"Madhusudhan Chikkature" <[EMAIL PROTECTED]> writes: >> This ensures that each HSMMC block is reset so it will not interfere >> with retention or OFF-mode. >> >> Signed-off-by: Kevin Hilman <[EMAIL PROTECTED]>
[...] > This might not be the right place to reset the controllers. You can > avoid all the clk stuff if you do the reset in the driver probe > function after the clocks are enabled. The point is that this needs to be done even when the MMC driver is NOT built into the kernel, or in the case of a module, before the MMC driver is loaded. > BTW, What is the issue you are facing if you dont reset the > controllers? See mail from Jouni where he described it well. > I have seen that on L-o that suspend/resume works with this driver > enabled. Without this patch, suspend/resume may work, but you may not hit retention or OFF. As Jouni also described, some boards work without this patch, and others do not. Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
