Sometime back I came across such issue, please try if it works for you - Set your "bootargs" to some garbage value, the logs will get diverted automatically to LCD.
Ho I have tested is - >From u-boot prompt issue #setenv bootargs <copy complete boot argument again including "bootargs"> #boot Ideally you should see console diverted to LCD. Please note that you must set bootargs to some garbage value, else it will not get any logs. Thanks, Vaibhav Hiremath Senior Software Engg. Platform Support Products Texas Instruments Inc Ph: +91-80-25099927 TI IP Ph: 509-9927 http://dbdwss01.india.ti.com/pspproducts/ -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ashish Bijlani Sent: Wednesday, July 09, 2008 10:56 AM To: [email protected] Subject: initial frame buffer console Hi, I'm working with N810. I couldn't get serial port working and want to have initial kernel boot msgs on clcd over fbcon. Can somebody guide me how to have initial fbcon for kernel boot messages? I want to provide minimal frame buffer support may be using internal 640k sram. Thanks, Ashish -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
