While trying to make H4 USB work I had the following issues,
attached are patches to fix those:
- Fix the H4 board config for the wiring of the ISP1301
transceiver. The platform config had 4 wire configuration but
the driver has the 3 wire mode hard-coded. It's also possible
to set the ISP1301 to 4 wire mode, I wonder which one is more
ideal?
- In the OMAP OHCI driver use 24xx specific clocks when running
on 24xx. Rename variables for usb_dc/usb_lb and usb_hhc to the
more generic usb_ick and usb_fck. Platforms other than OMAP1
and 24xx are not supported by the driver at the moment.
- For OMAP OHCI SYSCON_2[UHOST_EN] needs to be set, otherwise we
get an external abort at OHCI init time.
- Make the OMAP USB root hub power budget a platform specific
option. Setting this to 0 will keep the current behaviour. There
are boards not providing enough power for host mode, but still
needing host mode functionality. This requires a special hub
providing VBUS both on the downstream and upstream facing ports.
For these .power_budget=-1 can be set meaning unlimited or
no power budget control. Maybe a warning about the need for such
a special hub would be nice?
- ISP1301 driver updated according to the new I2C framework.
- Update omap_h4_2420_defcofig to enable OTG, OHCI, Gadget
driver. Use the onboard USB OTG plug instead of the download plug.
With these and the specail self powered hub, I have a working OTG,
at least I can connect in both host and gadget modes and can ping
through usb0/eth1.
--Imre
>From 1fc1b0aa85414d153b7d290a483f09850c17bae3 Mon Sep 17 00:00:00 2001
From: Imre Deak <[EMAIL PROTECTED]>
Date: Thu, 15 May 2008 14:07:12 +0300
Subject: [PATCH] OMAP: USB: in the OHCI driver use proper clocks for 24xx
Instead of the OMAP1 specific usb_hhc, usb_dc/usb_lb use
usb_l4_ick and usb_fck for 24xx platforms. Other than OMAP1/
OMAP24xx platforms are not supported currently, so bail out
for those.
Signed-off-by: Imre Deak <[EMAIL PROTECTED]>
---
drivers/usb/host/ohci-omap.c | 57 ++++++++++++++++++++++++++---------------
1 files changed, 36 insertions(+), 21 deletions(-)
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index f14be49..335f414 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -65,21 +65,21 @@ static inline int tps65010_set_gpio_out_value(unsigned gpio, unsigned value)
extern int usb_disabled(void);
extern int ocpi_enable(void);
-static struct clk *usb_host_ck;
-static struct clk *usb_dc_ck;
+static struct clk *usb_ick;
+static struct clk *usb_fck;
static int host_enabled;
static int host_initialized;
static void omap_ohci_clock_power(int on)
{
if (on) {
- clk_enable(usb_dc_ck);
- clk_enable(usb_host_ck);
+ clk_enable(usb_ick);
+ clk_enable(usb_fck);
/* guesstimate for T5 == 1x 32K clock + APLL lock time */
udelay(100);
} else {
- clk_disable(usb_host_ck);
- clk_disable(usb_dc_ck);
+ clk_disable(usb_ick);
+ clk_disable(usb_fck);
}
}
@@ -298,6 +298,7 @@ static int usb_hcd_omap_probe (const struct hc_driver *driver,
int retval, irq;
struct usb_hcd *hcd = 0;
struct ohci_hcd *ohci;
+ const char *ick_name, *fck_name;
if (pdev->num_resources != 2) {
printk(KERN_ERR "hcd probe: invalid num_resources: %i\n",
@@ -311,20 +312,34 @@ static int usb_hcd_omap_probe (const struct hc_driver *driver,
return -ENODEV;
}
- usb_host_ck = clk_get(0, "usb_hhc_ck");
- if (IS_ERR(usb_host_ck))
- return PTR_ERR(usb_host_ck);
-
- if (!cpu_is_omap15xx())
- usb_dc_ck = clk_get(0, "usb_dc_ck");
- else
- usb_dc_ck = clk_get(0, "lb_ck");
+ if (cpu_class_is_omap1()) {
+ if (!cpu_is_omap15xx())
+ ick_name = "usb_dc_ck";
+ else
+ ick_name = "lb_ck";
+ fck_name = "usb_hhc_ck";
+ } else {
+ if (cpu_is_omap24xx()) {
+ ick_name = "usb_l4_ick";
+ fck_name = "usb_fck";
+ } else {
+ pr_err("hcd probe: unsopported architecture\n");
+ return -ENODEV;
+ }
+ }
- if (IS_ERR(usb_dc_ck)) {
- clk_put(usb_host_ck);
- return PTR_ERR(usb_dc_ck);
+ usb_ick = clk_get(0, ick_name);
+ if (IS_ERR(usb_ick)) {
+ pr_debug("hcd probe: can't get usb_ick %s", ick_name);
+ return PTR_ERR(usb_ick);
}
+ usb_fck = clk_get(0, fck_name);
+ if (IS_ERR(usb_fck)) {
+ pr_debug("hcd probe: can't get usb_fck %s", fck_name);
+ clk_put(usb_ick);
+ return PTR_ERR(usb_fck);
+ }
hcd = usb_create_hcd (driver, &pdev->dev, pdev->dev.bus_id);
if (!hcd) {
@@ -368,8 +383,8 @@ err2:
err1:
usb_put_hcd(hcd);
err0:
- clk_put(usb_dc_ck);
- clk_put(usb_host_ck);
+ clk_put(usb_ick);
+ clk_put(usb_fck);
return retval;
}
@@ -399,8 +414,8 @@ usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev)
omap_free_gpio(9);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
- clk_put(usb_dc_ck);
- clk_put(usb_host_ck);
+ clk_put(usb_ick);
+ clk_put(usb_fck);
}
/*-------------------------------------------------------------------------*/
--
1.5.5.1.148.g88e9e
>From 95ab9b7201db664d17b01b358d3084a2997d3cd9 Mon Sep 17 00:00:00 2001
From: Imre Deak <[EMAIL PROTECTED]>
Date: Thu, 15 May 2008 14:37:31 +0300
Subject: [PATCH] ISP1301: update isp1301_probe to the new i2c interface
Signed-off-by: Imre Deak <[EMAIL PROTECTED]>
---
drivers/i2c/chips/isp1301_omap.c | 14 +++++++++++---
1 files changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index 1525543..39e1bc4 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -1479,7 +1479,8 @@ isp1301_start_hnp(struct otg_transceiver *dev)
/*-------------------------------------------------------------------------*/
/* no error returns, they'd just make bus scanning stop */
-static int __init isp1301_probe(struct i2c_client *client)
+static int __init isp1301_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
int status;
struct isp1301 *isp;
@@ -1594,12 +1595,19 @@ fail2:
return 0;
}
+static const struct i2c_device_id isp1301_omap_id[] = {
+ { "isp1301_omap", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, isp1301_omap_id);
+
static struct i2c_driver isp1301_driver = {
.driver = {
.name = "isp1301_omap",
},
- .probe = isp1301_probe,
- .remove = __exit_p(isp1301_remove),
+ .probe = isp1301_probe,
+ .remove = __exit_p(isp1301_remove),
+ .id_table = isp1301_omap_id,
};
/*-------------------------------------------------------------------------*/
--
1.5.5.1.148.g88e9e
>From 3be8bca0a40afb6459c8d606aec609724f53ae81 Mon Sep 17 00:00:00 2001
From: Imre Deak <[EMAIL PROTECTED]>
Date: Wed, 21 May 2008 17:45:06 +0300
Subject: [PATCH] OMAP: H4: Change the ISP1301 wiring to 3 wire mode
This is hard-coded in the ISP1301 driver at the moment.
Signed-off-by: Imre Deak <[EMAIL PROTECTED]>
---
arch/arm/mach-omap2/board-h4.c | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 101b455..a8c51e1 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -419,7 +419,10 @@ static struct omap_usb_config h4_usb_config __initdata = {
* S2.POS3 = OFF, S2.POS4 = ON ... to allow battery charging
*/
.otg = 1,
- .pins[0] = 4,
+ /* NOTE: The ISP1301 supports both 3 and 4 wire signaling; at
+ * the moment the 3 wire mode is hardcoded in the ISP1301 driver.
+ */
+ .pins[0] = 3,
#ifdef CONFIG_USB_GADGET_OMAP
/* use OTG cable, or standard A-to-MiniB */
.hmc_mode = 0x14, /* 0:dev/otg 1:host 2:disable */
--
1.5.5.1.148.g88e9e
>From ad2b5417eba816d104395841f0be1db557cc0ad4 Mon Sep 17 00:00:00 2001
From: Imre Deak <[EMAIL PROTECTED]>
Date: Wed, 21 May 2008 16:44:44 +0300
Subject: [PATCH] OMAP: USB: make HOST/OTG mode power_budget a platform config option
Boards can have a specific power budget they provide, or they might
not be able to provide any for HOST mode operation in which case
they require a (special) hub providing power on their upstream
facing port. Make this configurable from the board-* files.
Signed-off-by: Imre Deak <[EMAIL PROTECTED]>
---
arch/arm/mach-omap1/board-nokia770.c | 1 +
arch/arm/mach-omap1/board-osk.c | 1 +
arch/arm/mach-omap2/board-h4.c | 8 ++++++++
drivers/usb/host/ohci-omap.c | 26 +++++++++++++++++---------
include/asm-arm/arch-omap/board.h | 10 ++++++++++
5 files changed, 37 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 08f533e..1150767 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -212,6 +212,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = {
.register_host = 1,
.register_dev = 1,
.hmc_mode = 16,
+ .power_budget = -1,
.pins[0] = 6,
};
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index a66505f..421c416 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -309,6 +309,7 @@ static struct omap_usb_config osk_usb_config __initdata = {
.hmc_mode = 16,
.rwc = 1,
#endif
+ .power_budget = 250,
.pins[0] = 2,
};
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index a8c51e1..e95fd31 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -441,6 +441,14 @@ static struct omap_usb_config h4_usb_config __initdata = {
/* .hmc_mode = 0x14,*/ /* 0:dev 1:host 2:disable */
.hmc_mode = 0x00, /* 0:dev|otg 1:disable 2:disable */
#endif
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+ .power_budget = -1, /*
+ * Unlimited, requiring an external hub
+ * providing VBUS on its upstream facing
+ * port.
+ */
+#endif
};
/* ----------------------------------------------------------------------- */
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 335f414..128b775 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -192,10 +192,24 @@ static int ohci_omap_init(struct usb_hcd *hcd)
dev_dbg(hcd->self.controller, "starting USB Controller\n");
- if (config->otg) {
+ if (config->otg)
ohci_to_hcd(ohci)->self.otg_port = config->otg;
- /* default/minimum OTG power budget: 8 mA */
- ohci_to_hcd(ohci)->power_budget = 8;
+
+ switch (config->power_budget) {
+ case 0:
+ if (config->otg)
+ /* default/minimum OTG power budget: 8 mA */
+ ohci_to_hcd(ohci)->power_budget = 8;
+ /* else leave it at the default */
+ break;
+ case (u16)-1:
+ /* Unlimited */
+ ohci_to_hcd(ohci)->power_budget = 0;
+ break;
+ default:
+ /* Board specific */
+ ohci_to_hcd(ohci)->power_budget = config->power_budget;
+ break;
}
/* boards can use OTG transceivers in non-OTG modes */
@@ -244,8 +258,6 @@ static int ohci_omap_init(struct usb_hcd *hcd)
/* TPS2045 switch for internal transceiver (port 1) */
if (machine_is_omap_osk()) {
- ohci_to_hcd(ohci)->power_budget = 250;
-
rh &= ~RH_A_NOCP;
/* gpio9 for overcurrent detction */
@@ -258,10 +270,6 @@ static int ohci_omap_init(struct usb_hcd *hcd)
}
ohci_writel(ohci, rh, &ohci->regs->roothub.a);
distrust_firmware = 0;
- } else if (machine_is_nokia770()) {
- /* We require a self-powered hub, which should have
- * plenty of power. */
- ohci_to_hcd(ohci)->power_budget = 0;
}
/* FIXME khubd hub requests should manage power switching */
diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h
index 0783e60..48dd9fa 100644
--- a/include/asm-arm/arch-omap/board.h
+++ b/include/asm-arm/arch-omap/board.h
@@ -87,6 +87,16 @@ struct omap_usb_config {
/* implicitly true if otg: host supports remote wakeup? */
u8 rwc;
+ /* Host/OTG mode power budget in mA:
+ * -1 == Unlimited. This can be the case when the board itself
+ * cannot provide VBUS so an external hub that provides
+ * VBUS on it's upstream facing port is required.
+ * 0 == Default; leave it up to USB core. For OTG mode this
+ * means a minimum of 8mA and unlimited for HOST mode.
+ * 1-500 == Board specific.
+ */
+ u16 power_budget;
+
/* signaling pins used to talk to transceiver on usbN:
* 0 == usbN unused
* 2 == usb0-only, using internal transceiver
--
1.5.5.1.148.g88e9e
>From e9cc1afff2779f4b5bac505ec848f77e350e3b96 Mon Sep 17 00:00:00 2001
From: Imre Deak <[EMAIL PROTECTED]>
Date: Wed, 21 May 2008 18:30:43 +0300
Subject: [PATCH] OMAP: USB: Enable USB host module when its configured in
SYSCON_2[UHOST_EN] needs to be set, otherwise OHCI is not accesible.
Signed-off-by: Imre Deak <[EMAIL PROTECTED]>
---
arch/arm/plat-omap/usb.c | 14 +++++++++-----
1 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index a619475..587b5dc 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -551,6 +551,7 @@ void __init
omap_otg_init(struct omap_usb_config *config)
{
u32 syscon = OTG_SYSCON_1_REG & 0xffff;
+ u32 syscon2;
int status;
int alt_pingroup = 0;
@@ -571,16 +572,16 @@ omap_otg_init(struct omap_usb_config *config)
pr_debug("OTG_SYSCON_1_REG = %08x\n", syscon);
OTG_SYSCON_1_REG = syscon;
- syscon = config->hmc_mode;
- syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */;
+ syscon2 = config->hmc_mode;
+ syscon2 |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */;
#ifdef CONFIG_USB_OTG
if (config->otg)
- syscon |= OTG_EN;
+ syscon2 |= OTG_EN;
#endif
if (cpu_class_is_omap1())
pr_debug("USB_TRANSCEIVER_CTRL_REG = %03x\n", USB_TRANSCEIVER_CTRL_REG);
- pr_debug("OTG_SYSCON_2_REG = %08x\n", syscon);
- OTG_SYSCON_2_REG = syscon;
+ pr_debug("OTG_SYSCON_2_REG = %08x\n", syscon2);
+ OTG_SYSCON_2_REG = syscon2;
printk("USB: hmc %d", config->hmc_mode);
if (!alt_pingroup)
@@ -619,6 +620,7 @@ omap_otg_init(struct omap_usb_config *config)
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
if (config->otg || config->register_host) {
syscon &= ~HST_IDLE_EN;
+ syscon2 |= UHOST_EN;
ohci_device.dev.platform_data = config;
if (cpu_is_omap730())
ohci_resources[1].start = INT_730_USB_HHC_1;
@@ -627,6 +629,8 @@ omap_otg_init(struct omap_usb_config *config)
pr_debug("can't register OHCI device, %d\n", status);
}
#endif
+ pr_debug("OTG_SYSCON_2_REG = %08x\n", syscon2);
+ OTG_SYSCON_2_REG = syscon2;
#ifdef CONFIG_USB_OTG
if (config->otg) {
--
1.5.5.1.148.g88e9e
>From 8ae289db9fd55d5af882d15a2ebcc07a2b17b01c Mon Sep 17 00:00:00 2001
From: Imre Deak <[EMAIL PROTECTED]>
Date: Thu, 22 May 2008 15:52:39 +0300
Subject: [PATCH] OMAP: H4: defconfig update
- select H4 OTG usb plug instead of download plug
- enable ISP1301
- enable OTG, OHCI, Gadget, Ethernet gadget (module)
- enable PM, needed by USB_SUSPEND
Signed-off-by: Imre Deak <[EMAIL PROTECTED]>
---
arch/arm/configs/omap_h4_2420_defconfig | 456 ++++++++++++++++++++++---------
1 files changed, 324 insertions(+), 132 deletions(-)
diff --git a/arch/arm/configs/omap_h4_2420_defconfig b/arch/arm/configs/omap_h4_2420_defconfig
index 5bc8918..09f46a9 100644
--- a/arch/arm/configs/omap_h4_2420_defconfig
+++ b/arch/arm/configs/omap_h4_2420_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:44:58 2007
+# Linux kernel version: 2.6.26-rc3-omap1
+# Thu May 22 15:32:25 2008
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -21,6 +21,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -40,12 +41,15 @@ CONFIG_SYSVIPC_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -53,6 +57,7 @@ CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -60,6 +65,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -72,10 +78,20 @@ CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
@@ -99,6 +115,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# System Type
@@ -127,6 +144,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
@@ -136,6 +154,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM7X00A is not set
#
# TI OMAP Implementations
@@ -149,6 +168,9 @@ CONFIG_ARCH_OMAP2=y
# OMAP Feature Selections
#
CONFIG_OMAP_DEBUG_DEVICES=y
+CONFIG_OMAP_DEBUG_SRAM_PATCH=y
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
# CONFIG_OMAP_RESET_CLOCKS is not set
CONFIG_OMAP_BOOT_TAG=y
# CONFIG_OMAP_BOOT_REASON is not set
@@ -157,7 +179,6 @@ CONFIG_OMAP_BOOT_TAG=y
CONFIG_OMAP_MUX=y
CONFIG_OMAP_MUX_DEBUG=y
CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
CONFIG_OMAP_MCBSP=y
# CONFIG_OMAP_MMU_FWK is not set
# CONFIG_OMAP_MBOX_FWK is not set
@@ -168,7 +189,6 @@ CONFIG_OMAP_LL_DEBUG_UART1=y
# CONFIG_OMAP_LL_DEBUG_UART2 is not set
# CONFIG_OMAP_LL_DEBUG_UART3 is not set
CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
# CONFIG_MACH_OMAP_GENERIC is not set
#
@@ -184,11 +204,10 @@ CONFIG_ARCH_OMAP2420=y
# CONFIG_MACH_NOKIA_N800 is not set
CONFIG_MACH_OMAP_H4=y
# CONFIG_MACH_OMAP_H4_TUSB is not set
-# CONFIG_MACH_OMAP_H4_OTG is not set
+CONFIG_MACH_OMAP_H4_OTG=y
# CONFIG_MACH_OMAP2_H4_USB1 is not set
# CONFIG_MACH_OMAP_APOLLON is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-# CONFIG_MACH_OMAP_2430SDP is not set
+# CONFIG_MACH_OMAP_2430OSK is not set
#
# Boot options
@@ -229,10 +248,6 @@ CONFIG_ARM_THUMB=y
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
@@ -241,6 +256,7 @@ CONFIG_ARM_THUMB=y
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
CONFIG_AEABI=y
@@ -253,6 +269,8 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
@@ -297,8 +315,11 @@ CONFIG_BINFMT_MISC=y
#
# Power management options
#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
#
# Networking
@@ -315,6 +336,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@@ -337,6 +359,7 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -344,8 +367,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -362,10 +383,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -373,6 +390,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
CONFIG_IRDA=y
#
@@ -401,19 +419,16 @@ CONFIG_IRCOMM=y
#
# Dongle support
#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
#
# FIR device drivers
#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_MCS_FIR is not set
CONFIG_OMAP_IR=y
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -435,6 +450,7 @@ CONFIG_OMAP_IR=y
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -449,6 +465,7 @@ CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -461,6 +478,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@@ -523,12 +541,19 @@ CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_OMAP_STI is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
#
# SCSI device support
@@ -546,24 +571,39 @@ CONFIG_NETDEVICES=y
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -581,7 +621,6 @@ CONFIG_INPUT=y
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
@@ -596,6 +635,7 @@ CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
@@ -616,6 +656,7 @@ CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -639,14 +680,6 @@ CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_OMAP_WATCHDOG=y
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_OMAP=m
# CONFIG_NVRAM is not set
@@ -658,13 +691,6 @@ CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_GPIO is not set
@@ -674,75 +700,112 @@ CONFIG_I2C_OMAP=y
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
+CONFIG_ISP1301_OMAP=y
# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_TLV320AIC23 is not set
CONFIG_GPIOEXPANDER_OMAP=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_LP5521 is not set
CONFIG_MENELAUS=y
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_HAVE_GPIO_LIB=y
#
-# SPI support
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_VIDEO_MEDIA is not set
#
-# Graphics support
+# Multimedia drivers
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
#
-# Display device support
+# Graphics support
#
-# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -753,11 +816,17 @@ CONFIG_FB_DEFERRED_IO=y
# Frame buffer hardware drivers
#
# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_OMAP=y
# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
@@ -782,24 +851,123 @@ CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
-# Enable Host or Gadget support to see Inventra options
+# Miscellaneous USB options
#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
#
-# USB Gadget Support
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-# CONFIG_USB_GADGET is not set
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
@@ -809,31 +977,22 @@ CONFIG_MMC=y
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_OMAP=y
+# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_UIO is not set
#
# CBUS support
#
# CONFIG_CBUS is not set
+# CONFIG_OMAP_DSP is not set
#
# File systems
@@ -845,22 +1004,20 @@ CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -890,7 +1047,6 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -906,27 +1062,27 @@ CONFIG_RAMFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -964,10 +1120,6 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
@@ -1008,22 +1160,15 @@ CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1034,6 +1179,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
@@ -1048,13 +1194,18 @@ CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
@@ -1063,49 +1214,90 @@ CONFIG_DEBUG_LL=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
--
1.5.5.1.148.g88e9e
