This patch fixes few of the comments posted on the patch set till now.
One major fix is the moving of uart clock enable/disable out of the context
save path as pointed out by Jouni.
This would leave the UART clcoks disabled in case a CORE OFF was attempted and
not achieved.
Signed-off-by: Rajendra Nayak <[EMAIL PROTECTED]>
---
arch/arm/mach-omap2/cpuidle34xx.c | 56 ++++++++++++++------------------------
1 files changed, 22 insertions(+), 34 deletions(-)
Index: linux-omap-2.6/arch/arm/mach-omap2/cpuidle34xx.c
===================================================================
--- linux-omap-2.6.orig/arch/arm/mach-omap2/cpuidle34xx.c 2008-07-03
10:50:04.000000000 +0530
+++ linux-omap-2.6/arch/arm/mach-omap2/cpuidle34xx.c 2008-07-03
13:11:13.435048828 +0530
@@ -405,9 +405,7 @@ void omap3_save_core_ctx(void)
/* Save the system control module context, padconf already save above*/
omap_save_control_ctx();
omap_save_uart_ctx(0);
- omap_serial_enable_clocks(0, 0);
omap_save_uart_ctx(1);
- omap_serial_enable_clocks(0, 1);
}
void omap3_restore_core_ctx(void)
@@ -418,9 +416,7 @@ void omap3_restore_core_ctx(void)
omap_restore_gpmc_ctx();
/* Restore the interrupt controller context */
omap_restore_intc_ctx();
- omap_serial_enable_clocks(1, 0);
omap_restore_uart_ctx(0);
- omap_serial_enable_clocks(1, 1);
omap_restore_uart_ctx(1);
padconf_saved = 0;
}
@@ -472,28 +468,27 @@ static int omap3_enter_idle(struct cpuid
/* Program MPU to target state */
if (cx->mpu_state < PWRDM_POWER_ON) {
- if (neon_pwrst == PWRDM_POWER_ON) {
- if (cx->mpu_state == PWRDM_POWER_RET)
- pwrdm_set_next_pwrst(neon_pd, PWRDM_POWER_RET);
- else if (cx->mpu_state == PWRDM_POWER_OFF)
- pwrdm_set_next_pwrst(neon_pd, PWRDM_POWER_OFF);
- }
+ pwrdm_set_next_pwrst(neon_pd, cx->mpu_state);
pwrdm_set_next_pwrst(mpu_pd, cx->mpu_state);
}
/* Program CORE and PER to target state */
if (cx->core_state < PWRDM_POWER_ON) {
- if (per_pwrst == PWRDM_POWER_ON) {
- omap2_gpio_prepare_for_retention();
- if (clocks_off_while_idle) {
- omap3_save_per_ctx();
- per_gpio_clk_disable();
- omap_save_uart_ctx(2);
- omap_serial_enable_clocks(0, 2);
- }
+ omap2_gpio_prepare_for_retention();
+ if (clocks_off_while_idle) {
+ omap3_save_per_ctx();
+ per_gpio_clk_disable();
+ omap_save_uart_ctx(2);
+ omap_serial_enable_clocks(0, 2);
}
if (cx->core_state == PWRDM_POWER_OFF)
omap3_save_core_ctx();
+ /* Disable UART1/UART2 clocks here. Done using direct register
+ * writes as using clock f/w calls results in a hang in prcm_
+ * interrupt_handler trying to clear WKST for CORE
+ */
+ cm_clear_mod_reg_bits(0x6000, CORE_MOD, CM_ICLKEN1);
+ cm_clear_mod_reg_bits(0x6000, CORE_MOD, CM_FCLKEN1);
pwrdm_set_next_pwrst(core_pd, cx->core_state);
}
@@ -507,14 +502,9 @@ static int omap3_enter_idle(struct cpuid
*(scratchpad_restore_addr) = 0x0;
- /* Program MPU/NEON to ON */
- if (cx->mpu_state < PWRDM_POWER_ON) {
- if (neon_pwrst == PWRDM_POWER_ON)
- pwrdm_set_next_pwrst(neon_pd, PWRDM_POWER_ON);
- pwrdm_set_next_pwrst(mpu_pd, PWRDM_POWER_ON);
- }
-
if (cx->core_state < PWRDM_POWER_ON) {
+ cm_set_mod_reg_bits(0x6000, CORE_MOD, CM_ICLKEN1);
+ cm_set_mod_reg_bits(0x6000, CORE_MOD, CM_FCLKEN1);
if ((cx->core_state == PWRDM_POWER_OFF)
&& (pwrdm_read_prev_pwrst(core_pd) == PWRDM_POWER_OFF)) {
omap3_restore_core_ctx();
@@ -522,15 +512,13 @@ static int omap3_enter_idle(struct cpuid
omap3_restore_sram_ctx();
}
pwrdm_set_next_pwrst(core_pd, PWRDM_POWER_ON);
- if (per_pwrst == PWRDM_POWER_ON) {
- if (clocks_off_while_idle) {
- omap_serial_enable_clocks(1, 2);
- omap_restore_uart_ctx(2);
- per_gpio_clk_enable();
- omap3_restore_per_ctx();
- }
- omap2_gpio_resume_after_retention();
+ if (clocks_off_while_idle) {
+ omap_serial_enable_clocks(1, 2);
+ omap_restore_uart_ctx(2);
+ per_gpio_clk_enable();
+ omap3_restore_per_ctx();
}
+ omap2_gpio_resume_after_retention();
}
pr_debug("MPU prev st:%x,NEON prev st:%x\n",
@@ -548,7 +536,7 @@ return_sleep_time:
sched_clock_idle_wakeup_event(timespec_to_ns(&ts_idle));
local_irq_enable();
- local_fiq_disable();
+ local_fiq_enable();
return (u32)timespec_to_ns(&ts_idle)/1000;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
