From: David Brownell <[EMAIL PROTECTED]>
Clean up the Beagle NAND config a bit: use SZ_128K instead of
an arithmetic expression for the NAND block size. Set the
NAND_BUSWIDTH_16 flag. Make its init routine static.
(Unrelated: make omap3_beagle_i2c_init be part of beagle_init.
It shouldn't be called on non-beagle hardware; and beagle_init
already runs with other arch_initcall code.)
Signed-off-by: David Brownell <[EMAIL PROTECTED]>
---
arch/arm/mach-omap2/board-omap3beagle.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- beagle.orig/arch/arm/mach-omap2/board-omap3beagle.c 2008-08-27
21:19:12.000000000 -0700
+++ beagle/arch/arm/mach-omap2/board-omap3beagle.c 2008-08-27
21:21:18.000000000 -0700
@@ -50,24 +50,24 @@ static struct mtd_partition omap3beagle_
{
.name = "X-Loader",
.offset = 0,
- .size = 4*(64 * 2048),
+ .size = 4 * SZ_128K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
{
.name = "U-Boot",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
- .size = 15*(64 * 2048),
+ .size = 15 * SZ_128K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
{
.name = "U-Boot Env",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
- .size = 1*(64 * 2048),
+ .size = 1 * SZ_128K,
},
{
.name = "Kernel",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
- .size = 32*(64 * 2048),
+ .size = 32 * SZ_128K,
},
{
.name = "File System",
@@ -77,6 +77,7 @@ static struct mtd_partition omap3beagle_
};
static struct omap_nand_platform_data omap3beagle_nand_data = {
+ .options = NAND_BUSWIDTH_16,
.parts = omap3beagle_nand_partitions,
.nr_parts = ARRAY_SIZE(omap3beagle_nand_partitions),
.dma_channel = -1, /* disable DMA in OMAP NAND driver */
@@ -205,7 +206,7 @@ static struct platform_device *omap3_bea
&keys_gpio,
};
-void __init omap3beagle_flash_init(void)
+static void __init omap3beagle_flash_init(void)
{
u8 cs = 0;
u8 nandcs = GPMC_CS_NUM + 1;
@@ -245,6 +246,7 @@ void __init omap3beagle_flash_init(void)
static void __init omap3_beagle_init(void)
{
+ omap3_beagle_i2c_init();
platform_add_devices(omap3_beagle_devices,
ARRAY_SIZE(omap3_beagle_devices));
omap_board_config = omap3_beagle_config;
omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
@@ -255,8 +257,6 @@ static void __init omap3_beagle_init(voi
omap3beagle_flash_init();
}
-arch_initcall(omap3_beagle_i2c_init);
-
static void __init omap3_beagle_map_io(void)
{
omap2_set_globals_343x();
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
