The patch defines virtual nodes for VDD1 and VDD2
Signed-off-by: Rajendra Nayak <[EMAIL PROTECTED]>
---
arch/arm/mach-omap2/board-3430sdp.c | 38 +++++
arch/arm/mach-omap2/clock34xx.c | 206 +++++++++++++++++++++++++-----
arch/arm/mach-omap2/clock34xx.h | 29 ++++
include/asm-arm/arch-omap/board-3430sdp.h | 35 +++++
include/asm-arm/arch-omap/clock.h | 8 +
5 files changed, 287 insertions(+), 29 deletions(-)
Index: linux-omap-2.6/arch/arm/mach-omap2/clock34xx.h
===================================================================
--- linux-omap-2.6.orig/arch/arm/mach-omap2/clock34xx.h 2008-08-06
14:55:12.000000000 +0530
+++ linux-omap-2.6/arch/arm/mach-omap2/clock34xx.h 2008-08-07
15:07:19.000000000 +0530
@@ -36,6 +36,14 @@ static int omap3_noncore_dpll_enable(str
static void omap3_noncore_dpll_disable(struct clk *clk);
static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate);
static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
+static void omap3_table_recalc(struct clk *clk);
+static long omap3_round_to_table_rate(struct clk *clk, unsigned long rate);
+static int omap3_select_table_rate(struct clk *clk, unsigned long rate);
+
+extern struct vdd_prcm_config vdd1_rate_table[];
+extern struct vdd_prcm_config vdd2_rate_table[];
+extern struct vdd_prcm_config iva2_rate_table[];
+
/* Maximum DPLL multiplier, divider values for OMAP3 */
#define OMAP3_MAX_DPLL_MULT 2048
@@ -3064,6 +3072,24 @@ static struct clk wdt1_fck = {
.recalc = &followparent_recalc,
};
+static struct clk virt_vdd1_prcm_set = {
+ .name = "virt_vdd1_prcm_set",
+ .flags = CLOCK_IN_OMAP343X | VIRTUAL_CLOCK | ALWAYS_ENABLED,
+ .parent = &mpu_ck, /* Indexed by mpu speed, no parent */
+ .recalc = &omap3_table_recalc, /*sets are keyed on mpu rate */
+ .set_rate = &omap3_select_table_rate,
+ .round_rate = &omap3_round_to_table_rate,
+};
+
+static struct clk virt_vdd2_prcm_set = {
+ .name = "virt_vdd2_prcm_set",
+ .flags = CLOCK_IN_OMAP343X | VIRTUAL_CLOCK | ALWAYS_ENABLED,
+ .parent = &core_ck,
+ .recalc = &omap3_table_recalc,
+ .set_rate = &omap3_select_table_rate,
+ .round_rate = &omap3_round_to_table_rate,
+};
+
static struct clk *onchip_34xx_clks[] __initdata = {
&omap_32k_fck,
&virt_12m_ck,
@@ -3276,6 +3302,9 @@ static struct clk *onchip_34xx_clks[] __
&secure_32k_fck,
&gpt12_fck,
&wdt1_fck,
+ /* virtual group clock */
+ &virt_vdd1_prcm_set,
+ &virt_vdd2_prcm_set,
};
#endif
Index: linux-omap-2.6/arch/arm/mach-omap2/clock34xx.c
===================================================================
--- linux-omap-2.6.orig/arch/arm/mach-omap2/clock34xx.c 2008-08-07
14:34:23.000000000 +0530
+++ linux-omap-2.6/arch/arm/mach-omap2/clock34xx.c 2008-08-07
15:07:19.000000000 +0530
@@ -25,6 +25,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/limits.h>
+#include <linux/err.h>
#include <asm/arch/clock.h>
#include <asm/arch/sram.h>
@@ -45,6 +46,32 @@
#define MAX_DPLL_WAIT_TRIES 1000000
+struct vdd_prcm_config *curr_vdd1_prcm_set;
+struct vdd_prcm_config *curr_vdd2_prcm_set;
+static struct clk *dpll1_clk, *dpll2_clk, *dpll3_clk;
+
+#ifndef CONFIG_CPU_FREQ
+static unsigned long compute_lpj(unsigned long ref, u_int div, u_int mult)
+{
+ unsigned long new_jiffy_l, new_jiffy_h;
+
+ /*
+ * Recalculate loops_per_jiffy. We do it this way to
+ * avoid math overflow on 32-bit machines. Maybe we
+ * should make this architecture dependent? If you have
+ * a better way of doing this, please replace!
+ *
+ * new = old * mult / div
+ */
+ new_jiffy_h = ref / div;
+ new_jiffy_l = (ref % div) / 100;
+ new_jiffy_h *= mult;
+ new_jiffy_l = new_jiffy_l * mult / div;
+
+ return new_jiffy_h + new_jiffy_l * 100;
+}
+#endif
+
/**
* omap3_dpll_recalc - recalculate DPLL rate
* @clk: DPLL struct clk
@@ -644,15 +671,6 @@ void omap2_clk_prepare_for_reboot(void)
*/
static int __init omap2_clk_arch_init(void)
{
- if (!mpurate)
- return -EINVAL;
-
- /* REVISIT: not yet ready for 343x */
-#if 0
- if (omap2_select_table_rate(&virt_prcm_set, mpurate))
- printk(KERN_ERR "Could not find matching MPU rate\n");
-#endif
-
recalculate_root_clocks();
printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL3/MPU): "
@@ -670,6 +688,9 @@ int __init omap2_clk_init(void)
struct clk **clkp;
/* u32 clkrate; */
u32 cpu_clkflg;
+ unsigned long mpu_speed, core_speed;
+ struct vdd_prcm_config *prcm_vdd;
+
/* REVISIT: Ultimately this will be used for multiboot */
#if 0
@@ -712,22 +733,31 @@ int __init omap2_clk_init(void)
}
}
- /* REVISIT: Not yet ready for OMAP3 */
-#if 0
- /* Check the MPU rate set by bootloader */
- clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
- for (prcm = rate_table; prcm->mpu_speed; prcm++) {
- if (!(prcm->flags & cpu_mask))
- continue;
- if (prcm->xtal_speed != sys_ck.rate)
- continue;
- if (prcm->dpll_speed <= clkrate)
- break;
+ recalculate_root_clocks();
+
+ dpll1_clk = clk_get(NULL, "dpll1_ck");
+ dpll2_clk = clk_get(NULL, "dpll2_ck");
+ dpll3_clk = clk_get(NULL, "dpll3_ck");
+
+#ifdef CONFIG_MACH_OMAP_3430SDP
+ mpu_speed = dpll1_clk->rate;
+ prcm_vdd = vdd1_rate_table + MAX_VDD1_OPP;
+ for (; prcm_vdd->speed; prcm_vdd--) {
+ if (prcm_vdd->speed <= mpu_speed) {
+ curr_vdd1_prcm_set = prcm_vdd;
+ break;
+ }
}
- curr_prcm_set = prcm;
-#endif
- recalculate_root_clocks();
+ core_speed = dpll3_clk->rate;
+ prcm_vdd = vdd2_rate_table + MAX_VDD2_OPP;
+ for (; prcm_vdd->speed; prcm_vdd--) {
+ if (prcm_vdd->speed <= core_speed) {
+ curr_vdd2_prcm_set = prcm_vdd;
+ break;
+ }
+ }
+#endif
printk(KERN_INFO "Clocking rate (Crystal/DPLL/ARM core): "
"%ld.%01ld/%ld/%ld MHz\n",
@@ -740,13 +770,131 @@ int __init omap2_clk_init(void)
*/
clk_enable_init_clocks();
- /* Avoid sleeping during omap2_clk_prepare_for_reboot() */
- /* REVISIT: not yet ready for 343x */
-#if 0
- vclk = clk_get(NULL, "virt_prcm_set");
- sclk = clk_get(NULL, "sys_ck");
-#endif
return 0;
}
+inline unsigned int get_freq(struct vdd_prcm_config *opp_freq_table,
+ unsigned long opp)
+{
+ struct vdd_prcm_config *prcm_config;
+ prcm_config = opp_freq_table;
+
+ for (; prcm_config->opp; prcm_config--)
+ if (prcm_config->opp == opp)
+ return prcm_config->speed;
+ return 0;
+}
+
+inline unsigned int get_opp(struct vdd_prcm_config *opp_freq_table,
+ unsigned long freq)
+{
+ struct vdd_prcm_config *prcm_config;
+ prcm_config = opp_freq_table;
+
+ if (prcm_config->speed <= freq)
+ return prcm_config->opp; /* Return the Highest OPP */
+ for (; prcm_config->speed; prcm_config--) {
+ if (prcm_config->speed < freq)
+ return (prcm_config+1)->opp;
+ else if (prcm_config->speed == freq)
+ return prcm_config->opp;
+ }
+ /* Return the least OPP */
+ return (prcm_config+1)->opp;
+}
+
+#ifdef CONFIG_MACH_OMAP_3430SDP
+static void omap3_table_recalc(struct clk *clk)
+{
+ if ((clk != &virt_vdd1_prcm_set) && (clk != &virt_vdd2_prcm_set))
+ return;
+
+ if ((curr_vdd1_prcm_set) && (clk == &virt_vdd1_prcm_set))
+ clk->rate = curr_vdd1_prcm_set->speed;
+ else if ((curr_vdd2_prcm_set) && (clk == &virt_vdd2_prcm_set))
+ clk->rate = curr_vdd2_prcm_set->speed;
+ pr_debug("CLK RATE:%lu\n", clk->rate);
+}
+
+static long omap3_round_to_table_rate(struct clk *clk, unsigned long rate)
+{
+ struct vdd_prcm_config *ptr;
+ long highest_rate;
+
+ if ((clk != &virt_vdd1_prcm_set) && (clk != &virt_vdd2_prcm_set))
+ return -EINVAL;
+
+ highest_rate = -EINVAL;
+
+ if (clk == &virt_vdd1_prcm_set)
+ ptr = vdd1_rate_table + MAX_VDD1_OPP;
+ else
+ ptr = vdd2_rate_table + MAX_VDD2_OPP;
+
+ for (; ptr->speed; ptr--) {
+ highest_rate = ptr->speed;
+ pr_debug("Highest speed : %lu, rate: %lu\n", highest_rate,
+ rate);
+ if (ptr->speed <= rate)
+ break;
+ }
+ return highest_rate;
+}
+
+static int omap3_select_table_rate(struct clk *clk, unsigned long rate)
+{
+ struct vdd_prcm_config *prcm_vdd;
+ unsigned long found_speed = 0, curr_mpu_speed;
+ int index;
+
+ if ((clk != &virt_vdd1_prcm_set) && (clk != &virt_vdd2_prcm_set))
+ return -EINVAL;
+
+ if (clk == &virt_vdd1_prcm_set) {
+ prcm_vdd = vdd1_rate_table + MAX_VDD1_OPP;
+ index = MAX_VDD1_OPP;
+ } else if (clk == &virt_vdd2_prcm_set) {
+ prcm_vdd = vdd2_rate_table + MAX_VDD2_OPP;
+ index = MAX_VDD2_OPP;
+ }
+
+ for (; prcm_vdd->speed; prcm_vdd--, index--) {
+ if (prcm_vdd->speed <= rate) {
+ found_speed = prcm_vdd->speed;
+ pr_debug("Found speed = %lu\n", found_speed);
+ break;
+ }
+ }
+
+ if (!found_speed) {
+ printk(KERN_INFO "Could not set table rate to %luMHz\n",
+ rate / 1000000);
+ return -EINVAL;
+ }
+
+
+ if (clk == &virt_vdd1_prcm_set) {
+ curr_mpu_speed = curr_vdd1_prcm_set->speed;
+ clk_set_rate(dpll1_clk, prcm_vdd->speed);
+ clk_set_rate(dpll2_clk, iva2_rate_table[index].speed);
+ curr_vdd1_prcm_set = prcm_vdd;
+#ifndef CONFIG_CPU_FREQ
+ /*Update loops_per_jiffy if processor speed is being changed*/
+ loops_per_jiffy = compute_lpj(loops_per_jiffy,
+ curr_mpu_speed/1000, found_speed/1000);
#endif
+ } else {
+ clk_set_rate(dpll3_clk, prcm_vdd->speed);
+ curr_vdd2_prcm_set = prcm_vdd;
+ }
+ return 0;
+}
+#else /* CONFIG_MACH_OMAP_3430SDP */
+static void omap3_table_recalc(struct clk *clk) {}
+static long omap3_round_to_table_rate(struct clk *clk, unsigned long rate)
+{ return 0; }
+static int omap3_select_table_rate(struct clk *clk, unsigned long rate)
+{ return 0; }
+#endif /* CONFIG_MACH_OMAP_3430SDP */
+
+#endif /* CONFIG_ARCH_OMAP3 */
Index: linux-omap-2.6/include/asm-arm/arch-omap/clock.h
===================================================================
--- linux-omap-2.6.orig/include/asm-arm/arch-omap/clock.h 2008-08-07
14:34:23.000000000 +0530
+++ linux-omap-2.6/include/asm-arm/arch-omap/clock.h 2008-08-07
15:07:19.000000000 +0530
@@ -126,6 +126,14 @@ struct clk_functions {
#endif
};
+#ifdef CONFIG_ARCH_OMAP3
+struct vdd_prcm_config {
+ unsigned long speed;
+ unsigned long opp;
+ unsigned long flags;
+};
+#endif
+
extern unsigned int mpurate;
extern int clk_init(struct clk_functions *custom_clocks);
Index: linux-omap-2.6/arch/arm/mach-omap2/board-3430sdp.c
===================================================================
--- linux-omap-2.6.orig/arch/arm/mach-omap2/board-3430sdp.c 2008-08-06
14:55:12.000000000 +0530
+++ linux-omap-2.6/arch/arm/mach-omap2/board-3430sdp.c 2008-08-07
15:07:50.000000000 +0530
@@ -40,6 +40,7 @@
#include <asm/arch/keypad.h>
#include <asm/arch/dma.h>
#include <asm/arch/gpmc.h>
+#include <asm/arch/clock.h>
#include <linux/i2c/twl4030-rtc.h>
#include <asm/io.h>
@@ -53,6 +54,43 @@
#define ENABLE_VAUX3_DEDICATED 0x03
#define ENABLE_VAUX3_DEV_GRP 0x20
+struct vdd_prcm_config vdd1_rate_table[] = {
+ {0, 0, 0},
+ /*OPP1*/
+ {S125M, VDD1_OPP1, 0},
+ /*OPP2*/
+ {S250M, VDD1_OPP2, 0},
+ /*OPP3*/
+ {S500M, VDD1_OPP3, 0},
+ /*OPP4*/
+ {S550M, VDD1_OPP4, 0},
+ /*OPP5*/
+ {S600M, VDD1_OPP5, 0},
+};
+
+struct vdd_prcm_config vdd2_rate_table[] = {
+ {0, 0, 0},
+ /*OPP1*/
+ {0, VDD2_OPP1, 0},
+ /*OPP2*/
+ {S83M, VDD2_OPP2, 0},
+ /*OPP3*/
+ {S166M, VDD2_OPP3, 0},
+};
+
+struct vdd_prcm_config iva2_rate_table[] = {
+ {0, 0, 0},
+ /*OPP1*/
+ {S90M, VDD1_OPP1, 0},
+ /*OPP2*/
+ {S180M, VDD1_OPP2, 0},
+ /*OPP3*/
+ {S360M, VDD1_OPP3, 0},
+ /*OPP4*/
+ {S400M, VDD1_OPP4, 0},
+ /*OPP5*/
+ {S430M, VDD1_OPP5, 0},
+};
#define TWL4030_MSECURE_GPIO 22
Index: linux-omap-2.6/include/asm-arm/arch-omap/board-3430sdp.h
===================================================================
--- linux-omap-2.6.orig/include/asm-arm/arch-omap/board-3430sdp.h
2008-08-06
14:55:22.000000000 +0530
+++ linux-omap-2.6/include/asm-arm/arch-omap/board-3430sdp.h 2008-08-07
15:07:19.000000000 +0530
@@ -68,5 +68,40 @@ extern void twl4030_bci_battery_init(voi
#define FLASH_SIZE_SDPV1 SZ_64M
#define FLASH_SIZE_SDPV2 SZ_128M
+/* MPU speeds */
+#define S600M 600000000
+#define S550M 550000000
+#define S500M 500000000
+#define S250M 250000000
+#define S125M 125000000
+
+/* IVA speeds */
+#define S430M 430000000
+#define S400M 400000000
+#define S360M 360000000
+#define S180M 180000000
+#define S90M 90000000
+
+/* L3 speeds */
+#define S83M 83000000
+#define S166M 166000000
+
+/* VDD1 OPPS */
+#define VDD1_OPP1 0x1
+#define VDD1_OPP2 0x2
+#define VDD1_OPP3 0x3
+#define VDD1_OPP4 0x4
+#define VDD1_OPP5 0x5
+
+/* VDD2 OPPS */
+#define VDD2_OPP1 0x1
+#define VDD2_OPP2 0x2
+#define VDD2_OPP3 0x3
+
+#define MIN_VDD1_OPP VDD1_OPP1
+#define MAX_VDD1_OPP VDD1_OPP5
+#define MIN_VDD2_OPP VDD2_OPP1
+#define MAX_VDD2_OPP VDD2_OPP3
+
#endif /* __ASM_ARCH_OMAP_3430SDP_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
