* vimal singh <[EMAIL PROTECTED]> [080826 03:42]:
> From: Teerth Reddy <[EMAIL PROTECTED]>
> 
> This patch adds NAND support on 3430sdp board
> 
> Signed-off-by: Teerth Reddy <[EMAIL PROTECTED]>
> ---
>  arch/arm/mach-omap2/board-3430sdp-flash.c |   88 
> ++++++++++++++++++++++++++++--
>  arch/arm/plat-omap/include/mach/gpmc.h    |   10 +++
>  2 files changed, 93 insertions(+), 5 deletions(-)
> 
> Index: linux-omap-2.6/arch/arm/mach-omap2/board-3430sdp-flash.c
> ===================================================================
> --- linux-omap-2.6.orig/arch/arm/mach-omap2/board-3430sdp-flash.c
> +++ linux-omap-2.6/arch/arm/mach-omap2/board-3430sdp-flash.c
> @@ -24,6 +24,7 @@
>  #include <mach/onenand.h>
>  #include <mach/board.h>
>  #include <mach/gpmc.h>
> +#include <mach/nand.h>
> 
>  static struct mtd_partition sdp_nor_partitions[] = {
>       /* bootloader (U-Boot, etc) in first sector */
> @@ -137,6 +138,61 @@ static int sdp_onenand_setup(void __iome
>       /* Onenand setup does nothing at present */
>       return 0;
>  }
> +
> +static struct mtd_partition sdp_nand_partitions[] = {
> +     /* All the partition sizes are listed in terms of NAND block size */
> +     {
> +             .name           = "X-Loader-NAND",
> +             .offset         = 0,
> +             .size           = 4 * (64 * 2048),
> +             .mask_flags     = MTD_WRITEABLE,        /* force read-only */
> +     },
> +     {
> +             .name           = "U-Boot-NAND",
> +             .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x80000 */
> +             .size           = 4 * (64 * 2048),
> +             .mask_flags     = MTD_WRITEABLE,        /* force read-only */
> +     },
> +     {
> +             .name           = "Boot Env-NAND",
> +             .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x100000 */
> +             .size           = 2 * (64 * 2048),
> +     },
> +     {
> +             .name           = "Kernel-NAND",
> +             .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x140000 */
> +             .size           = 32 * (64 * 2048),
> +     },
> +     {
> +             .name           = "File System - NAND",
> +             .size           = MTDPART_SIZ_FULL,
> +             .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x540000 */
> +     },
> +};
> +

Can you please update this to use the SZ_.. defines for .size as done
now for sdp_nor_partitions?

Thanks,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to