- Changed register accesses to use prm_{read,write}_mod_reg and
prm_{set,clear,rmw}_mod_reg_bits() functions instread of
"REG_X = REG_Y" type accesses.
- Changed direct register clock enables/disables to clockframework calls.
- replaced cpu-related #ifdefs with if (cpu_is_xxxx()) calls.
- removed EFUSE related ifdefs
- added smartreflex_disable/enable calls to pm34xx.c suspend function.
- Added "SmartReflex support" entry into Kconfig under "System type->TI OMAP
Implementations". It depends on ARCH_OMAP34XX and TWL4030_CORE.
Signed-off-by: Kalle Jokiniemi <[EMAIL PROTECTED]>
---
arch/arm/mach-omap2/Makefile | 3 +
arch/arm/mach-omap2/pm34xx.c | 9 +
arch/arm/mach-omap2/smartreflex.c | 457 ++++++++++++++++++++++---------------
arch/arm/mach-omap2/smartreflex.h | 2 +-
arch/arm/plat-omap/Kconfig | 17 ++
5 files changed, 302 insertions(+), 186 deletions(-)
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 50c6657..f645b6e 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -25,6 +25,9 @@ obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
endif
+# SmartReflex driver
+obj-$(CONFIG_OMAP_SMARTREFLEX) += smartreflex.o
+
# Clock framework
obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 7e775cc..3da4f47 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -36,6 +36,7 @@
#include "prm.h"
#include "pm.h"
+#include "smartreflex.h"
struct power_state {
struct powerdomain *pwrdm;
@@ -256,6 +257,10 @@ static int omap3_pm_suspend(void)
struct power_state *pwrst;
int state, ret = 0;
+ /* XXX Disable smartreflex before entering suspend */
+ disable_smartreflex(SR1);
+ disable_smartreflex(SR2);
+
/* Read current next_pwrsts */
list_for_each_entry(pwrst, &pwrst_list, node)
pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
@@ -287,6 +292,10 @@ restore:
printk(KERN_INFO "Successfully put all powerdomains "
"to target state\n");
+ /* XXX Enable smartreflex after suspend */
+ enable_smartreflex(SR1);
+ enable_smartreflex(SR2);
+
return ret;
}
diff --git a/arch/arm/mach-omap2/smartreflex.c
b/arch/arm/mach-omap2/smartreflex.c
index dae7460..253369b 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -3,6 +3,9 @@
*
* OMAP34XX SmartReflex Voltage Control
*
+ * Copyright (C) 2008 Nokia Corporation
+ * Kalle Jokiniemi
+ *
* Copyright (C) 2007 Texas Instruments, Inc.
* Lesly A M <[EMAIL PROTECTED]>
*
@@ -20,13 +23,15 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/sysfs.h>
-
-#include <asm/arch/prcm.h>
-#include <asm/arch/power_companion.h>
+#include <linux/kobject.h>
+#include <linux/i2c/twl4030.h>
#include <linux/io.h>
-#include "prcm-regs.h"
+#include <asm/arch/omap34xx.h>
+
+#include "prm.h"
#include "smartreflex.h"
+#include "prm-regbits-34xx.h"
/* #define DEBUG_SR 1 */
@@ -37,11 +42,16 @@
# define DPRINTK(fmt, args...)
#endif
+/* XXX: These should be relocated where-ever the OPP implementation will be */
+u32 current_vdd1_opp;
+u32 current_vdd2_opp;
+
struct omap_sr{
int srid;
int is_sr_reset;
int is_autocomp_active;
struct clk *fck;
+ u32 clk_length;
u32 req_opp_no;
u32 opp1_nvalue, opp2_nvalue, opp3_nvalue, opp4_nvalue, opp5_nvalue;
u32 senp_mod, senn_mod;
@@ -53,6 +63,7 @@ static struct omap_sr sr1 = {
.srid = SR1,
.is_sr_reset = 1,
.is_autocomp_active = 0,
+ .clk_length = 0,
.srbase_addr = OMAP34XX_SR1_BASE,
};
@@ -60,6 +71,7 @@ static struct omap_sr sr2 = {
.srid = SR2,
.is_sr_reset = 1,
.is_autocomp_active = 0,
+ .clk_length = 0,
.srbase_addr = OMAP34XX_SR2_BASE,
};
@@ -85,8 +97,6 @@ static inline u32 sr_read_reg(struct omap_sr *sr, int offset)
return omap_readl(sr->srbase_addr + offset);
}
-
-#ifndef USE_EFUSE_VALUES
static void cal_reciprocal(u32 sensor, u32 *sengain, u32 *rnsen)
{
u32 gn, rn, mul;
@@ -100,7 +110,21 @@ static void cal_reciprocal(u32 sensor, u32 *sengain, u32
*rnsen)
}
}
}
-#endif
+
+static void sr_clk_get(struct omap_sr *sr)
+{
+ if (sr->srid == SR1) {
+ sr->fck = clk_get(NULL, "sr1_fck");
+ if (IS_ERR(sr->fck))
+ printk(KERN_ERR "Could not get sr1_fck\n");
+
+ } else if (sr->srid == SR2) {
+ sr->fck = clk_get(NULL, "sr2_fck");
+ if (IS_ERR(sr->fck))
+ printk(KERN_ERR "Could not get sr2_fck\n");
+
+ }
+}
static int sr_clk_enable(struct omap_sr *sr)
{
@@ -131,20 +155,48 @@ static int sr_clk_disable(struct omap_sr *sr)
return 0;
}
+static void sr_set_clk_length(struct omap_sr *sr)
+{
+ struct clk *osc_sys_ck;
+ u32 sys_clk = 0;
+
+ osc_sys_ck = clk_get(NULL, "osc_sys_ck");
+ sys_clk = clk_get_rate(osc_sys_ck);
+ clk_put(osc_sys_ck);
+
+ switch (sys_clk) {
+ case 12000000:
+ sr->clk_length = SRCLKLENGTH_12MHZ_SYSCLK;
+ break;
+ case 13000000:
+ sr->clk_length = SRCLKLENGTH_13MHZ_SYSCLK;
+ break;
+ case 19200000:
+ sr->clk_length = SRCLKLENGTH_19MHZ_SYSCLK;
+ break;
+ case 26000000:
+ sr->clk_length = SRCLKLENGTH_26MHZ_SYSCLK;
+ break;
+ case 38400000:
+ sr->clk_length = SRCLKLENGTH_38MHZ_SYSCLK;
+ break;
+ default :
+ printk(KERN_ERR "Invalid sysclk value: %d\n", sys_clk);
+ break;
+ }
+}
+
+/*
+ * TODO: once EFUSE is available, it should be used instead of these
+ * pre-calculated values.
+ */
static void sr_set_nvalues(struct omap_sr *sr)
{
-#ifdef USE_EFUSE_VALUES
- u32 n1, n2;
-#else
u32 senpval, sennval;
u32 senpgain, senngain;
u32 rnsenp, rnsenn;
-#endif
if (sr->srid == SR1) {
-#ifdef USE_EFUSE_VALUES
- /* Read values for VDD1 from EFUSE */
-#else
/* since E-Fuse Values are not available, calculating the
* reciprocal of the SenN and SenP values for SR1
*/
@@ -216,15 +268,16 @@ static void sr_set_nvalues(struct omap_sr *sr)
(rnsenp << NVALUERECIPROCAL_RNSENP_SHIFT) |
(rnsenn << NVALUERECIPROCAL_RNSENN_SHIFT));
+ /* XXX The clocks are enabled in the startup and NVALUE is
+ * set also there. Disabling this for now, but this could
+ * be related to dynamic sleep during boot */
+#if 0
sr_clk_enable(sr);
sr_write_reg(sr, NVALUERECIPROCAL, sr->opp3_nvalue);
sr_clk_disable(sr);
-
#endif
+
} else if (sr->srid == SR2) {
-#ifdef USE_EFUSE_VALUES
- /* Read values for VDD2 from EFUSE */
-#else
/* since E-Fuse Values are not available, calculating the
* reciprocal of the SenN and SenP values for SR2
*/
@@ -269,8 +322,6 @@ static void sr_set_nvalues(struct omap_sr *sr)
(senngain << NVALUERECIPROCAL_SENNGAIN_SHIFT) |
(rnsenp << NVALUERECIPROCAL_RNSENP_SHIFT) |
(rnsenn << NVALUERECIPROCAL_RNSENN_SHIFT));
-
-#endif
}
}
@@ -281,122 +332,145 @@ static void sr_configure_vp(int srid)
if (srid == SR1) {
vpconfig = PRM_VP1_CONFIG_ERROROFFSET | PRM_VP1_CONFIG_ERRORGAIN
- | PRM_VP1_CONFIG_INITVOLTAGE | PRM_VP1_CONFIG_TIMEOUTEN;
-
- PRM_VP1_CONFIG = vpconfig;
- PRM_VP1_VSTEPMIN = PRM_VP1_VSTEPMIN_SMPSWAITTIMEMIN |
- PRM_VP1_VSTEPMIN_VSTEPMIN;
-
- PRM_VP1_VSTEPMAX = PRM_VP1_VSTEPMAX_SMPSWAITTIMEMAX |
- PRM_VP1_VSTEPMAX_VSTEPMAX;
-
- PRM_VP1_VLIMITTO = PRM_VP1_VLIMITTO_VDDMAX |
- PRM_VP1_VLIMITTO_VDDMIN | PRM_VP1_VLIMITTO_TIMEOUT;
-
- PRM_VP1_CONFIG |= PRM_VP1_CONFIG_INITVDD;
- PRM_VP1_CONFIG &= ~PRM_VP1_CONFIG_INITVDD;
+ | PRM_VP1_CONFIG_INITVOLTAGE
+ | PRM_VP1_CONFIG_TIMEOUTEN;
+
+ prm_write_mod_reg(vpconfig, OMAP3430_GR_MOD,
+ OMAP3_PRM_VP1_CONFIG_OFFSET);
+ prm_write_mod_reg(PRM_VP1_VSTEPMIN_SMPSWAITTIMEMIN |
+ PRM_VP1_VSTEPMIN_VSTEPMIN,
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_VP1_VSTEPMIN_OFFSET);
+
+ prm_write_mod_reg(PRM_VP1_VSTEPMAX_SMPSWAITTIMEMAX |
+ PRM_VP1_VSTEPMAX_VSTEPMAX,
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_VP1_VSTEPMAX_OFFSET);
+
+ prm_write_mod_reg(PRM_VP1_VLIMITTO_VDDMAX |
+ PRM_VP1_VLIMITTO_VDDMIN |
+ PRM_VP1_VLIMITTO_TIMEOUT,
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_VP1_VLIMITTO_OFFSET);
+
+ /* Trigger initVDD value copy to voltage processor */
+ prm_set_mod_reg_bits(PRM_VP1_CONFIG_INITVDD, OMAP3430_GR_MOD,
+ OMAP3_PRM_VP1_CONFIG_OFFSET);
+ /* Clear initVDD copy trigger bit */
+ prm_clear_mod_reg_bits(PRM_VP1_CONFIG_INITVDD, OMAP3430_GR_MOD,
+ OMAP3_PRM_VP1_CONFIG_OFFSET);
} else if (srid == SR2) {
vpconfig = PRM_VP2_CONFIG_ERROROFFSET | PRM_VP2_CONFIG_ERRORGAIN
- | PRM_VP2_CONFIG_INITVOLTAGE | PRM_VP2_CONFIG_TIMEOUTEN;
-
- PRM_VP2_CONFIG = vpconfig;
- PRM_VP2_VSTEPMIN = PRM_VP2_VSTEPMIN_SMPSWAITTIMEMIN |
- PRM_VP2_VSTEPMIN_VSTEPMIN;
-
- PRM_VP2_VSTEPMAX = PRM_VP2_VSTEPMAX_SMPSWAITTIMEMAX |
- PRM_VP2_VSTEPMAX_VSTEPMAX;
-
- PRM_VP2_VLIMITTO = PRM_VP2_VLIMITTO_VDDMAX |
- PRM_VP2_VLIMITTO_VDDMIN | PRM_VP2_VLIMITTO_TIMEOUT;
-
- PRM_VP2_CONFIG |= PRM_VP2_CONFIG_INITVDD;
- PRM_VP2_CONFIG &= ~PRM_VP2_CONFIG_INITVDD;
+ | PRM_VP2_CONFIG_INITVOLTAGE
+ | PRM_VP2_CONFIG_TIMEOUTEN;
+
+ prm_write_mod_reg(vpconfig, OMAP3430_GR_MOD,
+ OMAP3_PRM_VP2_CONFIG_OFFSET);
+ prm_write_mod_reg(PRM_VP2_VSTEPMIN_SMPSWAITTIMEMIN |
+ PRM_VP2_VSTEPMIN_VSTEPMIN,
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_VP2_VSTEPMIN_OFFSET);
+
+ prm_write_mod_reg(PRM_VP2_VSTEPMAX_SMPSWAITTIMEMAX |
+ PRM_VP2_VSTEPMAX_VSTEPMAX,
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_VP2_VSTEPMAX_OFFSET);
+
+ prm_write_mod_reg(PRM_VP2_VLIMITTO_VDDMAX |
+ PRM_VP2_VLIMITTO_VDDMIN |
+ PRM_VP2_VLIMITTO_TIMEOUT,
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_VP2_VLIMITTO_OFFSET);
+
+ /* Trigger initVDD value copy to voltage processor */
+ prm_set_mod_reg_bits(PRM_VP2_CONFIG_INITVDD, OMAP3430_GR_MOD,
+ OMAP3_PRM_VP2_CONFIG_OFFSET);
+ /* Reset initVDD copy trigger bit */
+ prm_clear_mod_reg_bits(PRM_VP2_CONFIG_INITVDD, OMAP3430_GR_MOD,
+ OMAP3_PRM_VP2_CONFIG_OFFSET);
}
}
static void sr_configure_vc(void)
{
- PRM_VC_SMPS_SA =
- (R_SRI2C_SLAVE_ADDR << PRM_VC_SMPS_SA1_SHIFT) |
- (R_SRI2C_SLAVE_ADDR << PRM_VC_SMPS_SA0_SHIFT);
-
- PRM_VC_SMPS_VOL_RA = (R_VDD2_SR_CONTROL << PRM_VC_SMPS_VOLRA1_SHIFT) |
- (R_VDD1_SR_CONTROL << PRM_VC_SMPS_VOLRA0_SHIFT);
-
- PRM_VC_CMD_VAL_0 = (PRM_VC_CMD_VAL0_ON << PRM_VC_CMD_ON_SHIFT) |
- (PRM_VC_CMD_VAL0_ONLP << PRM_VC_CMD_ONLP_SHIFT) |
- (PRM_VC_CMD_VAL0_RET << PRM_VC_CMD_RET_SHIFT) |
- (PRM_VC_CMD_VAL0_OFF << PRM_VC_CMD_OFF_SHIFT);
-
- PRM_VC_CMD_VAL_1 = (PRM_VC_CMD_VAL1_ON << PRM_VC_CMD_ON_SHIFT) |
- (PRM_VC_CMD_VAL1_ONLP << PRM_VC_CMD_ONLP_SHIFT) |
- (PRM_VC_CMD_VAL1_RET << PRM_VC_CMD_RET_SHIFT) |
- (PRM_VC_CMD_VAL1_OFF << PRM_VC_CMD_OFF_SHIFT);
-
- PRM_VC_CH_CONF = PRM_VC_CH_CONF_CMD1 | PRM_VC_CH_CONF_RAV1;
-
- PRM_VC_I2C_CFG = PRM_VC_I2C_CFG_MCODE | PRM_VC_I2C_CFG_HSEN
- | PRM_VC_I2C_CFG_SREN;
+ prm_write_mod_reg((R_SRI2C_SLAVE_ADDR << OMAP3430_SMPS_SA1_SHIFT) |
+ (R_SRI2C_SLAVE_ADDR << OMAP3430_SMPS_SA0_SHIFT),
+ OMAP3430_GR_MOD, OMAP3_PRM_VC_SMPS_SA_OFFSET);
+
+ prm_write_mod_reg((R_VDD2_SR_CONTROL << OMAP3430_VOLRA1_SHIFT) |
+ (R_VDD1_SR_CONTROL << OMAP3430_VOLRA0_SHIFT),
+ OMAP3430_GR_MOD, OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET);
+
+ prm_write_mod_reg((OMAP3430_VC_CMD_VAL0_ON <<
+ OMAP3430_VC_CMD_ON_SHIFT) |
+ (OMAP3430_VC_CMD_VAL0_ONLP << OMAP3430_VC_CMD_ONLP_SHIFT) |
+ (OMAP3430_VC_CMD_VAL0_RET << OMAP3430_VC_CMD_RET_SHIFT) |
+ (OMAP3430_VC_CMD_VAL0_OFF << OMAP3430_VC_CMD_OFF_SHIFT),
+ OMAP3430_GR_MOD, OMAP3_PRM_VC_CMD_VAL_0_OFFSET);
+
+ prm_write_mod_reg((OMAP3430_VC_CMD_VAL1_ON <<
+ OMAP3430_VC_CMD_ON_SHIFT) |
+ (OMAP3430_VC_CMD_VAL1_ONLP << OMAP3430_VC_CMD_ONLP_SHIFT) |
+ (OMAP3430_VC_CMD_VAL1_RET << OMAP3430_VC_CMD_RET_SHIFT) |
+ (OMAP3430_VC_CMD_VAL1_OFF << OMAP3430_VC_CMD_OFF_SHIFT),
+ OMAP3430_GR_MOD, OMAP3_PRM_VC_CMD_VAL_1_OFFSET);
+
+ prm_write_mod_reg(OMAP3430_CMD1 | OMAP3430_RAV1,
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_VC_CH_CONF_OFFSET);
+
+ prm_write_mod_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN | OMAP3430_SREN,
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_VC_I2C_CFG_OFFSET);
/* Setup voltctrl and other setup times */
+ /* XXX CONFIG_SYSOFFMODE has not been implemented yet */
#ifdef CONFIG_SYSOFFMODE
- PRM_VOLTCTRL = PRM_VOLTCTRL_AUTO_OFF | PRM_VOLTCTRL_AUTO_RET;
- PRM_CLKSETUP = PRM_CLKSETUP_DURATION;
- PRM_VOLTSETUP1 = (PRM_VOLTSETUP_TIME2 << PRM_VOLTSETUP_TIME2_OFFSET) |
- (PRM_VOLTSETUP_TIME1 << PRM_VOLTSETUP_TIME1_OFFSET);
- PRM_VOLTOFFSET = PRM_VOLTOFFSET_DURATION;
- PRM_VOLTSETUP2 = PRM_VOLTSETUP2_DURATION;
+ prm_write_mod_reg(OMAP3430_AUTO_OFF | OMAP3430_AUTO_RET,
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_VOLTCTRL_OFFSET);
+
+ prm_write_mod_reg(OMAP3430_CLKSETUP_DURATION, OMAP3430_GR_MOD,
+ OMAP3_PRM_CLKSETUP_OFFSET);
+ prm_write_mod_reg((OMAP3430_VOLTSETUP_TIME2 <<
+ OMAP3430_VOLTSETUP_TIME2_OFFSET) |
+ (OMAP3430_VOLTSETUP_TIME1 <<
+ OMAP3430_VOLTSETUP_TIME1_OFFSET),
+ OMAP3430_GR_MOD, OMAP3_PRM_VOLTSETUP1_OFFSET);
+
+ prm_write_mod_reg(OMAP3430_VOLTOFFSET_DURATION, OMAP3430_GR_MOD,
+ OMAP3_PRM_VOLTOFFSET_OFFSET);
+ prm_write_mod_reg(OMAP3430_VOLTSETUP2_DURATION, OMAP3430_GR_MOD,
+ OMAP3_PRM_VOLTSETUP2_OFFSET);
#else
- PRM_VOLTCTRL |= PRM_VOLTCTRL_AUTO_RET;
+ prm_set_mod_reg_bits(OMAP3430_AUTO_RET, OMAP3430_GR_MOD,
+ OMAP3_PRM_VOLTCTRL_OFFSET);
#endif
}
-
static void sr_configure(struct omap_sr *sr)
{
- u32 sys_clk, sr_clk_length = 0;
u32 sr_config;
u32 senp_en , senn_en;
+ if (sr->clk_length == 0)
+ sr_set_clk_length(sr);
+
senp_en = sr->senp_mod;
senn_en = sr->senn_mod;
-
- sys_clk = prcm_get_system_clock_speed();
-
- switch (sys_clk) {
- case 12000:
- sr_clk_length = SRCLKLENGTH_12MHZ_SYSCLK;
- break;
- case 13000:
- sr_clk_length = SRCLKLENGTH_13MHZ_SYSCLK;
- break;
- case 19200:
- sr_clk_length = SRCLKLENGTH_19MHZ_SYSCLK;
- break;
- case 26000:
- sr_clk_length = SRCLKLENGTH_26MHZ_SYSCLK;
- break;
- case 38400:
- sr_clk_length = SRCLKLENGTH_38MHZ_SYSCLK;
- break;
- default :
- printk(KERN_ERR "Invalid sysclk value\n");
- break;
- }
-
- DPRINTK(KERN_DEBUG "SR : sys clk %lu\n", sys_clk);
if (sr->srid == SR1) {
sr_config = SR1_SRCONFIG_ACCUMDATA |
- (sr_clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
+ (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN |
SRCONFIG_MINMAXAVG_EN |
(senn_en << SRCONFIG_SENNENABLE_SHIFT) |
(senp_en << SRCONFIG_SENPENABLE_SHIFT) |
SRCONFIG_DELAYCTRL;
-
+ DPRINTK(KERN_DEBUG "setting SRCONFIG1 to 0x%08lx\n",
+ (unsigned long int) sr_config);
sr_write_reg(sr, SRCONFIG, sr_config);
sr_write_reg(sr, AVGWEIGHT, SR1_AVGWEIGHT_SENPAVGWEIGHT |
@@ -408,18 +482,18 @@ static void sr_configure(struct omap_sr *sr)
} else if (sr->srid == SR2) {
sr_config = SR2_SRCONFIG_ACCUMDATA |
- (sr_clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
+ (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN |
SRCONFIG_MINMAXAVG_EN |
(senn_en << SRCONFIG_SENNENABLE_SHIFT) |
(senp_en << SRCONFIG_SENPENABLE_SHIFT) |
SRCONFIG_DELAYCTRL;
+ DPRINTK(KERN_DEBUG "setting SRCONFIG2 to 0x%08lx\n",
+ (unsigned long int) sr_config);
sr_write_reg(sr, SRCONFIG, sr_config);
-
sr_write_reg(sr, AVGWEIGHT, SR2_AVGWEIGHT_SENPAVGWEIGHT |
SR2_AVGWEIGHT_SENNAVGWEIGHT);
-
sr_modify_reg(sr, ERRCONFIG, (SR_ERRWEIGHT_MASK |
SR_ERRMAXLIMIT_MASK | SR_ERRMINLIMIT_MASK),
(SR2_ERRWEIGHT | SR2_ERRMAXLIMIT | SR2_ERRMINLIMIT));
@@ -476,7 +550,6 @@ static void sr_enable(struct omap_sr *sr, u32 target_opp_no)
if (current_nvalue == nvalue_reciprocal) {
DPRINTK("System is already at the desired voltage level\n");
- return;
}
sr_write_reg(sr, NVALUERECIPROCAL, nvalue_reciprocal);
@@ -485,18 +558,18 @@ static void sr_enable(struct omap_sr *sr, u32
target_opp_no)
sr_modify_reg(sr, ERRCONFIG,
(ERRCONFIG_VPBOUNDINTEN | ERRCONFIG_VPBOUNDINTST),
(ERRCONFIG_VPBOUNDINTEN | ERRCONFIG_VPBOUNDINTST));
-
if (sr->srid == SR1) {
/* Enable VP1 */
- PRM_VP1_CONFIG |= PRM_VP1_CONFIG_VPENABLE;
+ prm_set_mod_reg_bits(PRM_VP1_CONFIG_VPENABLE, OMAP3430_GR_MOD,
+ OMAP3_PRM_VP1_CONFIG_OFFSET);
} else if (sr->srid == SR2) {
/* Enable VP2 */
- PRM_VP2_CONFIG |= PRM_VP2_CONFIG_VPENABLE;
+ prm_set_mod_reg_bits(PRM_VP2_CONFIG_VPENABLE, OMAP3430_GR_MOD,
+ OMAP3_PRM_VP2_CONFIG_OFFSET);
}
/* SRCONFIG - enable SR */
sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE);
-
}
static void sr_disable(struct omap_sr *sr)
@@ -507,11 +580,13 @@ static void sr_disable(struct omap_sr *sr)
sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, ~SRCONFIG_SRENABLE);
if (sr->srid == SR1) {
- /* Enable VP1 */
- PRM_VP1_CONFIG &= ~PRM_VP1_CONFIG_VPENABLE;
+ /* Disable VP1 */
+ prm_clear_mod_reg_bits(PRM_VP1_CONFIG_VPENABLE, OMAP3430_GR_MOD,
+ OMAP3_PRM_VP1_CONFIG_OFFSET);
} else if (sr->srid == SR2) {
- /* Enable VP2 */
- PRM_VP2_CONFIG &= ~PRM_VP2_CONFIG_VPENABLE;
+ /* Disable VP2 */
+ prm_clear_mod_reg_bits(PRM_VP2_CONFIG_VPENABLE, OMAP3430_GR_MOD,
+ OMAP3_PRM_VP2_CONFIG_OFFSET);
}
}
@@ -574,16 +649,13 @@ void enable_smartreflex(int srid)
if (sr->is_autocomp_active == 1) {
if (sr->is_sr_reset == 1) {
- if (srid == SR1) {
- /* Enable SR clks */
- CM_FCLKEN_WKUP |= SR1_CLK_ENABLE;
- target_opp_no = get_opp_no(current_vdd1_opp);
+ /* Enable SR clks */
+ sr_clk_enable(sr);
- } else if (srid == SR2) {
- /* Enable SR clks */
- CM_FCLKEN_WKUP |= SR2_CLK_ENABLE;
+ if (srid == SR1)
+ target_opp_no = get_opp_no(current_vdd1_opp);
+ else if (srid == SR2)
target_opp_no = get_opp_no(current_vdd2_opp);
- }
sr_configure(sr);
@@ -602,15 +674,6 @@ void disable_smartreflex(int srid)
sr = &sr2;
if (sr->is_autocomp_active == 1) {
- if (srid == SR1) {
- /* Enable SR clk */
- CM_FCLKEN_WKUP |= SR1_CLK_ENABLE;
-
- } else if (srid == SR2) {
- /* Enable SR clk */
- CM_FCLKEN_WKUP |= SR2_CLK_ENABLE;
- }
-
if (sr->is_sr_reset == 0) {
sr->is_sr_reset = 1;
@@ -618,17 +681,18 @@ void disable_smartreflex(int srid)
sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE,
~SRCONFIG_SRENABLE);
+ /* Disable SR clk */
+ sr_clk_disable(sr);
if (sr->srid == SR1) {
- /* Disable SR clk */
- CM_FCLKEN_WKUP &= ~SR1_CLK_ENABLE;
- /* Enable VP1 */
- PRM_VP1_CONFIG &= ~PRM_VP1_CONFIG_VPENABLE;
-
+ /* Disable VP1 */
+ prm_clear_mod_reg_bits(PRM_VP1_CONFIG_VPENABLE,
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_VP1_CONFIG_OFFSET);
} else if (sr->srid == SR2) {
- /* Disable SR clk */
- CM_FCLKEN_WKUP &= ~SR2_CLK_ENABLE;
- /* Enable VP2 */
- PRM_VP2_CONFIG &= ~PRM_VP2_CONFIG_VPENABLE;
+ /* Disable VP2 */
+ prm_clear_mod_reg_bits(PRM_VP2_CONFIG_VPENABLE,
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_VP2_CONFIG_OFFSET);
}
}
}
@@ -638,7 +702,6 @@ void disable_smartreflex(int srid)
/* Voltage Scaling using SR VCBYPASS */
int sr_voltagescale_vcbypass(u32 target_opp, u8 vsel)
{
- int ret;
int sr_status = 0;
u32 vdd, target_opp_no;
u32 vc_bypass_value;
@@ -651,39 +714,53 @@ int sr_voltagescale_vcbypass(u32 target_opp, u8 vsel)
if (vdd == PRCM_VDD1) {
sr_status = sr_stop_vddautocomap(SR1);
- PRM_VC_CMD_VAL_0 = (PRM_VC_CMD_VAL_0 & ~PRM_VC_CMD_ON_MASK) |
- (vsel << PRM_VC_CMD_ON_SHIFT);
+ prm_rmw_mod_reg_bits(OMAP3430_VC_CMD_ON_MASK,
+ (vsel << OMAP3430_VC_CMD_ON_SHIFT),
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_VC_CMD_VAL_0_OFFSET);
reg_addr = R_VDD1_SR_CONTROL;
} else if (vdd == PRCM_VDD2) {
sr_status = sr_stop_vddautocomap(SR2);
- PRM_VC_CMD_VAL_1 = (PRM_VC_CMD_VAL_1 & ~PRM_VC_CMD_ON_MASK) |
- (vsel << PRM_VC_CMD_ON_SHIFT);
+ prm_rmw_mod_reg_bits(OMAP3430_VC_CMD_ON_MASK,
+ (vsel << OMAP3430_VC_CMD_ON_SHIFT),
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_VC_CMD_VAL_1_OFFSET);
reg_addr = R_VDD2_SR_CONTROL;
}
- vc_bypass_value = (vsel << PRM_VC_BYPASS_DATA_SHIFT) |
- (reg_addr << PRM_VC_BYPASS_REGADDR_SHIFT) |
- (R_SRI2C_SLAVE_ADDR << PRM_VC_BYPASS_SLAVEADDR_SHIFT);
+ vc_bypass_value = (vsel << OMAP3430_DATA_SHIFT) |
+ (reg_addr << OMAP3430_REGADDR_SHIFT) |
+ (R_SRI2C_SLAVE_ADDR << OMAP3430_SLAVEADDR_SHIFT);
- PRM_VC_BYPASS_VAL = vc_bypass_value;
+ prm_write_mod_reg(vc_bypass_value, OMAP3430_GR_MOD,
+ OMAP3_PRM_VC_BYPASS_VAL_OFFSET);
- PRM_VC_BYPASS_VAL |= PRM_VC_BYPASS_VALID;
+ vc_bypass_value = prm_set_mod_reg_bits(OMAP3430_VALID, OMAP3430_GR_MOD,
+ OMAP3_PRM_VC_BYPASS_VAL_OFFSET);
- DPRINTK("%s : PRM_VC_BYPASS_VAL %X\n", __func__, PRM_VC_BYPASS_VAL);
- DPRINTK("PRM_IRQST_MPU %X\n", PRM_IRQSTATUS_MPU);
+ DPRINTK("%s : PRM_VC_BYPASS_VAL %X\n", __func__, vc_bypass_value);
+ DPRINTK("PRM_IRQST_MPU %X\n", prm_read_mod_reg(OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET));
- while ((PRM_VC_BYPASS_VAL & PRM_VC_BYPASS_VALID) != 0x0) {
- ret = loop_wait(&loop_cnt, &retries_cnt, 10);
- if (ret != PRCM_PASS) {
+ while ((vc_bypass_value & OMAP3430_VALID) != 0x0) {
+ loop_cnt++;
+ if (retries_cnt > 10) {
printk(KERN_INFO "Loop count exceeded in check SR I2C"
"write\n");
- return ret;
+ return SR_FAIL;
}
+ if (loop_cnt > 50) {
+ retries_cnt++;
+ loop_cnt = 0;
+ udelay(10);
+ }
+ vc_bypass_value = prm_read_mod_reg(OMAP3430_GR_MOD,
+ OMAP3_PRM_VC_BYPASS_VAL_OFFSET);
}
- omap_udelay(T2_SMPS_UPDATE_DELAY);
+ udelay(T2_SMPS_UPDATE_DELAY);
if (sr_status) {
if (vdd == PRCM_VDD1)
@@ -696,13 +773,15 @@ int sr_voltagescale_vcbypass(u32 target_opp, u8 vsel)
}
/* Sysfs interface to select SR VDD1 auto compensation */
-static ssize_t omap_sr_vdd1_autocomp_show(struct kset *subsys, char *buf)
+static ssize_t omap_sr_vdd1_autocomp_show(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
{
return sprintf(buf, "%d\n", sr1.is_autocomp_active);
}
-static ssize_t omap_sr_vdd1_autocomp_store(struct kset *subsys,
- const char *buf, size_t n)
+static ssize_t omap_sr_vdd1_autocomp_store(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ const char *buf, size_t n)
{
u32 current_vdd1opp_no;
unsigned short value;
@@ -722,7 +801,7 @@ static ssize_t omap_sr_vdd1_autocomp_store(struct kset
*subsys,
return n;
}
-static struct subsys_attribute sr_vdd1_autocomp = {
+static struct kobj_attribute sr_vdd1_autocomp = {
.attr = {
.name = __stringify(sr_vdd1_autocomp),
.mode = 0644,
@@ -732,13 +811,15 @@ static struct subsys_attribute sr_vdd1_autocomp = {
};
/* Sysfs interface to select SR VDD2 auto compensation */
-static ssize_t omap_sr_vdd2_autocomp_show(struct kset *subsys, char *buf)
+static ssize_t omap_sr_vdd2_autocomp_show(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
{
return sprintf(buf, "%d\n", sr2.is_autocomp_active);
}
-static ssize_t omap_sr_vdd2_autocomp_store(struct kset *subsys,
- const char *buf, size_t n)
+static ssize_t omap_sr_vdd2_autocomp_store(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ const char *buf, size_t n)
{
u32 current_vdd2opp_no;
unsigned short value;
@@ -758,7 +839,7 @@ static ssize_t omap_sr_vdd2_autocomp_store(struct kset
*subsys,
return n;
}
-static struct subsys_attribute sr_vdd2_autocomp = {
+static struct kobj_attribute sr_vdd2_autocomp = {
.attr = {
.name = __stringify(sr_vdd2_autocomp),
.mode = 0644,
@@ -774,15 +855,19 @@ static int __init omap3_sr_init(void)
int ret = 0;
u8 RdReg;
-#ifdef CONFIG_ARCH_OMAP34XX
- sr1.fck = clk_get(NULL, "sr1_fck");
- if (IS_ERR(sr1.fck))
- printk(KERN_ERR "Could not get sr1_fck\n");
-
- sr2.fck = clk_get(NULL, "sr2_fck");
- if (IS_ERR(sr2.fck))
- printk(KERN_ERR "Could not get sr2_fck\n");
-#endif /* #ifdef CONFIG_ARCH_OMAP34XX */
+ if (is_sil_rev_greater_than(OMAP3430_REV_ES1_0)) {
+ current_vdd1_opp = PRCM_VDD1_OPP3;
+ current_vdd2_opp = PRCM_VDD2_OPP3;
+ } else {
+ current_vdd1_opp = PRCM_VDD1_OPP1;
+ current_vdd2_opp = PRCM_VDD1_OPP1;
+ }
+ if (cpu_is_omap34xx()) {
+ sr_clk_get(&sr1);
+ sr_clk_get(&sr2);
+ }
+ sr_set_clk_length(&sr1);
+ sr_set_clk_length(&sr2);
/* Call the VPConfig, VCConfig, set N Values. */
sr_set_nvalues(&sr1);
@@ -794,22 +879,24 @@ static int __init omap3_sr_init(void)
sr_configure_vc();
/* Enable SR on T2 */
- ret = t2_in(PM_RECEIVER, &RdReg, R_DCDC_GLOBAL_CFG);
- RdReg |= DCDC_GLOBAL_CFG_ENABLE_SRFLX;
- ret |= t2_out(PM_RECEIVER, RdReg, R_DCDC_GLOBAL_CFG);
+ ret = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &RdReg,
+ R_DCDC_GLOBAL_CFG);
+ RdReg |= DCDC_GLOBAL_CFG_ENABLE_SRFLX;
+ ret |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, RdReg,
+ R_DCDC_GLOBAL_CFG);
printk(KERN_INFO "SmartReflex driver initialized\n");
- ret = subsys_create_file(&power_subsys, &sr_vdd1_autocomp);
+ ret = sysfs_create_file(power_kobj, &sr_vdd1_autocomp.attr);
if (ret)
- printk(KERN_ERR "subsys_create_file failed: %d\n", ret);
+ printk(KERN_ERR "sysfs_create_file failed: %d\n", ret);
- ret = subsys_create_file(&power_subsys, &sr_vdd2_autocomp);
+ ret = sysfs_create_file(power_kobj, &sr_vdd2_autocomp.attr);
if (ret)
- printk(KERN_ERR "subsys_create_file failed: %d\n", ret);
+ printk(KERN_ERR "sysfs_create_file failed: %d\n", ret);
return 0;
}
-arch_initcall(omap3_sr_init);
+late_initcall(omap3_sr_init);
diff --git a/arch/arm/mach-omap2/smartreflex.h
b/arch/arm/mach-omap2/smartreflex.h
index 2091a15..d7ccd46 100644
--- a/arch/arm/mach-omap2/smartreflex.h
+++ b/arch/arm/mach-omap2/smartreflex.h
@@ -238,7 +238,7 @@ extern u32 current_vdd2_opp;
* NOTE: if smartreflex is not enabled from sysfs, these functions will not
* do anything.
*/
-#if defined(CONFIG_ARCH_OMAP34XX) && defined(CONFIG_TWL4030_CORE)
+#ifdef CONFIG_OMAP_SMARTREFLEX
void enable_smartreflex(int srid);
void disable_smartreflex(int srid);
#else
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index b085b07..53745ce 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -56,6 +56,23 @@ config OMAP_DEBUG_CLOCKDOMAIN
for every clockdomain register write. However, the
extra detail costs some memory.
+config OMAP_SMARTREFLEX
+ bool "SmartReflex support"
+ depends on ARCH_OMAP34XX && TWL4030_CORE
+ help
+ Say Y if you want to enable SmartReflex.
+
+ SmartReflex can perform continuous dynamic voltage
+ scaling around the nominal operating point voltage
+ according to silicon characteristics and operating
+ conditions. Enabling SmartReflex reduces power
+ consumption.
+
+ Please note, that by default SmartReflex is only
+ initialized. To enable the automatic voltage
+ compensation for VDD1 and VDD2, user must write 1 to
+ /sys/power/sr_vddX_autocomp, where X is 1 or 2.
+
config OMAP_RESET_CLOCKS
bool "Reset unused clocks during boot"
depends on ARCH_OMAP
--
1.5.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
