This workaround is needed until powerdomain code resets wkdeps.
Signed-off-by: Jouni Hogander <[EMAIL PROTECTED]>
---
arch/arm/mach-omap2/pm34xx.c | 20 ++++++++++++++++++--
1 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index c30a218..a5504b7 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -369,6 +369,20 @@ static void __init prcm_setup_regs(void)
{
u32 v;
+ /* XXX Reset all wkdeps. This should be done when initializing
+ * powerdomains */
+ prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, MPU_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430_DSS_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430_NEON_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430_CAM_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430_PER_MOD, PM_WKDEP);
+ if (is_sil_rev_greater_than(OMAP3430_REV_ES1_0)) {
+ prm_write_mod_reg(0, OMAP3430ES2_SGX_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
+ } else
+ prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
+
/* XXX Enable interface clock autoidle for all modules. This
* should be done by clockfw */
cm_write_mod_reg(
@@ -573,6 +587,10 @@ int __init omap3_pm_init(void)
printk(KERN_ERR "Power Management for TI OMAP3.\n");
+ /* XXX prcm_setup_regs needs to be before enabling hw
+ * supervised mode for powerdomains */
+ prcm_setup_regs();
+
ret = request_irq(INT_34XX_PRCM_MPU_IRQ,
(irq_handler_t)prcm_interrupt_handler,
IRQF_DISABLED, "prcm", NULL);
@@ -599,8 +617,6 @@ int __init omap3_pm_init(void)
suspend_set_ops(&omap_pm_ops);
- prcm_setup_regs();
-
pm_idle = omap3_pm_idle;
/* XXX This is for gpio fclk hack. Will be removed as gpio driver
--
1.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
