Hi,
* Koen Kooi <[EMAIL PROTECTED]> [080530 05:00]:
> From: Koen Kooi <[EMAIL PROTECTED]>
>
> omap3beagle: add a platform device to hook up the GPIO leds to the leds-gpio
> driver
> * on revision A5 and earlier board the two leds can't be controlled
> seperately, should be fixed in rev. B and C boards.
>
> Signed-off-by: Koen Kooi <[EMAIL PROTECTED]>
> ---
> arch/arm/mach-omap2/board-omap3beagle.c | 28 ++++++++++++++++++++++++++++
> 1 files changed, 28 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-omap3beagle.c
> b/arch/arm/mach-omap2/board-omap3beagle.c
> index c992cc7..83891fc 100644
> --- a/arch/arm/mach-omap2/board-omap3beagle.c
> +++ b/arch/arm/mach-omap2/board-omap3beagle.c
> @@ -19,6 +19,7 @@
> #include <linux/err.h>
> #include <linux/clk.h>
> #include <linux/io.h>
> +#include <linux/leds.h>
>
> #include <asm/hardware.h>
> #include <asm/mach-types.h>
> @@ -72,6 +73,32 @@ static struct omap_lcd_config omap3_beagle_lcd_config
> __initdata = {
> .ctrl_name = "internal",
> };
>
> +struct gpio_led gpio_leds[] = {
> + {
> + .name = "beagleboard::led0",
> + .default_trigger = "none",
> + .gpio = 149,
> + },
> + {
> + .name = "beagleboard::led1",
> + .default_trigger = "none",
> + .gpio = 150,
> + },
> +};
> +
> +static struct gpio_led_platform_data gpio_led_info = {
> + .leds = gpio_leds,
> + .num_leds = ARRAY_SIZE(gpio_leds),
> +};
> +
> +static struct platform_device leds_gpio = {
> + .name = "leds-gpio",
> + .id = -1,
> + .dev = {
> + .platform_data = &gpio_led_info,
> + },
> +};
> +
> static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
> { OMAP_TAG_UART, &omap3_beagle_uart_config },
> { OMAP_TAG_MMC, &omap3beagle_mmc_config },
Just one nitpicking cosmetic comment.. Can you please reformat the led structs
above using the standard Linux way with tabs:
...
{
.name = "beagleboard::led0",
.default_trigger = "none",
.gpio = 149,
},
...
Thanks,
Tony
> @@ -83,6 +110,7 @@ static struct platform_device *omap3_beagle_devices[]
> __initdata = {
> #ifdef CONFIG_RTC_DRV_TWL4030
> &omap3_beagle_twl4030rtc_device,
> #endif
> + &leds_gpio,
> };
>
> static void __init omap3_beagle_init(void)
> --
> 1.5.4.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
