The problem is solved.. had made a silly mistake of copying the uImage to the wrong location. when i did imls it didnt show any kernel images in the flash.. thanx regards, Shareef
On Tue, Jun 3, 2008 at 2:03 PM, mohammed shareef <[EMAIL PROTECTED]> wrote: > i am using uImage only.. > > here is what i do to make an image after compiling the kernel: > > arm-linux-objcopy -O binary -R .note -R .comment -S > arch/arm/boot/compressed/vmlinux linux.bin > > gzip -9 linux.bin > > /tools/mkimage -A arm -O linux -T kernel -C gzip -a 0x10c08000 -e > 0x10c08000 -n 'Linux Kernel Image' -d linux.bin.gz uImage.cc > > regards, > Shareef > > On Tue, Jun 3, 2008 at 12:16 AM, Felipe Balbi <[EMAIL PROTECTED]> wrote: >> On Mon, Jun 02, 2008 at 11:13:48PM +0530, mohammed shareef wrote: >>> Hi, >>> >>> i tried to re-compile my kernel by adding a few features and then >>> transfered the new image using u-boot. Unfortunately am getting the >>> following error: >>> >>> ## Booting image at 00100000 ... >>> Bad Magic Number >>> OMAP5912 OSK # >>> >>> The transfer seems to be complete and proper. all the environment >>> variables are also ok. i tried replacing the new image with the >>> previous working image. that also fails. could some one tell me whats >>> worng? >> >> use uImage instead of zImage >> >> -- >> Best Regards, >> >> Felipe Balbi >> [EMAIL PROTECTED] >> http://blog.felipebalbi.com >> > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
