Hello Tero, Jouni,
so is this basically a workaround patch?
a few comments:
On Wed, 27 Aug 2008, Tero Kristo wrote:
> From: ext Jouni Hogander <[EMAIL PROTECTED]>
>
> In omap3 gpios 2-6 are in per domain. Functional clocks for these
> should be disabled.
>
> GPIO modules in PER domain are not able to act as a wake up source if
> PER domain is in retention. PER domain sleep transition before MPU is
> prevented by leaving icks active. PER domain still enters retention
> together with MPU. When this happens IOPAD wake up mechanism is used
> for gpios.
>
> Signed-off-by: Jouni Hogander <[EMAIL PROTECTED]>
> ---
> arch/arm/mach-omap2/pm.c | 20 ++++++++------
> arch/arm/mach-omap2/pm.h | 2 +-
> arch/arm/mach-omap2/pm34xx.c | 56
> +++++++++++++++++++++++++++++++++++++++++-
> 3 files changed, 67 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
> index 4652136..1de5f14 100644
> --- a/arch/arm/mach-omap2/pm.c
> +++ b/arch/arm/mach-omap2/pm.c
> @@ -32,7 +32,7 @@
> #include "pm.h"
>
> unsigned short enable_dyn_sleep;
> -unsigned short clocks_off_while_idle;
> +unsigned short gpio_clocks_off_while_idle;
> atomic_t sleep_block = ATOMIC_INIT(0);
>
> static ssize_t idle_show(struct kobject *, struct kobj_attribute *, char *);
> @@ -42,16 +42,16 @@ static ssize_t idle_store(struct kobject *k, struct
> kobj_attribute *,
> static struct kobj_attribute sleep_while_idle_attr =
> __ATTR(sleep_while_idle, 0644, idle_show, idle_store);
>
> -static struct kobj_attribute clocks_off_while_idle_attr =
> - __ATTR(clocks_off_while_idle, 0644, idle_show, idle_store);
> +static struct kobj_attribute gpio_clocks_off_while_idle_attr =
> + __ATTR(gpio_clocks_off_while_idle, 0644, idle_show, idle_store);
>
> static ssize_t idle_show(struct kobject *kobj, struct kobj_attribute *attr,
> char *buf)
> {
> if (attr == &sleep_while_idle_attr)
> return sprintf(buf, "%hu\n", enable_dyn_sleep);
> - else if (attr == &clocks_off_while_idle_attr)
> - return sprintf(buf, "%hu\n", clocks_off_while_idle);
> + else if (attr == &gpio_clocks_off_while_idle_attr)
> + return sprintf(buf, "%hu\n", gpio_clocks_off_while_idle);
> else
> return -EINVAL;
> }
> @@ -69,8 +69,8 @@ static ssize_t idle_store(struct kobject *kobj, struct
> kobj_attribute *attr,
>
> if (attr == &sleep_while_idle_attr)
> enable_dyn_sleep = value;
> - else if (attr == &clocks_off_while_idle_attr)
> - clocks_off_while_idle = value;
> + else if (attr == &gpio_clocks_off_while_idle_attr)
> + gpio_clocks_off_while_idle = value;
> else
> return -EINVAL;
>
> @@ -106,10 +106,12 @@ static int __init omap_pm_init(void)
> /* disabled till drivers are fixed */
> enable_dyn_sleep = 0;
> error = sysfs_create_file(power_kobj, &sleep_while_idle_attr.attr);
> - if (error)
> + if (error) {
> printk(KERN_ERR "sysfs_create_file failed: %d\n", error);
> + return error;
> + }
> error = sysfs_create_file(power_kobj,
> - &clocks_off_while_idle_attr.attr);
> + &gpio_clocks_off_while_idle_attr.attr);
> if (error)
> printk(KERN_ERR "sysfs_create_file failed: %d\n", error);
>
> diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
> index 68c9278..d446ea4 100644
> --- a/arch/arm/mach-omap2/pm.h
> +++ b/arch/arm/mach-omap2/pm.h
> @@ -17,7 +17,7 @@ extern int omap2_pm_init(void);
> extern int omap3_pm_init(void);
>
> extern unsigned short enable_dyn_sleep;
> -extern unsigned short clocks_off_while_idle;
> +extern unsigned short gpio_clocks_off_while_idle;
> extern atomic_t sleep_block;
>
> extern void omap2_block_sleep(void);
> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
> index a16eb33..0baf359 100644
> --- a/arch/arm/mach-omap2/pm34xx.c
> +++ b/arch/arm/mach-omap2/pm34xx.c
> @@ -53,6 +53,43 @@ static void (*saved_idle)(void);
>
> static struct powerdomain *mpu_pwrdm;
>
> +/* Dynamic GPIO clock handling for sleep routines.
> + * omap_sram_idle() will call these functions and they will dynamically
> + * enable / disable GPIO clocks to allow sleep transitions. */
Please use CodingStyle format for multiple-line comments, e.g.,
/*
* Dynamic GPIO clock handling ...
* etc. etc. etc.
*/
This also applies to several other comments later in the file.
> +#define NUM_OF_PERGPIOS 5
> +static struct clk *gpio_fcks[NUM_OF_PERGPIOS];
> +
> +/* Enable GPIO clocks from sleep routines if allowed */
> +static void per_gpio_clk_enable(void)
> +{
> + int i;
> +
> + if (gpio_clocks_off_while_idle == 0)
> + return;
> + for (i = 1; i < NUM_OF_PERGPIOS + 1; i++)
> + clk_enable(gpio_fcks[i-1]);
Why not just:
for (i = 0; i < NUM_OF_PERGPIOS; i++)
clk_enable(gpio_fcks[i]);
?
> +}
> +
> +/* Disable GPIO clocks from sleep routines if allowed */
> +static void per_gpio_clk_disable(void)
> +{
> + int i;
> +
> + if (gpio_clocks_off_while_idle == 0)
> + return;
> + for (i = 1; i < NUM_OF_PERGPIOS + 1; i++)
> + clk_disable(gpio_fcks[i-1]);
same as above comment.
> +}
> +
> +/* XXX This is for gpio fclk hack. Will be removed as gpio driver
> + * handles fcks correctly */
> +static void gpio_fclk_mask(u32 *fclk)
> +{
> + if (gpio_clocks_off_while_idle == 0)
> + return;
> + *fclk &= ~(0x1f << 13);
> +}
> +
> /* PRCM Interrupt Handler for wakeups */
> static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
> {
> @@ -169,8 +206,14 @@ static void omap_sram_idle(void)
>
> omap2_gpio_prepare_for_retention();
>
> + /* Disable GPIO clocks if allowed */
> + per_gpio_clk_disable();
> +
> _omap_sram_idle(NULL, save_state);
>
> + /* Enable GPIO clocks if allowed */
> + per_gpio_clk_enable();
> +
> omap2_gpio_resume_after_retention();
> }
>
> @@ -203,6 +246,9 @@ static int omap3_fclks_active(void)
> CM_FCLKEN);
> fck_per = cm_read_mod_reg(OMAP3430_PER_MOD,
> CM_FCLKEN);
> +
> + gpio_fclk_mask(&fck_per);
> +
> if (fck_core1 | fck_core3 | fck_sgx | fck_dss |
> fck_cam | fck_per | fck_usbhost)
> return 1;
> @@ -544,7 +590,8 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm)
> int __init omap3_pm_init(void)
> {
> struct power_state *pwrst;
> - int ret;
> + char clk_name[11];
> + int ret, i;
>
> printk(KERN_ERR "Power Management for TI OMAP3.\n");
>
> @@ -580,6 +627,13 @@ int __init omap3_pm_init(void)
>
> pm_idle = omap3_pm_idle;
>
> + /* XXX This is for gpio fclk hack. Will be removed as gpio driver
> + * handles fcks correctly */
> + for (i = 1; i < NUM_OF_PERGPIOS + 1; i++) {
> + sprintf(clk_name, "gpio%d_fck", i + 1);
> + gpio_fcks[i-1] = clk_get(NULL, clk_name);
same comment as the for-loops above...
> + }
> +
> err1:
> return ret;
> err2:
> --
> 1.5.4.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
- Paul
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
