2008/7/2 <[EMAIL PROTECTED]>:
> From: Iqbal Shareef <[EMAIL PROTECTED]>
>
> Separate out 3430 LCD panel support from 2430 SDP.
>
> Currently the support for the LCD on 3430SDP is added in the lcd_2430sdp.c
> file. This patch separates it out to a new file.
Isn't this a bit step backwards? Code reuse is generally a good thing
if it doesn't clutter the code too much, and if you do diff -pNaur
lcd_2430sdp.c lcd_3430sdp.c in the current tree you will see that they
are very similar.
Additionally this patch leaves some of the 3430SDP code in
lcd_2430sdp.c, you will still find this:
#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 24
#define SDP3430_LCD_PANEL_ENABLE_GPIO 28
...
if (machine_is_omap_3430sdp()) {
enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO;
backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO;
} else {
enable_gpio = SDP2430_LCD_PANEL_ENABLE_GPIO;
backlight_gpio = SDP2430_LCD_PANEL_BACKLIGHT_GPIO;
}
...
if (machine_is_omap_3430sdp()) {
ded_reg = TWL4030_VAUX3_DEDICATED;
ded_val = ENABLE_VAUX3_DEDICATED;
grp_reg = TWL4030_VAUX3_DEV_GRP;
grp_val = ENABLE_VAUX3_DEV_GRP;
} else {
ded_reg = TWL4030_VAUX2_DEDICATED;
ded_val = ENABLE_VAUX2_DEDICATED;
grp_reg = TWL4030_VAUX2_DEV_GRP;
grp_val = ENABLE_VAUX2_DEV_GRP;
}
Another thing that isn't explained is why the GPIO numbers for
backlight and enable changed from 24 and 28 to 8 and 5.
Regards,
Andrew
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
