This enables support for MPU OFF in idle.
Signed-off-by: Rajendra Nayak <[EMAIL PROTECTED]>
---
arch/arm/mach-omap2/pm34xx.c | 11 ++++++++++-
arch/arm/mach-omap2/sleep34xx.S | 13 ++++++++-----
2 files changed, 18 insertions(+), 6 deletions(-)
Index: linux-omap-2.6/arch/arm/mach-omap2/pm34xx.c
===================================================================
--- linux-omap-2.6.orig/arch/arm/mach-omap2/pm34xx.c 2008-09-26
14:18:38.000000000 +0530
+++ linux-omap-2.6/arch/arm/mach-omap2/pm34xx.c 2008-09-26 14:30:38.000000000
+0530
@@ -31,6 +31,7 @@
#include <mach/powerdomain.h>
#include <mach/common.h>
#include <mach/control.h>
+#include <mach/sdrc.h>
#include <asm/tlbflush.h>
#include "cm.h"
@@ -206,6 +207,9 @@ static void omap_sram_idle(void)
/* No need to save context */
save_state = 0;
break;
+ case PWRDM_POWER_OFF:
+ save_state = 3;
+ break;
default:
/* Invalid state */
printk(KERN_ERR "Invalid mpu state in sram_idle\n");
@@ -237,7 +241,12 @@ static void omap_sram_idle(void)
prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
}
- _omap_sram_idle(NULL, save_state);
+ /*
+ * omap3_arm_context is the location where ARM registers
+ * get saved. The restore path then reads from this
+ * location and restores them back.
+ */
+ _omap_sram_idle(omap3_arm_context, save_state);
/* Restore table entry modified during MMU restoration */
if (pwrdm_read_prev_pwrst(mpu_pwrdm) == PWRDM_POWER_OFF)
restore_table_entry();
Index: linux-omap-2.6/arch/arm/mach-omap2/sleep34xx.S
===================================================================
--- linux-omap-2.6.orig/arch/arm/mach-omap2/sleep34xx.S 2008-09-26
14:00:37.000000000 +0530
+++ linux-omap-2.6/arch/arm/mach-omap2/sleep34xx.S 2008-09-26
14:28:09.000000000 +0530
@@ -37,12 +37,15 @@
OMAP3430_PM_PREPWSTST)
#define PM_PREPWSTST_MPU_V OMAP34XX_PRM_REGADDR(MPU_MOD, \
OMAP3430_PM_PREPWSTST)
-#define PM_PWSTCTRL_MPU_P OMAP34XX_PRM_REGADDR(MPU_MOD, PM_PWSTCTRL)
+/*
+ * This is the physical address of the register as specified
+ * by the _P. To be used while the MMU is still disabled.
+ */
+#define PM_PWSTCTRL_MPU_P (OMAP3430_PRM_BASE + MPU_MOD + PM_PWSTCTRL)
#define SCRATCHPAD_MEM_OFFS 0x310 /* Move this as correct place is
* available */
-#define SCRATCHPAD_BASE_P OMAP343X_CTRL_REGADDR(\
- OMAP343X_CONTROL_MEM_WKUP +\
- SCRATCHPAD_MEM_OFFS)
+#define SCRATCHPAD_BASE_P (OMAP343X_CTRL_BASE + OMAP343X_CONTROL_MEM_WKUP\
+ + SCRATCHPAD_MEM_OFFS)
#define SDRC_POWER_V OMAP34XX_SDRC_REGADDR(SDRC_POWER)
.text
@@ -97,7 +100,7 @@ loop:
ldmfd sp!, {r0-r12, pc} @ restore regs and return
restore:
- /* b restore*/ @ Enable to debug restore code
+ /* b restore*/ @ Enable to debug restore code
/* Check what was the reason for mpu reset and store the reason in r9*/
/* 1 - Only L1 and logic lost */
/* 2 - Only L2 lost - In this case, we wont be here */
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
