Signed-off-by: chandra shekhar <[EMAIL PROTECTED]>
---
arch/arm/mach-omap2/mcbsp.c | 187 ++++++++++++++++++++++++++++++++++++++
include/asm-arm/arch-omap/mcbsp.h | 79 ++++++++++++++++
2 files changed, 266 insertions(+)
Index: linux-omap-2.6/arch/arm/mach-omap2/mcbsp.c
===================================================================
--- linux-omap-2.6.orig/arch/arm/mach-omap2/mcbsp.c 2008-06-16
16:10:03.000000000 +0530
+++ linux-omap-2.6/arch/arm/mach-omap2/mcbsp.c 2008-06-16 16:12:43.061346294
+0530
@@ -24,6 +24,7 @@
#include <asm/arch/cpu.h>
#include <asm/arch/mcbsp.h>
+struct omap_mcbsp_reg_cfg mcbsp_cfg = {0};
struct mcbsp_internal_clk {
struct clk clk;
struct clk **childs;
@@ -217,6 +218,192 @@
if (mcbsp_dma_tx->tx_callback != NULL)
mcbsp_dma_tx->tx_callback(ch_status, mcbsp_dma_tx->tx_cb_arg);
}
+
+/*
+ * Set McBSP recv parameters
+ * id : McBSP interface ID
+ * mcbsp_cfg : McBSP register configuration
+ * rp : McBSP recv parameters
+ */
+void omap2_mcbsp_set_recv_param(unsigned int id,
+ struct omap_mcbsp_reg_cfg *mcbsp_cfg,
+ struct omap_mcbsp_cfg_param *rp)
+{
+ u32 io_base;
+ io_base = mcbsp[id].io_base;
+
+ mcbsp_cfg->spcr1 = RJUST(rp->justification);
+ mcbsp_cfg->rcr2 = RCOMPAND(rp->reverse_compand) |
+ RDATDLY(rp->data_delay);
+ if (rp->phase == OMAP_MCBSP_FRAME_SINGLEPHASE)
+ mcbsp_cfg->rcr2 = mcbsp_cfg->rcr2 & ~(RPHASE);
+ else
+ mcbsp_cfg->rcr2 = mcbsp_cfg->rcr2 | (RPHASE) |
+ RWDLEN2(rp->word_length2) | RFRLEN2(rp->frame_length2);
+ mcbsp_cfg->rcr1 = RWDLEN1(rp->word_length1) |
+ RFRLEN1(rp->frame_length1);
+ if (rp->fsync_src == OMAP_MCBSP_RXFSYNC_INTERNAL)
+ mcbsp_cfg->pcr0 = mcbsp_cfg->pcr0 | FSRM;
+ if (rp->clk_mode == OMAP_MCBSP_CLKRXSRC_INTERNAL)
+ mcbsp_cfg->pcr0 = mcbsp_cfg->pcr0 | CLKRM;
+ if (rp->clk_polarity == OMAP_MCBSP_CLKR_POLARITY_RISING)
+ mcbsp_cfg->pcr0 = mcbsp_cfg->pcr0 | CLKRP;
+ if (rp->fs_polarity == OMAP_MCBSP_FS_ACTIVE_LOW)
+ mcbsp_cfg->pcr0 = mcbsp_cfg->pcr0 | FSRP;
+ return;
+
+}
+
+/*
+ * Set McBSP transmit parameters
+ * id : McBSP interface ID
+ * mcbsp_cfg : McBSP register configuration
+ * tp : McBSP transmit parameters
+ */
+
+void omap2_mcbsp_set_trans_param(unsigned int id,
+ struct omap_mcbsp_reg_cfg *mcbsp_cfg,
+ struct omap_mcbsp_cfg_param *tp)
+{
+ mcbsp_cfg->xcr2 = XCOMPAND(tp->reverse_compand) |
+ XDATDLY(tp->data_delay);
+ if (tp->phase == OMAP_MCBSP_FRAME_SINGLEPHASE)
+ mcbsp_cfg->xcr2 = mcbsp_cfg->xcr2 & ~(XPHASE);
+ else
+ mcbsp_cfg->xcr2 = mcbsp_cfg->xcr2 | (XPHASE) |
+ RWDLEN2(tp->word_length2) | RFRLEN2(tp->frame_length2);
+ mcbsp_cfg->xcr1 = XWDLEN1(tp->word_length1) |
+ XFRLEN1(tp->frame_length1);
+ if (tp->fs_polarity == OMAP_MCBSP_FS_ACTIVE_LOW)
+ mcbsp_cfg->pcr0 = mcbsp_cfg->pcr0 | FSXP;
+ if (tp->fsync_src == OMAP_MCBSP_TXFSYNC_INTERNAL)
+ mcbsp_cfg->pcr0 = mcbsp_cfg->pcr0 | FSXM;
+ if (tp->clk_mode == OMAP_MCBSP_CLKTXSRC_INTERNAL)
+ mcbsp_cfg->pcr0 = mcbsp_cfg->pcr0 | CLKXM;
+ if (tp->clk_polarity == OMAP_MCBSP_CLKX_POLARITY_FALLING)
+ mcbsp_cfg->pcr0 = mcbsp_cfg->pcr0 | CLKXP;
+ return;
+
+}
+
+ /*
+ * Set McBSP SRG configuration
+ * id : McBSP interface ID
+ * mcbsp_cfg : McBSP register configuration
+ * interface_mode : Master/Slave
+ * param : McBSP SRG and FSG configuration
+ */
+
+void omap2_mcbsp_set_srg_cfg_param(unsigned int id, int interface_mode,
+ struct omap_mcbsp_reg_cfg *mcbsp_cfg,
+ struct omap_mcbsp_srg_fsg_cfg *param)
+{
+ u32 io_base;
+ u32 clk_rate, clkgdv;
+ io_base = mcbsp[id].io_base;
+
+ mcbsp[id].interface_mode = interface_mode;
+ mcbsp_cfg->srgr1 = FWID(param->pulse_width);
+
+ if (interface_mode == OMAP_MCBSP_MASTER) {
+ /* clk_rate = clk_get_rate(omap_mcbsp_clk[id].fck); */
+ clk_rate = 96000000;
+ clkgdv = clk_rate / (param->sample_rate *
+ (param->bits_per_sample - 1));
+ mcbsp_cfg->srgr1 = mcbsp_cfg->srgr1 | CLKGDV(clkgdv);
+ }
+ if (param->dlb)
+ mcbsp_cfg->spcr1 = mcbsp_cfg->spcr1 & ~(ALB);
+
+ if (param->sync_mode == OMAP_MCBSP_SRG_FREERUNNING)
+ mcbsp_cfg->spcr2 = mcbsp_cfg->spcr2 | FREE;
+ mcbsp_cfg->srgr2 = FPER(param->period)|(param->fsgm? FSGM : 0);
+
+ switch (param->srg_src) {
+
+ case OMAP_MCBSP_SRGCLKSRC_CLKS:
+ mcbsp_cfg->pcr0 = mcbsp_cfg->pcr0 & ~(SCLKME);
+ mcbsp_cfg->srgr2 = mcbsp_cfg->srgr2 & ~(CLKSM);
+ /*
+ * McBSP master operation at low voltage is only possible if
+ * CLKSP=0 In Master mode, if client driver tries to configiure
+ * input clock polarity as falling edge, we force it to Rising
+ */
+
+ if ((param->polarity == OMAP_MCBSP_CLKS_POLARITY_RISING) ||
+ (interface_mode == OMAP_MCBSP_MASTER))
+ mcbsp_cfg->srgr2 = mcbsp_cfg->srgr2 & ~(CLKSP);
+ else
+ mcbsp_cfg->srgr2 = mcbsp_cfg->srgr2 | (CLKSP);
+ break;
+
+
+ case OMAP_MCBSP_SRGCLKSRC_FCLK:
+ mcbsp_cfg->pcr0 = mcbsp_cfg->pcr0 & ~(SCLKME);
+ mcbsp_cfg->srgr2 = mcbsp_cfg->srgr2 | (CLKSM);
+
+ break;
+
+ case OMAP_MCBSP_SRGCLKSRC_CLKR:
+ mcbsp_cfg->pcr0 = mcbsp_cfg->pcr0 | (SCLKME);
+ mcbsp_cfg->srgr2 = mcbsp_cfg->srgr2 & ~(CLKSM);
+ if (param->polarity == OMAP_MCBSP_CLKR_POLARITY_FALLING)
+ mcbsp_cfg->pcr0 = mcbsp_cfg->pcr0 & ~(CLKRP);
+ else
+ mcbsp_cfg->pcr0 = mcbsp_cfg->pcr0 | (CLKRP);
+
+ break;
+
+ case OMAP_MCBSP_SRGCLKSRC_CLKX:
+ mcbsp_cfg->pcr0 = mcbsp_cfg->pcr0 | (SCLKME);
+ mcbsp_cfg->srgr2 = mcbsp_cfg->srgr2 | (CLKSM);
+
+ if (param->polarity == OMAP_MCBSP_CLKX_POLARITY_RISING)
+ mcbsp_cfg->pcr0 = mcbsp_cfg->pcr0 & ~(CLKXP);
+ else
+ mcbsp_cfg->pcr0 = mcbsp_cfg->pcr0 | (CLKXP);
+ break;
+
+ }
+ if (param->sync_mode == OMAP_MCBSP_SRG_FREERUNNING)
+ mcbsp_cfg->srgr2 = mcbsp_cfg->srgr2 & ~(GSYNC);
+ else if (param->sync_mode == OMAP_MCBSP_SRG_RUNNING)
+ mcbsp_cfg->srgr2 = mcbsp_cfg->srgr2 | (GSYNC);
+
+ mcbsp_cfg->xccr = omap_mcbsp_read(io_base, OMAP_MCBSP_REG_XCCR);
+ if (param->dlb)
+ mcbsp_cfg->xccr = mcbsp_cfg->xccr | (DILB);
+ mcbsp_cfg->rccr = omap_mcbsp_read(io_base, OMAP_MCBSP_REG_RCCR);
+
+ return;
+}
+
+/*
+ * configure the McBSP registers
+ * id : McBSP interface ID
+ * interface_mode : Master/Slave
+ * rp : McBSP recv parameters
+ * tp : McBSP transmit parameters
+ * param : McBSP SRG and FSG configuration
+ */
+int omap2_mcbsp_params_cfg(unsigned int id, int interface_mode,
+ struct omap_mcbsp_cfg_param *rp,
+ struct omap_mcbsp_cfg_param *tp,
+ struct omap_mcbsp_srg_fsg_cfg *param)
+{
+ if (rp)
+ omap2_mcbsp_set_recv_param(id, &mcbsp_cfg, rp);
+ if (tp)
+ omap2_mcbsp_set_trans_param(id, &mcbsp_cfg, tp);
+ if (param)
+ omap2_mcbsp_set_srg_cfg_param(id,
+ interface_mode, &mcbsp_cfg, param);
+ omap_mcbsp_config(id, &mcbsp_cfg);
+
+ return (0);
+}
+EXPORT_SYMBOL(omap2_mcbsp_params_cfg);
+
/*
* Enable/Disable the sample rate generator
* id : McBSP interface ID
Index: linux-omap-2.6/include/asm-arm/arch-omap/mcbsp.h
===================================================================
--- linux-omap-2.6.orig/include/asm-arm/arch-omap/mcbsp.h 2008-06-16
16:05:49.000000000 +0530
+++ linux-omap-2.6/include/asm-arm/arch-omap/mcbsp.h 2008-06-16
16:11:51.119021130 +0530
@@ -277,6 +277,81 @@
#define OMAP_MCBSP_XRST_DISABLE 0
#define OMAP_MCBSP_XRST_ENABLE 1
+#define OMAP_MCBSP_FRAME_SINGLEPHASE 1
+
+/* Sample Rate Generator Clock source */
+#define OMAP_MCBSP_SRGCLKSRC_CLKS 1
+#define OMAP_MCBSP_SRGCLKSRC_FCLK 2
+#define OMAP_MCBSP_SRGCLKSRC_CLKR 3
+#define OMAP_MCBSP_SRGCLKSRC_CLKX 4
+
+/* SRG input clock polarity */
+#define OMAP_MCBSP_CLKS_POLARITY_RISING 1
+#define OMAP_MCBSP_CLKS_POLARITY_FALLING 2
+
+#define OMAP_MCBSP_CLKX_POLARITY_RISING 1
+#define OMAP_MCBSP_CLKX_POLARITY_FALLING 2
+
+#define OMAP_MCBSP_CLKR_POLARITY_RISING 1
+#define OMAP_MCBSP_CLKR_POLARITY_FALLING 2
+
+/* SRG Clock synchronization mode */
+#define OMAP_MCBSP_SRG_FREERUNNING 1
+#define OMAP_MCBSP_SRG_RUNNING 2
+
+/* Frame Sync Source */
+#define OMAP_MCBSP_TXFSYNC_EXTERNAL 0
+#define OMAP_MCBSP_TXFSYNC_INTERNAL 1
+
+#define OMAP_MCBSP_RXFSYNC_EXTERNAL 0
+#define OMAP_MCBSP_RXFSYNC_INTERNAL 1
+
+#define OMAP_MCBSP_CLKRXSRC_EXTERNAL 1
+#define OMAP_MCBSP_CLKRXSRC_INTERNAL 2
+
+#define OMAP_MCBSP_CLKTXSRC_EXTERNAL 1
+#define OMAP_MCBSP_CLKTXSRC_INTERNAL 2
+
+/* Justification */
+#define OMAP_MCBSP_RJUST_ZEROMSB 0
+#define OMAP_MCBSP_RJUST_SIGNMSB 1
+#define OMAP_MCBSP_LJUST_ZEROLSB 2
+
+#define OMAP_MCBSP_DATADELAY0 0
+#define OMAP_MCBSP_DATADELAY1 1
+#define OMAP_MCBSP_DATADELAY2 2
+
+/* Reverse mode for 243X and 34XX */
+#define OMAP_MCBSP_MSBFIRST 0
+#define OMAP_MCBSP_LSBFIRST 1
+
+struct omap_mcbsp_cfg_param {
+ u8 fsync_src;
+ u8 fs_polarity;
+ u8 clk_polarity;
+ u8 clk_mode;
+ u8 frame_length1;
+ u8 frame_length2;
+ u8 word_length1;
+ u8 word_length2;
+ u8 justification;
+ u8 reverse_compand;
+ u8 phase;
+ u8 data_delay;
+};
+
+struct omap_mcbsp_srg_fsg_cfg {
+ u32 period; /* Frame period */
+ u32 pulse_width; /* Frame width */
+ u8 fsgm;
+ u32 sample_rate;
+ u32 bits_per_sample;
+ u32 srg_src;
+ u8 sync_mode; /* SRG free running mode */
+ u8 polarity;
+ u8 dlb; /* digital loopback mode */
+};
+
/* we don't do multichannel for now */
struct omap_mcbsp_reg_cfg {
u32 spcr2;
@@ -476,4 +551,8 @@
int omap2_mcbsp_send_data(unsigned int id, void *cbdata,
dma_addr_t buf_start_addr, u32 buf_size);
+int omap2_mcbsp_params_cfg(unsigned int id, int interface_mode,
+ struct omap_mcbsp_cfg_param *rp,
+ struct omap_mcbsp_cfg_param *tp,
+ struct omap_mcbsp_srg_fsg_cfg *param);
#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
