I see that the drivers getting loaded are the ALSA drivers. You are trying to create the nodes which usually the OSS applications use to talk to the OSS audio drivers. Unless you have the OSS emulation enabled in the kernel/user space, you can't use the audio device through these nodes. Use some ALSA application. Refer to ALSA website for creating your own sample application. Also you will need to create the device nodes for ALSA and also place the config files accordingly.
Please someone correct me if I am wrong. Regards, Suresh -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of mohammed shareef Sent: Tuesday, June 10, 2008 7:34 AM To: omap; [EMAIL PROTECTED] Subject: omap osk audio Dear all, I am working on omap osk. i want to enable audio on it. But am not able to do that. The kernel boot log says it has initialized audio device. but i am not able to configure the audio setting nor run some recording code. the system hangs and i have to restart. the kernel boot code says: TLV320AIC23 I2C version 1.8 (10-Feb-2006) audio support initialized ALSA device list: #0: OSK AIC23 i have created nodes: # mknod /dev/mixer c 14 0 # mknod /dev/dsp c 14 3 thanx, Shareef -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
