musb_platform_disable(struct musb *musb)
/* disable all IRQs */
musb_writel(tbase, TUSB_INT_MASK, ~TUSB_INT_MASK_RESERVED_BITS);
- musb_writel(tbase, TUSB_USBIP_INT_MASK, 0);
+ musb_writel(tbase, TUSB_USBIP_INT_MASK, 0x7fffffff);
musb_writel(tbase, TUSB_DMA_INT_MASK, 0x7fffffff);
musb_writel(tbase, TUSB_GPIO_INT_MASK, 0x1ff);
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index 66e146e..f7a3ffe 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -188,7 +188,7 @@ static void tusb_omap_dma_cb(int lch, u16 ch_status, void
*data)
channel->status = MUSB_DMA_STATUS_FREE;
- /* Handle only RX callbacks here. TX callbacks musb be handled based
+ /* Handle only RX callbacks here. TX callbacks must be handled based
* on the TUSB DMA status interrupt.
* REVISIT: Use both TUSB DMA status interrupt and OMAP DMA callback
* interrupt for RX and TX.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
