* David Brownell <[EMAIL PROTECTED]> [080925 05:36]:
> From: David Brownell <[EMAIL PROTECTED]>
>
> This updates most of the OMAP drivers which are in mainline to
> switch to using the cross-platform GPIO calls instead of the
> older OMAP-specific ones.
>
> This is all fairly brainless/obvious stuff. Probably the
> most interesting bit is to observe that the omap-keypad
> code seems to now have a portable core that could work with
> non-OMAP matrix keypads. (That would improve with hardware
> IRQ debouncing enabled, of course...)
Do you want push this to mainline as part of gpiolib patches?
Will apply to l-o tree.
Tony
>
> Signed-off-by: David Brownell <[EMAIL PROTECTED]>
> ---
> By "most", I mean it omits three drivers I know have patches
> pending for the initial 2.6.28 merge window. This should
> apply as-is to both mainline and the OMAP tree ... so if
> it passes muster to the OMAP team it's ready for upstream.
>
> Other than those drivers, most of the relevant changes are
> for board support files.
>
> drivers/input/keyboard/omap-keypad.c | 27 ++++-----
> drivers/mtd/nand/ams-delta.c | 4 -
> drivers/video/omap/lcd_inn1610.c | 22 +++----
> drivers/video/omap/lcd_osk.c | 10 +--
> drivers/video/omap/lcd_sx1.c | 97 +++++++++++++++------------------
> 5 files changed, 74 insertions(+), 86 deletions(-)
>
> --- a/drivers/input/keyboard/omap-keypad.c
> +++ b/drivers/input/keyboard/omap-keypad.c
> @@ -72,12 +72,9 @@ static unsigned int *col_gpios;
> static void set_col_gpio_val(struct omap_kp *omap_kp, u8 value)
> {
> int col;
> - for (col = 0; col < omap_kp->cols; col++) {
> - if (value & (1 << col))
> - omap_set_gpio_dataout(col_gpios[col], 1);
> - else
> - omap_set_gpio_dataout(col_gpios[col], 0);
> - }
> +
> + for (col = 0; col < omap_kp->cols; col++)
> + gpio_set_value(col_gpios[col], value & (1 << col));
> }
>
> static u8 get_row_gpio_val(struct omap_kp *omap_kp)
> @@ -86,7 +83,7 @@ static u8 get_row_gpio_val(struct omap_k
> u8 value = 0;
>
> for (row = 0; row < omap_kp->rows; row++) {
> - if (omap_get_gpio_datain(row_gpios[row]))
> + if (gpio_get_value(row_gpios[row]))
> value |= (1 << row);
> }
> return value;
> @@ -333,23 +330,23 @@ static int __init omap_kp_probe(struct p
> if (cpu_is_omap24xx()) {
> /* Cols: outputs */
> for (col_idx = 0; col_idx < omap_kp->cols; col_idx++) {
> - if (omap_request_gpio(col_gpios[col_idx]) < 0) {
> + if (gpio_request(col_gpios[col_idx], "omap_kp_col") <
> 0) {
> printk(KERN_ERR "Failed to request"
> "GPIO%d for keypad\n",
> col_gpios[col_idx]);
> goto err1;
> }
> - omap_set_gpio_direction(col_gpios[col_idx], 0);
> + gpio_direction_output(col_gpios[col_idx], 0);
> }
> /* Rows: inputs */
> for (row_idx = 0; row_idx < omap_kp->rows; row_idx++) {
> - if (omap_request_gpio(row_gpios[row_idx]) < 0) {
> + if (gpio_request(row_gpios[row_idx], "omap_kp_row") <
> 0) {
> printk(KERN_ERR "Failed to request"
> "GPIO%d for keypad\n",
> row_gpios[row_idx]);
> goto err2;
> }
> - omap_set_gpio_direction(row_gpios[row_idx], 1);
> + gpio_direction_input(row_gpios[row_idx]);
> }
> } else {
> col_idx = 0;
> @@ -418,10 +415,10 @@ err3:
> device_remove_file(&pdev->dev, &dev_attr_enable);
> err2:
> for (i = row_idx - 1; i >=0; i--)
> - omap_free_gpio(row_gpios[i]);
> + gpio_free(row_gpios[i]);
> err1:
> for (i = col_idx - 1; i >=0; i--)
> - omap_free_gpio(col_gpios[i]);
> + gpio_free(col_gpios[i]);
>
> kfree(omap_kp);
> input_free_device(input_dev);
> @@ -438,9 +435,9 @@ static int omap_kp_remove(struct platfor
> if (cpu_is_omap24xx()) {
> int i;
> for (i = 0; i < omap_kp->cols; i++)
> - omap_free_gpio(col_gpios[i]);
> + gpio_free(col_gpios[i]);
> for (i = 0; i < omap_kp->rows; i++) {
> - omap_free_gpio(row_gpios[i]);
> + gpio_free(row_gpios[i]);
> free_irq(OMAP_GPIO_IRQ(row_gpios[i]), 0);
> }
> } else {
> --- a/drivers/mtd/nand/ams-delta.c
> +++ b/drivers/mtd/nand/ams-delta.c
> @@ -145,7 +145,7 @@ static void ams_delta_hwcontrol(struct m
>
> static int ams_delta_nand_ready(struct mtd_info *mtd)
> {
> - return omap_get_gpio_datain(AMS_DELTA_GPIO_PIN_NAND_RB);
> + return gpio_get_value(AMS_DELTA_GPIO_PIN_NAND_RB);
> }
>
> /*
> @@ -185,7 +185,7 @@ static int __init ams_delta_init(void)
> this->read_buf = ams_delta_read_buf;
> this->verify_buf = ams_delta_verify_buf;
> this->cmd_ctrl = ams_delta_hwcontrol;
> - if (!omap_request_gpio(AMS_DELTA_GPIO_PIN_NAND_RB)) {
> + if (gpio_request(AMS_DELTA_GPIO_PIN_NAND_RB, "nand_rdy") == 0) {
> this->dev_ready = ams_delta_nand_ready;
> } else {
> this->dev_ready = NULL;
> --- a/drivers/video/omap/lcd_inn1610.c
> +++ b/drivers/video/omap/lcd_inn1610.c
> @@ -32,43 +32,43 @@ static int innovator1610_panel_init(stru
> {
> int r = 0;
>
> - if (omap_request_gpio(14)) {
> + if (gpio_request(14, "lcd_en0")) {
> pr_err(MODULE_NAME ": can't request GPIO 14\n");
> r = -1;
> goto exit;
> }
> - if (omap_request_gpio(15)) {
> + if (gpio_request(15, "lcd_en1")) {
> pr_err(MODULE_NAME ": can't request GPIO 15\n");
> - omap_free_gpio(14);
> + gpio_free(14);
> r = -1;
> goto exit;
> }
> /* configure GPIO(14, 15) as outputs */
> - omap_set_gpio_direction(14, 0);
> - omap_set_gpio_direction(15, 0);
> + gpio_direction_output(14, 0);
> + gpio_direction_output(15, 0);
> exit:
> return r;
> }
>
> static void innovator1610_panel_cleanup(struct lcd_panel *panel)
> {
> - omap_free_gpio(15);
> - omap_free_gpio(14);
> + gpio_free(15);
> + gpio_free(14);
> }
>
> static int innovator1610_panel_enable(struct lcd_panel *panel)
> {
> /* set GPIO14 and GPIO15 high */
> - omap_set_gpio_dataout(14, 1);
> - omap_set_gpio_dataout(15, 1);
> + gpio_set_value(14, 1);
> + gpio_set_value(15, 1);
> return 0;
> }
>
> static void innovator1610_panel_disable(struct lcd_panel *panel)
> {
> /* set GPIO13, GPIO14 and GPIO15 low */
> - omap_set_gpio_dataout(14, 0);
> - omap_set_gpio_dataout(15, 0);
> + gpio_set_value(14, 0);
> + gpio_set_value(15, 0);
> }
>
> static unsigned long innovator1610_panel_get_caps(struct lcd_panel *panel)
> --- a/drivers/video/omap/lcd_osk.c
> +++ b/drivers/video/omap/lcd_osk.c
> @@ -29,6 +29,7 @@
>
> static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device
> *fbdev)
> {
> + /* gpio2 was allocated in board init */
> return 0;
> }
>
> @@ -47,11 +48,8 @@ static int osk_panel_enable(struct lcd_p
> /* Set PWL level */
> omap_writeb(0xFF, OMAP_PWL_ENABLE);
>
> - /* configure GPIO2 as output */
> - omap_set_gpio_direction(2, 0);
> -
> - /* set GPIO2 high */
> - omap_set_gpio_dataout(2, 1);
> + /* set GPIO2 high (lcd power enabled) */
> + gpio_set_value(2, 1);
>
> return 0;
> }
> @@ -65,7 +63,7 @@ static void osk_panel_disable(struct lcd
> omap_writeb(0x00, OMAP_PWL_CLK_ENABLE);
>
> /* set GPIO2 low */
> - omap_set_gpio_dataout(2, 0);
> + gpio_set_value(2, 0);
> }
>
> static unsigned long osk_panel_get_caps(struct lcd_panel *panel)
> --- a/drivers/video/omap/lcd_sx1.c
> +++ b/drivers/video/omap/lcd_sx1.c
> @@ -81,21 +81,21 @@ static void epson_sendbyte(int flag, uns
> int i, shifter = 0x80;
>
> if (!flag)
> - omap_set_gpio_dataout(_A_LCD_SSC_A0, 0);
> + gpio_set_value(_A_LCD_SSC_A0, 0);
> mdelay(2);
> - omap_set_gpio_dataout(A_LCD_SSC_RD, 1);
> + gpio_set_value(A_LCD_SSC_RD, 1);
>
> - omap_set_gpio_dataout(A_LCD_SSC_SD, flag);
> + gpio_set_value(A_LCD_SSC_SD, flag);
>
> OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
> OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
> for (i = 0; i < 8; i++) {
> OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
> - omap_set_gpio_dataout(A_LCD_SSC_SD, shifter & byte);
> + gpio_set_value(A_LCD_SSC_SD, shifter & byte);
> OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
> shifter >>= 1;
> }
> - omap_set_gpio_dataout(_A_LCD_SSC_A0, 1);
> + gpio_set_value(_A_LCD_SSC_A0, 1);
> }
>
> static void init_system(void)
> @@ -107,25 +107,18 @@ static void init_system(void)
> static void setup_GPIO(void)
> {
> /* new wave */
> - omap_request_gpio(A_LCD_SSC_RD);
> - omap_request_gpio(A_LCD_SSC_SD);
> - omap_request_gpio(_A_LCD_RESET);
> - omap_request_gpio(_A_LCD_SSC_CS);
> - omap_request_gpio(_A_LCD_SSC_A0);
> -
> - /* set all GPIOs to output */
> - omap_set_gpio_direction(A_LCD_SSC_RD, 0);
> - omap_set_gpio_direction(A_LCD_SSC_SD, 0);
> - omap_set_gpio_direction(_A_LCD_RESET, 0);
> - omap_set_gpio_direction(_A_LCD_SSC_CS, 0);
> - omap_set_gpio_direction(_A_LCD_SSC_A0, 0);
> + gpio_request(A_LCD_SSC_RD, "lcd_ssc_rd");
> + gpio_request(A_LCD_SSC_SD, "lcd_ssc_sd");
> + gpio_request(_A_LCD_RESET, "lcd_reset");
> + gpio_request(_A_LCD_SSC_CS, "lcd_ssc_cs");
> + gpio_request(_A_LCD_SSC_A0, "lcd_ssc_a0");
>
> - /* set GPIO data */
> - omap_set_gpio_dataout(A_LCD_SSC_RD, 1);
> - omap_set_gpio_dataout(A_LCD_SSC_SD, 0);
> - omap_set_gpio_dataout(_A_LCD_RESET, 0);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
> - omap_set_gpio_dataout(_A_LCD_SSC_A0, 1);
> + /* set GPIOs to output, with initial data */
> + gpio_direction_output(A_LCD_SSC_RD, 1);
> + gpio_direction_output(A_LCD_SSC_SD, 0);
> + gpio_direction_output(_A_LCD_RESET, 0);
> + gpio_direction_output(_A_LCD_SSC_CS, 1);
> + gpio_direction_output(_A_LCD_SSC_A0, 1);
> }
>
> static void display_init(void)
> @@ -139,61 +132,61 @@ static void display_init(void)
> mdelay(2);
>
> /* reset LCD */
> - omap_set_gpio_dataout(A_LCD_SSC_SD, 1);
> + gpio_set_value(A_LCD_SSC_SD, 1);
> epson_sendbyte(0, 0x25);
>
> - omap_set_gpio_dataout(_A_LCD_RESET, 0);
> + gpio_set_value(_A_LCD_RESET, 0);
> mdelay(10);
> - omap_set_gpio_dataout(_A_LCD_RESET, 1);
> + gpio_set_value(_A_LCD_RESET, 1);
>
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
> + gpio_set_value(_A_LCD_SSC_CS, 1);
> mdelay(2);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
> + gpio_set_value(_A_LCD_SSC_CS, 0);
>
> /* init LCD, phase 1 */
> epson_sendbyte(0, 0xCA);
> for (i = 0; i < 10; i++)
> epson_sendbyte(1, INIT_1[i]);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
> + gpio_set_value(_A_LCD_SSC_CS, 1);
> + gpio_set_value(_A_LCD_SSC_CS, 0);
>
> /* init LCD phase 2 */
> epson_sendbyte(0, 0xCB);
> for (i = 0; i < 125; i++)
> epson_sendbyte(1, INIT_2[i]);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
> + gpio_set_value(_A_LCD_SSC_CS, 1);
> + gpio_set_value(_A_LCD_SSC_CS, 0);
>
> /* init LCD phase 2a */
> epson_sendbyte(0, 0xCC);
> for (i = 0; i < 14; i++)
> epson_sendbyte(1, INIT_3[i]);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
> + gpio_set_value(_A_LCD_SSC_CS, 1);
> + gpio_set_value(_A_LCD_SSC_CS, 0);
>
> /* init LCD phase 3 */
> epson_sendbyte(0, 0xBC);
> epson_sendbyte(1, 0x08);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
> + gpio_set_value(_A_LCD_SSC_CS, 1);
> + gpio_set_value(_A_LCD_SSC_CS, 0);
>
> /* init LCD phase 4 */
> epson_sendbyte(0, 0x07);
> epson_sendbyte(1, 0x05);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
> + gpio_set_value(_A_LCD_SSC_CS, 1);
> + gpio_set_value(_A_LCD_SSC_CS, 0);
>
> /* init LCD phase 5 */
> epson_sendbyte(0, 0x94);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
> + gpio_set_value(_A_LCD_SSC_CS, 1);
> + gpio_set_value(_A_LCD_SSC_CS, 0);
>
> /* init LCD phase 6 */
> epson_sendbyte(0, 0xC6);
> epson_sendbyte(1, 0x80);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
> + gpio_set_value(_A_LCD_SSC_CS, 1);
> mdelay(100); /* used to be 1000 */
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
> + gpio_set_value(_A_LCD_SSC_CS, 0);
>
> /* init LCD phase 7 */
> epson_sendbyte(0, 0x16);
> @@ -201,8 +194,8 @@ static void display_init(void)
> epson_sendbyte(1, 0x00);
> epson_sendbyte(1, 0xB1);
> epson_sendbyte(1, 0x00);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
> + gpio_set_value(_A_LCD_SSC_CS, 1);
> + gpio_set_value(_A_LCD_SSC_CS, 0);
>
> /* init LCD phase 8 */
> epson_sendbyte(0, 0x76);
> @@ -210,12 +203,12 @@ static void display_init(void)
> epson_sendbyte(1, 0x00);
> epson_sendbyte(1, 0xDB);
> epson_sendbyte(1, 0x00);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
> + gpio_set_value(_A_LCD_SSC_CS, 1);
> + gpio_set_value(_A_LCD_SSC_CS, 0);
>
> /* init LCD phase 9 */
> epson_sendbyte(0, 0xAF);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
> + gpio_set_value(_A_LCD_SSC_CS, 1);
> }
>
> static int sx1_panel_init(struct lcd_panel *panel, struct omapfb_device
> *fbdev)
> @@ -231,18 +224,18 @@ static void sx1_panel_disable(struct lcd
> {
> printk(KERN_INFO "SX1: LCD panel disable\n");
> sx1_setmmipower(0);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
> + gpio_set_value(_A_LCD_SSC_CS, 1);
>
> epson_sendbyte(0, 0x25);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
> + gpio_set_value(_A_LCD_SSC_CS, 0);
>
> epson_sendbyte(0, 0xAE);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
> + gpio_set_value(_A_LCD_SSC_CS, 1);
> mdelay(100);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
> + gpio_set_value(_A_LCD_SSC_CS, 0);
>
> epson_sendbyte(0, 0x95);
> - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
> + gpio_set_value(_A_LCD_SSC_CS, 1);
> }
>
> static int sx1_panel_enable(struct lcd_panel *panel)
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
