* Russell King - ARM Linux <[EMAIL PROTECTED]> [080911 11:13]:
> On Thu, Sep 11, 2008 at 10:33:33AM -0700, Tony Lindgren wrote:
> > * Russell King - ARM Linux <[EMAIL PROTECTED]> [080911 02:13]:
> > > New version of the MMC updates for mainline pushed out - with additional
> > > cleanups in place (and since it's a different patch, I've dropped Tony's
> > > ack from it.)
> >
> > While we're at it, let's clean up the mmc mess further and split the
> > resources to mach-omap1/devices.c and mach-omap2/devices.c. That way
> > we get rid of the ifdef else between omap1 and omap2.
>
> Great, it would be nice to get something in OMAP to the point where we
> can say it's finished, and doesn't have to be regularly tinkered with
> anymore.
OK, I've pushed a patch to l-o tree. Here's a patch for you against your
devel branch.
> Is there anything else that the MMC stuff is missing at present?
Well the omap_hsmmc.c driver is not quite ready yet. That should not
affect the device init code.
Tony
From: Tony Lindgren <[EMAIL PROTECTED]>
Date: Thu, 11 Sep 2008 17:42:37 -0700
Subject: [PATCH] ARM: OMAP: Clean-up MMC device init
Clean-up MMC device init:
- Initialize devices in mach-omap1/devices.c and mach-omap2/devices.c
instead of plat-omap/devices.c
- Remove old struct omap_mmc_config, use struct omap_mmc_platform_data instead
Signed-off-by: Tony Lindgren <[EMAIL PROTECTED]>
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index ab9ee58..37031e0 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -14,6 +14,7 @@
#include <mach/mmc.h>
#include <mach/gpio.h>
+#include <mach/mmc.h>
#ifdef CONFIG_MMC_OMAP
static int slot_cover_open;
@@ -83,6 +84,8 @@ static struct omap_mmc_platform_data h2_mmc_data = {
.init = h2_mmc_late_init,
.cleanup = h2_mmc_cleanup,
.slots[0] = {
+ .enabled = 1,
+ .wire4 = 1,
.set_power = h2_mmc_set_power,
.set_bus_mode = h2_mmc_set_bus_mode,
.get_ro = NULL,
@@ -95,7 +98,7 @@ static struct omap_mmc_platform_data h2_mmc_data = {
void __init h2_mmc_init(void)
{
- omap_set_mmc_info(1, &h2_mmc_data);
+ omap1_init_mmc(&h2_mmc_data);
}
#else
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 3b65914..3b59354 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -381,15 +381,6 @@ static struct omap_usb_config h2_usb_config __initdata = {
.pins[1] = 3,
};
-static struct omap_mmc_config h2_mmc_config __initdata = {
- .mmc[0] = {
- .enabled = 1,
- .wire4 = 1,
- },
-};
-
-extern struct omap_mmc_platform_data h2_mmc_data;
-
static struct omap_uart_config h2_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
@@ -400,7 +391,6 @@ static struct omap_lcd_config h2_lcd_config __initdata = {
static struct omap_board_config_kernel h2_config[] __initdata = {
{ OMAP_TAG_USB, &h2_usb_config },
- { OMAP_TAG_MMC, &h2_mmc_config },
{ OMAP_TAG_UART, &h2_uart_config },
{ OMAP_TAG_LCD, &h2_lcd_config },
};
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 3608581..44e9d53 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -14,6 +14,7 @@
#include <mach/mmc.h>
#include <mach/gpio.h>
+#include <mach/mmc.h>
#ifdef CONFIG_MMC_OMAP
static int slot_cover_open;
@@ -87,6 +88,8 @@ static struct omap_mmc_platform_data h3_mmc_data = {
.init = h3_mmc_late_init,
.cleanup = h3_mmc_cleanup,
.slots[0] = {
+ .enabled = 1,
+ .wire4 = 1,
.set_power = h3_mmc_set_power,
.set_bus_mode = h3_mmc_set_bus_mode,
.get_ro = NULL,
@@ -99,7 +102,7 @@ static struct omap_mmc_platform_data h3_mmc_data = {
void __init h3_mmc_init(void)
{
- omap_set_mmc_info(1, &h3_mmc_data);
+ omap1_init_mmc(&h3_mmc_data);
}
#else
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 2ced6d9..ff9bbe2 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -447,15 +447,6 @@ static struct omap_usb_config h3_usb_config __initdata = {
.pins[1] = 3,
};
-static struct omap_mmc_config h3_mmc_config __initdata = {
- .mmc[0] = {
- .enabled = 1,
- .wire4 = 1,
- },
-};
-
-extern struct omap_mmc_platform_data h3_mmc_data;
-
static struct omap_uart_config h3_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
@@ -466,7 +457,6 @@ static struct omap_lcd_config h3_lcd_config __initdata = {
static struct omap_board_config_kernel h3_config[] __initdata = {
{ OMAP_TAG_USB, &h3_usb_config },
- { OMAP_TAG_MMC, &h3_mmc_config },
{ OMAP_TAG_UART, &h3_uart_config },
{ OMAP_TAG_LCD, &h3_lcd_config },
};
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index cbc11be..9ed0fef 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -39,6 +39,7 @@
#include <mach/common.h>
#include <mach/mcbsp.h>
#include <mach/omap-alsa.h>
+#include <mach/mmc.h>
static int innovator_keymap[] = {
KEY(0, 0, KEY_F1),
@@ -360,13 +361,15 @@ static struct omap_lcd_config innovator1610_lcd_config __initdata = {
};
#endif
-static struct omap_mmc_config innovator_mmc_config __initdata = {
- .mmc [0] = {
- .enabled = 1,
- .wire4 = 1,
- .wp_pin = OMAP_MPUIO(3),
- .power_pin = -1, /* FPGA F3 UIO42 */
- .switch_pin = -1, /* FPGA F4 UIO43 */
+static struct omap_mmc_platform_data innovator_mmc_data = {
+ .nr_slots = 1,
+ .slots[0] = {
+ .enabled = 1,
+ .wire4 = 1,
+ .wp_pin = OMAP_MPUIO(3),
+ .power_pin = -1, /* FPGA F3 UIO42 */
+ .switch_pin = -1, /* FPGA F4 UIO43 */
+ .name = "mmcblk",
},
};
@@ -377,7 +380,6 @@ static struct omap_uart_config innovator_uart_config __initdata = {
static struct omap_board_config_kernel innovator_config[] = {
{ OMAP_TAG_USB, NULL },
{ OMAP_TAG_LCD, NULL },
- { OMAP_TAG_MMC, &innovator_mmc_config },
{ OMAP_TAG_UART, &innovator_uart_config },
};
@@ -412,6 +414,7 @@ static void __init innovator_init(void)
omap_board_config_size = ARRAY_SIZE(innovator_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
+ omap1_init_mmc(&innovator_mmc_data);
}
static void __init innovator_map_io(void)
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 38d9783..a8d2fef 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -35,6 +35,7 @@
#include <mach/aic23.h>
#include <mach/omapfb.h>
#include <mach/lcd_mipid.h>
+#include <mach/mmc.h>
#define ADS7846_PENDOWN_GPIO 15
@@ -173,26 +174,29 @@ static struct omap_usb_config nokia770_usb_config __initdata = {
.pins[0] = 6,
};
-static struct omap_mmc_config nokia770_mmc_config __initdata = {
- .mmc[0] = {
- .enabled = 0,
- .wire4 = 0,
- .wp_pin = -1,
- .power_pin = -1,
- .switch_pin = -1,
+static struct omap_mmc_platform_data nokia770_mmc_data = {
+ .nr_slots = 2,
+ .slots[0] = {
+ .enabled = 0,
+ .wire4 = 0,
+ .wp_pin = -1,
+ .power_pin = -1,
+ .switch_pin = -1,
+ .name = "mmcblk",
},
- .mmc[1] = {
- .enabled = 0,
- .wire4 = 0,
- .wp_pin = -1,
- .power_pin = -1,
- .switch_pin = -1,
+ .slots[1] = {
+ .enabled = 0,
+ .wire4 = 0,
+ .wp_pin = -1,
+ .power_pin = -1,
+ .switch_pin = -1,
+ .name = "mmcblk",
},
+
};
static struct omap_board_config_kernel nokia770_config[] __initdata = {
{ OMAP_TAG_USB, NULL },
- { OMAP_TAG_MMC, &nokia770_mmc_config },
};
#if defined(CONFIG_OMAP_DSP)
@@ -335,6 +339,7 @@ static void __init omap_nokia770_init(void)
omap_dsp_init();
ads7846_dev_init();
mipid_dev_init();
+ omap1_init_mmc(&nokia770_mmc_data);
}
static void __init omap_nokia770_map_io(void)
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index b580436..52fd4e3 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -44,6 +44,7 @@
#include <mach/common.h>
#include <mach/mcbsp.h>
#include <mach/omap-alsa.h>
+#include <mach/mmc.h>
static void __init omap_palmte_init_irq(void)
{
@@ -195,12 +196,14 @@ static struct omap_usb_config palmte_usb_config __initdata = {
.pins[0] = 2,
};
-static struct omap_mmc_config palmte_mmc_config __initdata = {
- .mmc[0] = {
- .enabled = 1,
- .wp_pin = PALMTE_MMC_WP_GPIO,
- .power_pin = PALMTE_MMC_POWER_GPIO,
- .switch_pin = PALMTE_MMC_SWITCH_GPIO,
+static struct omap_mmc_platform_data palmzte_mmc_data = {
+ .nr_slots = 1,
+ .slots[0] = {
+ .enabled = 1,
+ .wp_pin = PALMTE_MMC_WP_GPIO,
+ .power_pin = PALMTE_MMC_POWER_GPIO,
+ .switch_pin = PALMTE_MMC_SWITCH_GPIO,
+ .name = "mmcblk",
},
};
@@ -316,7 +319,6 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery)
static struct omap_board_config_kernel palmte_config[] __initdata = {
{ OMAP_TAG_USB, &palmte_usb_config },
- { OMAP_TAG_MMC, &palmte_mmc_config },
{ OMAP_TAG_LCD, &palmte_lcd_config },
{ OMAP_TAG_UART, &palmte_uart_config },
};
@@ -372,6 +374,7 @@ static void __init omap_palmte_init(void)
palmte_misc_gpio_setup();
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
+ omap1_init_mmc(&palmte_mmc_data);
}
static void __init omap_palmte_map_io(void)
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index e719294..5c75b9a 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -43,6 +43,7 @@
#include <mach/keypad.h>
#include <mach/common.h>
#include <mach/omap-alsa.h>
+#include <mach/mmc.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
@@ -267,13 +268,15 @@ static struct omap_usb_config palmz71_usb_config __initdata = {
.pins[0] = 2,
};
-static struct omap_mmc_config palmz71_mmc_config __initdata = {
- .mmc[0] = {
- .enabled = 1,
- .wire4 = 0,
- .wp_pin = PALMZ71_MMC_WP_GPIO,
- .power_pin = -1,
- .switch_pin = PALMZ71_MMC_IN_GPIO,
+static struct omap_mmc_platform_data palmz71_mmc_data = {
+ .nr_slots = 1,
+ .slots[0] = {
+ .enabled = 1,
+ .wire4 = 0,
+ .wp_pin = PALMZ71_MMC_WP_GPIO,
+ .power_pin = -1,
+ .switch_pin = PALMZ71_MMC_IN_GPIO,
+ .name = "mmcblk",
},
};
@@ -287,7 +290,6 @@ static struct omap_uart_config palmz71_uart_config __initdata = {
static struct omap_board_config_kernel palmz71_config[] __initdata = {
{OMAP_TAG_USB, &palmz71_usb_config},
- {OMAP_TAG_MMC, &palmz71_mmc_config},
{OMAP_TAG_LCD, &palmz71_lcd_config},
{OMAP_TAG_UART, &palmz71_uart_config},
};
@@ -365,6 +367,7 @@ omap_palmz71_init(void)
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
palmz71_gpio_setup(0);
+ omap1_init_mmc(&palmz71_mmc_data);
}
static void __init
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 0be4eba..524d22d 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -12,6 +12,8 @@
* published by the Free Software Foundation.
*/
+#include <linux/platform_device.h>
+
#include <mach/hardware.h>
#include <mach/mmc.h>
#include <mach/gpio.h>
@@ -97,6 +99,8 @@ static struct omap_mmc_platform_data sx1_mmc_data = {
.init = sx1_mmc_late_init,
.cleanup = sx1_mmc_cleanup,
.slots[0] = {
+ .enabled = 1,
+ .wire4 = 0,
.set_power = sx1_mmc_set_power,
.set_bus_mode = sx1_mmc_set_bus_mode,
.get_ro = NULL,
@@ -109,7 +113,7 @@ static struct omap_mmc_platform_data sx1_mmc_data = {
void __init sx1_mmc_init(void)
{
- omap_set_mmc_info(1, &sx1_mmc_data);
+ omap1_init_mmc(&sx1_mmc_data);
}
#else
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 130bcc6..f915839 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -378,15 +378,6 @@ static struct omap_usb_config sx1_usb_config __initdata = {
.pins[2] = 0,
};
-/*----------- MMC -------------------------*/
-
-static struct omap_mmc_config sx1_mmc_config __initdata = {
- .mmc [0] = {
- .enabled = 1,
- .wire4 = 0,
- },
-};
-
/*----------- LCD -------------------------*/
static struct platform_device sx1_lcd_device = {
@@ -414,7 +405,6 @@ static struct omap_uart_config sx1_uart_config __initdata = {
static struct omap_board_config_kernel sx1_config[] __initdata = {
{ OMAP_TAG_USB, &sx1_usb_config },
- { OMAP_TAG_MMC, &sx1_mmc_config },
{ OMAP_TAG_LCD, &sx1_lcd_config },
{ OMAP_TAG_UART, &sx1_uart_config },
};
@@ -443,7 +433,6 @@ static void __init omap_sx1_init(void)
omap_set_gpio_dataout(1, 1);/*A_IRDA_OFF = 1 */
omap_set_gpio_dataout(11, 0);/*A_SWITCH = 0 */
omap_set_gpio_dataout(15, 0);/*A_USB_ON = 0 */
-
}
/*----------------------------------------*/
static void __init omap_sx1_init_irq(void)
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 213b487..f5d8ba6 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -33,6 +33,7 @@
#include <mach/mux.h>
#include <mach/tc.h>
#include <mach/usb.h>
+#include <mach/mmc.h>
static struct plat_serial8250_port voiceblue_ports[] = {
{
@@ -139,11 +140,13 @@ static struct omap_usb_config voiceblue_usb_config __initdata = {
.pins[2] = 6,
};
-static struct omap_mmc_config voiceblue_mmc_config __initdata = {
- .mmc[0] = {
- .enabled = 1,
- .power_pin = 2,
- .switch_pin = -1,
+static struct omap_mmc_platform_data voiceblue_mmc_data = {
+ .nr_slots = 1,
+ .slots[0] = {
+ .enabled = 1,
+ .power_pin = 2,
+ .switch_pin = -1,
+ .name = "mmcblk",
},
};
@@ -153,7 +156,6 @@ static struct omap_uart_config voiceblue_uart_config __initdata = {
static struct omap_board_config_kernel voiceblue_config[] = {
{ OMAP_TAG_USB, &voiceblue_usb_config },
- { OMAP_TAG_MMC, &voiceblue_mmc_config },
{ OMAP_TAG_UART, &voiceblue_uart_config },
};
@@ -201,6 +203,8 @@ static void __init voiceblue_init(void)
* (it is connected through invertor) */
omap_writeb(0x00, OMAP_LPG1_LCR);
omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */
+
+ omap1_init_mmc(&voiceblue_mmc_data);
}
static void __init voiceblue_map_io(void)
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 99982d3..d9a1002 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -22,6 +22,7 @@
#include <mach/board.h>
#include <mach/mux.h>
#include <mach/gpio.h>
+#include <mach/mmc.h>
/*-------------------------------------------------------------------------*/
@@ -99,6 +100,136 @@ static inline void omap_init_mbox(void)
static inline void omap_init_mbox(void) { }
#endif
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+#define OMAP1_MMC1_BASE 0xfffb7800
+#define OMAP1_MMC1_END (OMAP1_MMC1_BASE + 0x7f)
+#define OMAP1_MMC1_INT INT_MMC
+
+#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */
+#define OMAP1_MMC2_END (OMAP1_MMC2_BASE + 0x7f)
+#define OMAP1_MMC2_INT INT_1610_MMC2
+
+static u64 omap1_mmc1_dmamask = 0xffffffff;
+
+static struct resource omap1_mmc1_resources[] = {
+ {
+ .start = OMAP1_MMC1_BASE,
+ .end = OMAP1_MMC1_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP1_MMC1_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device omap1_mmc1_device = {
+ .name = "mmci-omap",
+ .id = 1,
+ .dev = {
+ .dma_mask = &omap1_mmc1_dmamask,
+ },
+ .num_resources = ARRAY_SIZE(omap1_mmc1_resources),
+ .resource = omap1_mmc1_resources,
+};
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+
+static u64 omap1_mmc2_dmamask = 0xffffffff;
+
+static struct resource omap1_mmc2_resources[] = {
+ {
+ .start = OMAP1_MMC2_BASE,
+ .end = OMAP1_MMC2_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP1_MMC2_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device omap1_mmc2_device = {
+ .name = "mmci-omap",
+ .id = 2,
+ .dev = {
+ .dma_mask = &omap1_mmc2_dmamask,
+ },
+ .num_resources = ARRAY_SIZE(omap1_mmc2_resources),
+ .resource = omap1_mmc2_resources,
+};
+#define OMAP1_MMC2_DEVICE &omap1_mmc2_device
+#else
+#define OMAP1_MMC2_DEVICE &omap1_mmc1_device /* Dummy */
+#endif
+
+static inline void omap1_mmc_mux(struct omap_mmc_platform_data *info)
+{
+ if (info->slots[0].enabled) {
+ omap_cfg_reg(MMC_CMD);
+ omap_cfg_reg(MMC_CLK);
+ omap_cfg_reg(MMC_DAT0);
+ if (cpu_is_omap1710()) {
+ omap_cfg_reg(M15_1710_MMC_CLKI);
+ omap_cfg_reg(P19_1710_MMC_CMDDIR);
+ omap_cfg_reg(P20_1710_MMC_DATDIR0);
+ }
+ if (info->slots[0].wire4) {
+ omap_cfg_reg(MMC_DAT1);
+ /* NOTE: DAT2 can be on W10 (here) or M15 */
+ if (!info->slots[0].nomux)
+ omap_cfg_reg(MMC_DAT2);
+ omap_cfg_reg(MMC_DAT3);
+ }
+ }
+
+ /* Block 2 is on newer chips, and has many pinout options */
+ if (cpu_is_omap16xx() && info->slots[1].enabled) {
+ if (!info->slots[1].nomux) {
+ omap_cfg_reg(Y8_1610_MMC2_CMD);
+ omap_cfg_reg(Y10_1610_MMC2_CLK);
+ omap_cfg_reg(R18_1610_MMC2_CLKIN);
+ omap_cfg_reg(W8_1610_MMC2_DAT0);
+ if (info->slots[1].wire4) {
+ omap_cfg_reg(V8_1610_MMC2_DAT1);
+ omap_cfg_reg(W15_1610_MMC2_DAT2);
+ omap_cfg_reg(R10_1610_MMC2_DAT3);
+ }
+
+ /* These are needed for the level shifter */
+ omap_cfg_reg(V9_1610_MMC2_CMDDIR);
+ omap_cfg_reg(V5_1610_MMC2_DATDIR0);
+ omap_cfg_reg(W19_1610_MMC2_DATDIR1);
+ }
+
+ /* Feedback clock must be set on OMAP-1710 MMC2 */
+ if (cpu_is_omap1710())
+ omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
+ MOD_CONF_CTRL_1);
+ }
+}
+
+void omap1_init_mmc(struct omap_mmc_platform_data *info)
+{
+ if (!info)
+ return;
+
+ omap1_mmc_mux(info);
+ platform_set_drvdata(&omap1_mmc1_device, info);
+
+ if (cpu_is_omap16xx())
+ platform_set_drvdata(OMAP1_MMC2_DEVICE, info);
+
+ omap_init_mmc(info, &omap1_mmc1_device, OMAP1_MMC2_DEVICE);
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
#if defined(CONFIG_OMAP_STI)
#define OMAP1_STI_BASE IO_ADDRESS(0xfffea000)
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 989ad15..eec2fea 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -261,16 +261,6 @@ static struct omap_uart_config apollon_uart_config __initdata = {
.enabled_uarts = (1 << 0) | (0 << 1) | (0 << 2),
};
-static struct omap_mmc_config apollon_mmc_config __initdata = {
- .mmc [0] = {
- .enabled = 1,
- .wire4 = 1,
- .wp_pin = -1,
- .power_pin = -1,
- .switch_pin = -1,
- },
-};
-
static struct omap_usb_config apollon_usb_config __initdata = {
.register_dev = 1,
.hmc_mode = 0x14, /* 0:dev 1:host1 2:disable */
@@ -284,7 +274,6 @@ static struct omap_lcd_config apollon_lcd_config __initdata = {
static struct omap_board_config_kernel apollon_config[] = {
{ OMAP_TAG_UART, &apollon_uart_config },
- { OMAP_TAG_MMC, &apollon_mmc_config },
{ OMAP_TAG_USB, &apollon_usb_config },
{ OMAP_TAG_LCD, &apollon_lcd_config },
};
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 9ba0978..3b34c20 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -41,19 +41,8 @@ static struct omap_uart_config generic_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
-static struct omap_mmc_config generic_mmc_config __initdata = {
- .mmc [0] = {
- .enabled = 0,
- .wire4 = 0,
- .wp_pin = -1,
- .power_pin = -1,
- .switch_pin = -1,
- },
-};
-
static struct omap_board_config_kernel generic_config[] = {
{ OMAP_TAG_UART, &generic_uart_config },
- { OMAP_TAG_MMC, &generic_mmc_config },
};
static void __init omap_generic_init(void)
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index d4e3b6f..9f01681 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -371,23 +371,12 @@ static struct omap_uart_config h4_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
-static struct omap_mmc_config h4_mmc_config __initdata = {
- .mmc [0] = {
- .enabled = 1,
- .wire4 = 1,
- .wp_pin = -1,
- .power_pin = -1,
- .switch_pin = -1,
- },
-};
-
static struct omap_lcd_config h4_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel h4_config[] = {
{ OMAP_TAG_UART, &h4_uart_config },
- { OMAP_TAG_MMC, &h4_mmc_config },
{ OMAP_TAG_LCD, &h4_lcd_config },
};
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 2ee954a..79a026e 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -19,10 +19,12 @@
#include <asm/mach-types.h>
#include <asm/mach/map.h>
+#include <mach/control.h>
#include <mach/tc.h>
#include <mach/board.h>
#include <mach/mux.h>
#include <mach/gpio.h>
+#include <mach/mmc.h>
#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
@@ -203,6 +205,113 @@ static inline void omap_init_mcspi(void) {}
/*-------------------------------------------------------------------------*/
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
+ defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+
+#define OMAP2_MMC1_BASE 0x4809c000
+#define OMAP2_MMC1_END (OMAP2_MMC1_BASE + 0x1fc)
+#define OMAP2_MMC1_INT INT_24XX_MMC_IRQ
+
+#define OMAP2_MMC2_BASE 0x480b4000
+#define OMAP2_MMC2_END (OMAP2_MMC2_BASE + 0x1fc)
+#define OMAP2_MMC2_INT INT_24XX_MMC2_IRQ
+
+static u64 omap2_mmc1_dmamask = 0xffffffff;
+
+static struct resource omap2_mmc1_resources[] = {
+ {
+ .start = OMAP2_MMC1_BASE,
+ .end = OMAP2_MMC1_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP2_MMC1_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device omap2_mmc1_device = {
+ .name = "mmci-omap",
+ .id = 1,
+ .dev = {
+ .dma_mask = &omap2_mmc1_dmamask,
+ },
+ .num_resources = ARRAY_SIZE(omap2_mmc1_resources),
+ .resource = omap2_mmc1_resources,
+};
+
+static u64 omap2_mmc2_dmamask = 0xffffffff;
+
+static struct resource omap2_mmc2_resources[] = {
+ {
+ .start = OMAP2_MMC2_BASE,
+ .end = OMAP2_MMC2_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP2_MMC2_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device omap2_mmc2_device = {
+ .name = "mmci-omap",
+ .id = 2,
+ .dev = {
+ .dma_mask = &omap2_mmc2_dmamask,
+ },
+ .num_resources = ARRAY_SIZE(omap2_mmc2_resources),
+ .resource = omap2_mmc2_resources,
+};
+
+static inline void omap2_mmc_mux(struct omap_mmc_platform_data *info)
+{
+ if (!cpu_is_omap2420())
+ return;
+
+ if (info->slots[0].enabled) {
+ omap_cfg_reg(H18_24XX_MMC_CMD);
+ omap_cfg_reg(H15_24XX_MMC_CLKI);
+ omap_cfg_reg(G19_24XX_MMC_CLKO);
+ omap_cfg_reg(F20_24XX_MMC_DAT0);
+ omap_cfg_reg(F19_24XX_MMC_DAT_DIR0);
+ omap_cfg_reg(G18_24XX_MMC_CMD_DIR);
+ if (info->slots[0].wire4) {
+ omap_cfg_reg(H14_24XX_MMC_DAT1);
+ omap_cfg_reg(E19_24XX_MMC_DAT2);
+ omap_cfg_reg(D19_24XX_MMC_DAT3);
+ omap_cfg_reg(E20_24XX_MMC_DAT_DIR1);
+ omap_cfg_reg(F18_24XX_MMC_DAT_DIR2);
+ omap_cfg_reg(E18_24XX_MMC_DAT_DIR3);
+ }
+
+ /*
+ * Use internal loop-back in MMC/SDIO Module Input Clock
+ * selection
+ */
+ if (info->slots[0].internal_clock) {
+ u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+ v |= (1 << 24);
+ omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
+ }
+ }
+}
+
+void omap2_init_mmc(struct omap_mmc_platform_data *info)
+{
+ if (!info)
+ return;
+
+ omap2_mmc_mux(info);
+ omap2_mmc1_device.dev.platform_data = info;
+ omap2_mmc2_device.dev.platform_data = info;
+ omap_init_mmc(info, &omap2_mmc1_device, &omap2_mmc2_device);
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
static int __init omap2_init_devices(void)
{
/* please keep these calls, and their implementations above,
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index b38410f..db63c24 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -198,212 +198,22 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
-#define OMAP_MMC1_BASE 0x4809c000
-#define OMAP_MMC1_END (OMAP_MMC1_BASE + 0x1fc)
-#define OMAP_MMC1_INT INT_24XX_MMC_IRQ
-
-#define OMAP_MMC2_BASE 0x480b4000
-#define OMAP_MMC2_END (OMAP_MMC2_BASE + 0x1fc)
-#define OMAP_MMC2_INT INT_24XX_MMC2_IRQ
-
-#else
-
-#define OMAP_MMC1_BASE 0xfffb7800
-#define OMAP_MMC1_END (OMAP_MMC1_BASE + 0x7f)
-#define OMAP_MMC1_INT INT_MMC
-
-#define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */
-#define OMAP_MMC2_END (OMAP_MMC2_BASE + 0x7f)
-#define OMAP_MMC2_INT INT_1610_MMC2
-
-#endif
-
-static struct omap_mmc_platform_data mmc1_data;
-
-static u64 mmc1_dmamask = 0xffffffff;
-
-static struct resource mmc1_resources[] = {
- {
- .start = OMAP_MMC1_BASE,
- .end = OMAP_MMC1_END,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = OMAP_MMC1_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device mmc_omap_device1 = {
- .name = "mmci-omap",
- .id = 1,
- .dev = {
- .dma_mask = &mmc1_dmamask,
- .platform_data = &mmc1_data,
- },
- .num_resources = ARRAY_SIZE(mmc1_resources),
- .resource = mmc1_resources,
-};
-
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
- defined(CONFIG_ARCH_OMAP34XX)
-
-static struct omap_mmc_platform_data mmc2_data;
-
-static u64 mmc2_dmamask = 0xffffffff;
-
-static struct resource mmc2_resources[] = {
- {
- .start = OMAP_MMC2_BASE,
- .end = OMAP_MMC2_END,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = OMAP_MMC2_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device mmc_omap_device2 = {
- .name = "mmci-omap",
- .id = 2,
- .dev = {
- .dma_mask = &mmc2_dmamask,
- .platform_data = &mmc2_data,
- },
- .num_resources = ARRAY_SIZE(mmc2_resources),
- .resource = mmc2_resources,
-};
-#endif
-
-static inline void omap_init_mmc_conf(const struct omap_mmc_config *mmc_conf)
-{
- if (cpu_is_omap2430() || cpu_is_omap34xx())
- return;
-
- if (mmc_conf->mmc[0].enabled) {
- if (cpu_is_omap24xx()) {
- omap_cfg_reg(H18_24XX_MMC_CMD);
- omap_cfg_reg(H15_24XX_MMC_CLKI);
- omap_cfg_reg(G19_24XX_MMC_CLKO);
- omap_cfg_reg(F20_24XX_MMC_DAT0);
- omap_cfg_reg(F19_24XX_MMC_DAT_DIR0);
- omap_cfg_reg(G18_24XX_MMC_CMD_DIR);
- } else {
- omap_cfg_reg(MMC_CMD);
- omap_cfg_reg(MMC_CLK);
- omap_cfg_reg(MMC_DAT0);
- if (cpu_is_omap1710()) {
- omap_cfg_reg(M15_1710_MMC_CLKI);
- omap_cfg_reg(P19_1710_MMC_CMDDIR);
- omap_cfg_reg(P20_1710_MMC_DATDIR0);
- }
- }
- if (mmc_conf->mmc[0].wire4) {
- if (cpu_is_omap24xx()) {
- omap_cfg_reg(H14_24XX_MMC_DAT1);
- omap_cfg_reg(E19_24XX_MMC_DAT2);
- omap_cfg_reg(D19_24XX_MMC_DAT3);
- omap_cfg_reg(E20_24XX_MMC_DAT_DIR1);
- omap_cfg_reg(F18_24XX_MMC_DAT_DIR2);
- omap_cfg_reg(E18_24XX_MMC_DAT_DIR3);
- } else {
- omap_cfg_reg(MMC_DAT1);
- /* NOTE: DAT2 can be on W10 (here) or M15 */
- if (!mmc_conf->mmc[0].nomux)
- omap_cfg_reg(MMC_DAT2);
- omap_cfg_reg(MMC_DAT3);
- }
- }
-#if defined(CONFIG_ARCH_OMAP2420)
- if (mmc_conf->mmc[0].internal_clock) {
- /*
- * Use internal loop-back in MMC/SDIO
- * Module Input Clock selection
- */
- if (cpu_is_omap24xx()) {
- u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
- v |= (1 << 24); /* not used in 243x */
- omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
- }
- }
-#endif
- }
-
-#ifdef CONFIG_ARCH_OMAP16XX
- /* block 2 is on newer chips, and has many pinout options */
- if (mmc_conf->mmc[1].enabled) {
- if (!mmc_conf->mmc[1].nomux) {
- omap_cfg_reg(Y8_1610_MMC2_CMD);
- omap_cfg_reg(Y10_1610_MMC2_CLK);
- omap_cfg_reg(R18_1610_MMC2_CLKIN);
- omap_cfg_reg(W8_1610_MMC2_DAT0);
- if (mmc_conf->mmc[1].wire4) {
- omap_cfg_reg(V8_1610_MMC2_DAT1);
- omap_cfg_reg(W15_1610_MMC2_DAT2);
- omap_cfg_reg(R10_1610_MMC2_DAT3);
- }
-
- /* These are needed for the level shifter */
- omap_cfg_reg(V9_1610_MMC2_CMDDIR);
- omap_cfg_reg(V5_1610_MMC2_DATDIR0);
- omap_cfg_reg(W19_1610_MMC2_DATDIR1);
- }
-
- /* Feedback clock must be set on OMAP-1710 MMC2 */
- if (cpu_is_omap1710())
- omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
- MOD_CONF_CTRL_1);
- }
-#endif
-}
-
-static void __init omap_init_mmc(void)
+/*
+ * Register MMC devices. Called from mach-omap1 and mach-omap2 device init.
+ */
+void omap_init_mmc(struct omap_mmc_platform_data *info,
+ struct platform_device *pdev1, struct platform_device *pdev2)
{
- const struct omap_mmc_config *mmc_conf;
-
- /* NOTE: assumes MMC was never (wrongly) enabled */
- mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
- if (!mmc_conf)
+ if (!info)
return;
- omap_init_mmc_conf(mmc_conf);
-
- if (mmc_conf->mmc[0].enabled) {
- mmc1_data.conf = mmc_conf->mmc[0];
- (void) platform_device_register(&mmc_omap_device1);
- }
-
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
- defined(CONFIG_ARCH_OMAP34XX)
- if (mmc_conf->mmc[1].enabled) {
- mmc2_data.conf = mmc_conf->mmc[1];
- (void) platform_device_register(&mmc_omap_device2);
- }
-#endif
-}
+ if (info->slots[0].enabled && pdev1)
+ (void) platform_device_register(pdev1);
-void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info)
-{
- switch (host) {
- case 1:
- mmc1_data = *info;
- break;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
- defined(CONFIG_ARCH_OMAP34XX)
- case 2:
- mmc2_data = *info;
- break;
-#endif
- default:
- BUG();
- }
+ if (info->slots[1].enabled && pdev2)
+ (void) platform_device_register(pdev2);
}
-#else
-static inline void omap_init_mmc(void) {}
-void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info) {}
#endif
/*-------------------------------------------------------------------------*/
@@ -547,7 +357,6 @@ static int __init omap_init_devices(void)
*/
omap_init_dsp();
omap_init_kp();
- omap_init_mmc();
omap_init_uwire();
omap_init_wdt();
omap_init_rng();
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
index 5444564..9466772 100644
--- a/arch/arm/plat-omap/include/mach/board.h
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -16,7 +16,6 @@
/* Different peripheral ids */
#define OMAP_TAG_CLOCK 0x4f01
-#define OMAP_TAG_MMC 0x4f02
#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
#define OMAP_TAG_USB 0x4f04
#define OMAP_TAG_LCD 0x4f05
@@ -35,25 +34,6 @@ struct omap_clock_config {
u8 system_clock_type;
};
-struct omap_mmc_conf {
- unsigned enabled:1;
- /* nomux means "standard" muxing is wrong on this board, and that
- * board-specific code handled it before common init logic.
- */
- unsigned nomux:1;
- /* switch pin can be for card detect (default) or card cover */
- unsigned cover:1;
- /* 4 wire signaling is optional, and is only used for SD/SDIO */
- unsigned wire4:1;
- s16 power_pin;
- s16 switch_pin;
- s16 wp_pin;
-};
-
-struct omap_mmc_config {
- struct omap_mmc_conf mmc[2];
-};
-
struct omap_serial_console_config {
u8 console_uart;
u32 console_speed;
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index 62aa7df..57414c4 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -279,6 +279,7 @@
#define INT_24XX_USB_IRQ_HSOF 79
#define INT_24XX_USB_IRQ_OTG 80
#define INT_24XX_MMC_IRQ 83
+#define INT_24XX_MMC2_IRQ 86
#define INT_34XX_BENCH_MPU_EMUL 3
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
index fc15d13..af391e6 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -20,7 +20,6 @@
#define OMAP_MMC_MAX_SLOTS 2
struct omap_mmc_platform_data {
- struct omap_mmc_conf conf;
/* number of slots on board */
unsigned nr_slots:2;
@@ -42,6 +41,27 @@ struct omap_mmc_platform_data {
int (*resume)(struct device *dev, int slot);
struct omap_mmc_slot_data {
+
+ unsigned enabled:1;
+
+ /*
+ * nomux means "standard" muxing is wrong on this board, and
+ * that board-specific code handled it before common init logic.
+ */
+ unsigned nomux:1;
+
+ /* switch pin can be for card detect (default) or card cover */
+ unsigned cover:1;
+
+ /* 4 wire signaling is optional, and is only used for SD/SDIO */
+ unsigned wire4:1;
+
+ /* use the internal clock */
+ unsigned internal_clock:1;
+ s16 power_pin;
+ s16 switch_pin;
+ s16 wp_pin;
+
int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
int (* set_power)(struct device *dev, int slot, int power_on, int vdd);
int (* get_ro)(struct device *dev, int slot);
@@ -66,9 +86,30 @@ struct omap_mmc_platform_data {
} slots[OMAP_MMC_MAX_SLOTS];
};
-extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info);
-
/* called from board-specific card detection service routine */
extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed);
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
+ defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+void omap1_init_mmc(struct omap_mmc_platform_data *info);
+void omap2_init_mmc(struct omap_mmc_platform_data *info);
+void omap_init_mmc(struct omap_mmc_platform_data *info,
+ struct platform_device *pdev1, struct platform_device *pdev2);
+#else
+static inline void omap1_init_mmc(struct omap_mmc_platform_data *info)
+{
+}
+static inline void omap2_init_mmc(struct omap_mmc_platform_data *info)
+{
+}
+static inline void omap_init_mmc(struct omap_mmc_platform_data *info,
+ struct platform_device *pdev1, struct platform_device *pdev2)
+{
+}
+#endif
+
+#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+void __init hsmmc_init(void);
+#endif
+
#endif
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 1b9fc3c..6088294 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1317,7 +1317,7 @@ static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id)
host->slots[id] = slot;
mmc->caps = 0;
- if (host->pdata->conf.wire4)
+ if (host->pdata->slots[id].wire4)
mmc->caps |= MMC_CAP_4_BIT_DATA;
mmc->ops = &mmc_omap_ops;
