Felipe Balbi <[EMAIL PROTECTED]> writes:
> On Wed, Sep 17, 2008 at 03:23:49PM +0200, ext Koen Kooi wrote:
>>
>> Op 17 sep 2008, om 14:24 heeft Steve Sakoman het volgende geschreven:
>>
>>> On Wed, Sep 17, 2008 at 12:16 AM, Koen Kooi <[EMAIL PROTECTED]>
>>> wrote:
>>>
>>>> And they aren't working too well with current l-o git either with MUSB
>>>> being
>>>> broken. There's a patch to fix client mode, but host mode still isn't
>>>> working.
>>>
>>> Host mode musb is working just fine on Overo with the "set
>>> transceiver" patch. Not sure why you are having trouble with Beagle
>>> (and can't check since I don't have my Beagle board with me at the
>>> moment)
>>
>> I should clarify: OTG mode with a host cable doesn't work in .27rc, it does
>> work in 2.6.26. I haven't tried specifying pure hostmode, only OTG.
>> I would try it on the evm as well, but that is having serious irq issues
>> with .27rc, pressing a key on the keypad triggers an irq overrun, ethernet
>> gives an oops on boot when trying to register and irq etc,etc. 2.6.27 is
>> looking really, really bad on omap3 at the moment.
>
> Yeah, we lost some musb history when it went to mainline. I didn't test
> this patch yet cuz I've been quite busy at work, but it should make
> beagle work. Could you tell me if makes it work ?
>
> diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
> index 9d2dcb1..f7fe91e 100644
> --- a/drivers/usb/musb/omap2430.c
> +++ b/drivers/usb/musb/omap2430.c
> @@ -215,12 +215,14 @@ void musb_platform_set_mode(struct musb *musb, u8
> musb_mode)
>
> int __init musb_platform_init(struct musb *musb)
> {
> + struct otg_transceiver *xceiv = otg_get_transceiver();
> u32 l;
>
> #if defined(CONFIG_ARCH_OMAP2430)
> omap_cfg_reg(AE5_2430_USB0HS_STP);
> #endif
>
> + memcpy(musb->xceiv, xceiv, sizeof(*xceiv));
Does this even compile? It doesn't match my patch, which is simply a
diff between the original l-o tree and what went upstream, and there
that last line looks like this:
+ musb->xceiv = *xceiv;
--
Måns Rullgård
[EMAIL PROTECTED]
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
