From: David Brownell <[EMAIL PROTECTED]>
Make the twl4030 core create a platform device to which its
GPIO code will bind, with platform_data used to configure
board-specific behaviors and configuration.
Update the twl4030 GPIO code:
- Morph its gpio function code into a platform driver.
- Move away from IRQ (and GPIO) numbers hard-wired in headers.
- Hook up the twl4030 GPIO code to gpiolib.
- Start phasing out the older TWL-specific calls ... currently
those are used only by arch/arm/mach-omap2/hsmmc.c setup code.
- Use a mutex for locking, not a binary semaphore.
NOTE: more patches pending: (a) this doesn't use pdata->pullups
to initialize (currently hsmmc code always sets GPIO-0 pullup even
if the board has an external pullup); (b) there's a new gpio
request/free hook forthcoming in 2.6.28, which this should use;
(c) likewise there's a new gpio_to_irq() hook; (d) the irq_chip
set_type() mechanism needs to be supported; (e) needs to move over
to drivers/gpio; (f) upcoming threaded IRQ infrastructure should
be used, when that merges.
Signed-off-by: David Brownell <[EMAIL PROTECTED]>
Signed-off-by: Felipe Balbi <[EMAIL PROTECTED]>
---
drivers/i2c/chips/Kconfig | 2 +-
drivers/i2c/chips/twl4030-core.c | 44 ++++++
drivers/i2c/chips/twl4030-gpio.c | 273 +++++++++++++++++++++++++++-----------
3 files changed, 238 insertions(+), 81 deletions(-)
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 121aec9..1a21388 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -159,7 +159,7 @@ config TWL4030_CORE
config TWL4030_GPIO
bool "TWL4030 GPIO Driver"
- depends on TWL4030_CORE
+ depends on TWL4030_CORE && GPIOLIB
config TWL4030_MADC
tristate "TWL4030 MADC Driver"
diff --git a/drivers/i2c/chips/twl4030-core.c b/drivers/i2c/chips/twl4030-core.c
index 02be771..c9460f7 100644
--- a/drivers/i2c/chips/twl4030-core.c
+++ b/drivers/i2c/chips/twl4030-core.c
@@ -63,6 +63,12 @@
#define twl_has_usb() false
#endif
+#ifdef CONFIG_TWL4030_GPIO
+#define twl_has_gpio() true
+#else
+#define twl_has_gpio() false
+#endif
+
/* Primary Interrupt Handler on TWL4030 Registers */
/* Register Definitions */
@@ -656,6 +662,44 @@ static int add_children(struct twl4030_platform_data
*pdata)
struct twl4030_client *twl = NULL;
int status = 0;
+ if (twl_has_gpio() && pdata->gpio) {
+ twl = &twl4030_modules[TWL4030_SLAVENUM_NUM1];
+
+ pdev = platform_device_alloc("twl4030_gpio", -1);
+ if (!pdev)
+ status = -ENOMEM;
+
+ /* more driver model init */
+ if (status == 0) {
+ pdev->dev.parent = &twl->client->dev;
+ /* device_init_wakeup(&pdev->dev, 1); */
+
+ status = platform_device_add_data(pdev, pdata->gpio,
+ sizeof(*pdata->gpio));
+ }
+
+ /* GPIO module IRQ */
+ if (status == 0) {
+ struct resource r = {
+ .start = pdata->irq_base + 0,
+ .flags = IORESOURCE_IRQ,
+ };
+
+ status = platform_device_add_resources(pdev, &r, 1);
+ }
+
+ if (status == 0)
+ status = platform_device_add(pdev);
+
+ if (status < 0) {
+ platform_device_put(pdev);
+ dev_dbg(&twl->client->dev,
+ "can't create gpio dev, %d\n",
+ status);
+ goto err;
+ }
+ }
+
if (twl_has_rtc()) {
pdev = platform_device_alloc("twl4030_rtc", -1);
if (pdev) {
diff --git a/drivers/i2c/chips/twl4030-gpio.c b/drivers/i2c/chips/twl4030-gpio.c
index b51bed0..0d4dd28 100644
--- a/drivers/i2c/chips/twl4030-gpio.c
+++ b/drivers/i2c/chips/twl4030-gpio.c
@@ -31,22 +31,31 @@
#include <linux/init.h>
#include <linux/time.h>
#include <linux/interrupt.h>
-#include <linux/random.h>
-#include <linux/syscalls.h>
+#include <linux/device.h>
#include <linux/kthread.h>
#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
-#include <linux/i2c.h>
#include <linux/i2c/twl4030.h>
#include <linux/i2c/twl4030-gpio.h>
-#include <linux/slab.h>
#include <mach/irqs.h>
#include <asm/mach/irq.h>
#include <mach/gpio.h>
#include <mach/mux.h>
-#include <linux/device.h>
+
+/* REVISIT when these symbols vanish elsewhere, remove them here too */
+#undef TWL4030_GPIO_IRQ_BASE
+#undef TWL4030_GPIO_IRQ_END
+#undef TWL4030_MODIRQ_GPIO
+
+static struct gpio_chip twl_gpiochip;
+static int twl4030_gpio_irq_base;
+static int twl4030_gpio_irq_end;
+
/* BitField Definitions */
@@ -130,7 +139,7 @@
#define GPIO_32_MASK 0x0003ffff
/* Data structures */
-static struct semaphore gpio_sem;
+static DEFINE_MUTEX(gpio_lock);
/* store usage of each GPIO. - each bit represents one GPIO */
static unsigned int gpio_usage_count;
@@ -147,7 +156,7 @@ static struct task_struct *gpio_unmask_thread;
/*
* Helper functions to read and write the GPIO ISR and IMR registers as
* 32-bit integers. Functions return 0 on success, non-zero otherwise.
- * The caller must hold a lock on gpio_sem.
+ * The caller must hold gpio_lock.
*/
static int gpio_read_isr(unsigned int *isr)
@@ -197,25 +206,25 @@ static int gpio_write_imr(unsigned int imr)
*/
static void twl4030_gpio_mask_and_ack(unsigned int irq)
{
- int gpio = irq - TWL4030_GPIO_IRQ_BASE;
+ int gpio = irq - twl4030_gpio_irq_base;
- down(&gpio_sem);
+ mutex_lock(&gpio_lock);
/* mask */
gpio_imr_shadow |= (1 << gpio);
gpio_write_imr(gpio_imr_shadow);
/* ack */
gpio_write_isr(1 << gpio);
- up(&gpio_sem);
+ mutex_unlock(&gpio_lock);
}
static void twl4030_gpio_unmask(unsigned int irq)
{
- int gpio = irq - TWL4030_GPIO_IRQ_BASE;
+ int gpio = irq - twl4030_gpio_irq_base;
- down(&gpio_sem);
+ mutex_lock(&gpio_lock);
gpio_imr_shadow &= ~(1 << gpio);
gpio_write_imr(gpio_imr_shadow);
- up(&gpio_sem);
+ mutex_unlock(&gpio_lock);
}
/*
@@ -234,7 +243,7 @@ static void twl4030_gpio_mask_irqchip(unsigned int irq) {}
static void twl4030_gpio_unmask_irqchip(unsigned int irq)
{
- int gpio = irq - TWL4030_GPIO_IRQ_BASE;
+ int gpio = irq - twl4030_gpio_irq_base;
gpio_pending_unmask |= (1 << gpio);
if (gpio_unmask_thread && gpio_unmask_thread->state != TASK_RUNNING)
@@ -242,7 +251,7 @@ static void twl4030_gpio_unmask_irqchip(unsigned int irq)
}
static struct irq_chip twl4030_gpio_irq_chip = {
- .name = "twl4030-gpio",
+ .name = "twl4030",
.ack = twl4030_gpio_mask_and_ack_irqchip,
.mask = twl4030_gpio_mask_irqchip,
.unmask = twl4030_gpio_unmask_irqchip,
@@ -297,21 +306,26 @@ int twl4030_request_gpio(int gpio)
if (unlikely(gpio >= TWL4030_GPIO_MAX))
return -EPERM;
- down(&gpio_sem);
- if (gpio_usage_count & (0x1 << gpio))
+ ret = gpio_request(twl_gpiochip.base + gpio, NULL);
+ if (ret < 0)
+ return ret;
+
+ mutex_lock(&gpio_lock);
+ if (gpio_usage_count & (0x1 << gpio)) {
ret = -EBUSY;
- else {
+ } else {
/* First time usage? - switch on GPIO module */
if (!gpio_usage_count) {
- ret =
- gpio_twl4030_write(REG_GPIO_CTRL,
+ ret = gpio_twl4030_write(REG_GPIO_CTRL,
MASK_GPIO_CTRL_GPIO_ON);
ret = gpio_twl4030_write(REG_GPIO_SIH_CTRL, 0x00);
}
if (!ret)
gpio_usage_count |= (0x1 << gpio);
+ else
+ gpio_free(twl_gpiochip.base + gpio);
}
- up(&gpio_sem);
+ mutex_unlock(&gpio_lock);
return ret;
}
EXPORT_SYMBOL(twl4030_request_gpio);
@@ -326,18 +340,20 @@ int twl4030_free_gpio(int gpio)
if (unlikely(gpio >= TWL4030_GPIO_MAX))
return -EPERM;
- down(&gpio_sem);
+ mutex_lock(&gpio_lock);
- if ((gpio_usage_count & (0x1 << gpio)) == 0)
+ if ((gpio_usage_count & (0x1 << gpio)) == 0) {
ret = -EPERM;
- else
+ } else {
gpio_usage_count &= ~(0x1 << gpio);
+ gpio_free(twl_gpiochip.base + gpio);
+ }
/* Last time usage? - switch off GPIO module */
- if (!gpio_usage_count)
+ if (ret == 0 && !gpio_usage_count)
ret = gpio_twl4030_write(REG_GPIO_CTRL, 0x0);
- up(&gpio_sem);
+ mutex_unlock(&gpio_lock);
return ret;
}
EXPORT_SYMBOL(twl4030_free_gpio);
@@ -345,21 +361,18 @@ EXPORT_SYMBOL(twl4030_free_gpio);
/*
* Set direction for TWL4030 GPIO
*/
-int twl4030_set_gpio_direction(int gpio, int is_input)
+static int twl4030_set_gpio_direction(int gpio, int is_input)
{
u8 d_bnk = GET_GPIO_DATA_BANK(gpio);
u8 d_msk = MASK_GPIODATADIR_GPIOxDIR(GET_GPIO_DATA_OFF(gpio));
u8 reg = 0;
- u8 base = 0;
+ u8 base = REG_GPIODATADIR1 + d_bnk;
int ret = 0;
- if (unlikely((gpio >= TWL4030_GPIO_MAX)
- || !(gpio_usage_count & (0x1 << gpio))))
+ if (unlikely(!(gpio_usage_count & (0x1 << gpio))))
return -EPERM;
- base = REG_GPIODATADIR1 + d_bnk;
-
- down(&gpio_sem);
+ mutex_lock(&gpio_lock);
ret = gpio_twl4030_read(base);
if (ret >= 0) {
if (is_input)
@@ -369,23 +382,21 @@ int twl4030_set_gpio_direction(int gpio, int is_input)
ret = gpio_twl4030_write(base, reg);
}
- up(&gpio_sem);
+ mutex_unlock(&gpio_lock);
return ret;
}
-EXPORT_SYMBOL(twl4030_set_gpio_direction);
/*
* To enable/disable GPIO pin on TWL4030
*/
-int twl4030_set_gpio_dataout(int gpio, int enable)
+static int twl4030_set_gpio_dataout(int gpio, int enable)
{
u8 d_bnk = GET_GPIO_DATA_BANK(gpio);
u8 d_msk = MASK_GPIODATAOUT_GPIOxOUT(GET_GPIO_DATA_OFF(gpio));
u8 base = 0;
int ret = 0;
- if (unlikely((gpio >= TWL4030_GPIO_MAX)
- || !(gpio_usage_count & (0x1 << gpio))))
+ if (unlikely(!(gpio_usage_count & (0x1 << gpio))))
return -EPERM;
if (enable)
@@ -393,12 +404,11 @@ int twl4030_set_gpio_dataout(int gpio, int enable)
else
base = REG_CLEARGPIODATAOUT1 + d_bnk;
- down(&gpio_sem);
+ mutex_lock(&gpio_lock);
ret = gpio_twl4030_write(base, d_msk);
- up(&gpio_sem);
+ mutex_unlock(&gpio_lock);
return ret;
}
-EXPORT_SYMBOL(twl4030_set_gpio_dataout);
/*
* To get the status of a GPIO pin on TWL4030
@@ -415,9 +425,9 @@ int twl4030_get_gpio_datain(int gpio)
return -EPERM;
base = REG_GPIODATAIN1 + d_bnk;
- down(&gpio_sem);
+ mutex_lock(&gpio_lock);
ret = gpio_twl4030_read(base);
- up(&gpio_sem);
+ mutex_unlock(&gpio_lock);
if (ret > 0)
ret = (ret >> d_off) & 0x1;
@@ -425,6 +435,7 @@ int twl4030_get_gpio_datain(int gpio)
}
EXPORT_SYMBOL(twl4030_get_gpio_datain);
+#if 0
/*
* Configure PULL type for a GPIO pin on TWL4030
*/
@@ -447,7 +458,7 @@ int twl4030_set_gpio_pull(int gpio, int pull_dircn)
else if (pull_dircn == TWL4030_GPIO_PULL_UP)
c_msk = MASK_GPIOPUPDCTR1_GPIOxPU(c_off);
- down(&gpio_sem);
+ mutex_lock(&gpio_lock);
ret = gpio_twl4030_read(base);
if (ret >= 0) {
/* clear the previous up/down values */
@@ -457,13 +468,15 @@ int twl4030_set_gpio_pull(int gpio, int pull_dircn)
reg |= c_msk;
ret = gpio_twl4030_write(base, reg);
}
- up(&gpio_sem);
+ mutex_unlock(&gpio_lock);
return ret;
}
-EXPORT_SYMBOL(twl4030_set_gpio_pull);
+#endif
/*
* Configure Edge control for a GPIO pin on TWL4030
+ *
+ * FIXME this should just be the irq_chip.set_type() method
*/
int twl4030_set_gpio_edge_ctrl(int gpio, int edge)
{
@@ -486,7 +499,7 @@ int twl4030_set_gpio_edge_ctrl(int gpio, int edge)
if (edge & TWL4030_GPIO_EDGE_FALLING)
c_msk |= MASK_GPIO_EDR1_GPIOxFALLING(c_off);
- down(&gpio_sem);
+ mutex_lock(&gpio_lock);
ret = gpio_twl4030_read(base);
if (ret >= 0) {
/* clear the previous rising/falling values */
@@ -497,7 +510,7 @@ int twl4030_set_gpio_edge_ctrl(int gpio, int edge)
reg |= c_msk;
ret = gpio_twl4030_write(base, reg);
}
- up(&gpio_sem);
+ mutex_unlock(&gpio_lock);
return ret;
}
EXPORT_SYMBOL(twl4030_set_gpio_edge_ctrl);
@@ -518,7 +531,7 @@ int twl4030_set_gpio_debounce(int gpio, int enable)
return -EPERM;
base = REG_GPIO_DEBEN1 + d_bnk;
- down(&gpio_sem);
+ mutex_lock(&gpio_lock);
ret = gpio_twl4030_read(base);
if (ret >= 0) {
if (enable)
@@ -528,11 +541,12 @@ int twl4030_set_gpio_debounce(int gpio, int enable)
ret = gpio_twl4030_write(base, reg);
}
- up(&gpio_sem);
+ mutex_unlock(&gpio_lock);
return ret;
}
EXPORT_SYMBOL(twl4030_set_gpio_debounce);
+#if 0
/*
* Configure Card detect for GPIO pin on TWL4030
*/
@@ -549,7 +563,7 @@ int twl4030_set_gpio_card_detect(int gpio, int enable)
return -EPERM;
}
- down(&gpio_sem);
+ mutex_lock(&gpio_lock);
ret = gpio_twl4030_read(REG_GPIO_CTRL);
if (ret >= 0) {
if (enable)
@@ -559,10 +573,10 @@ int twl4030_set_gpio_card_detect(int gpio, int enable)
ret = gpio_twl4030_write(REG_GPIO_CTRL, reg);
}
- up(&gpio_sem);
+ mutex_unlock(&gpio_lock);
return (ret);
}
-EXPORT_SYMBOL(twl4030_set_gpio_card_detect);
+#endif
/* MODULE FUNCTIONS */
@@ -590,7 +604,7 @@ static int twl4030_gpio_unmask_thread(void *data)
gpio_pending_unmask = 0;
local_irq_enable();
- for (irq = TWL4030_GPIO_IRQ_BASE; 0 != gpio_unmask;
+ for (irq = twl4030_gpio_irq_base; 0 != gpio_unmask;
gpio_unmask >>= 1, irq++) {
if (gpio_unmask & 0x1)
twl4030_gpio_unmask(irq);
@@ -677,12 +691,12 @@ static void do_twl4030_gpio_module_irq(unsigned int irq,
irq_desc_t *desc)
kstat_cpu(cpu).irqs[irq]++;
local_irq_enable();
- down(&gpio_sem);
+ mutex_lock(&gpio_lock);
if (gpio_read_isr(&gpio_isr))
gpio_isr = 0;
- up(&gpio_sem);
+ mutex_unlock(&gpio_lock);
- for (gpio_irq = TWL4030_GPIO_IRQ_BASE; 0 != gpio_isr;
+ for (gpio_irq = twl4030_gpio_irq_base; 0 != gpio_isr;
gpio_isr >>= 1, gpio_irq++) {
if (gpio_isr & 0x1) {
irq_desc_t *d = irq_desc + gpio_irq;
@@ -698,19 +712,60 @@ static void do_twl4030_gpio_module_irq(unsigned int irq,
irq_desc_t *desc)
}
}
-/* TWL4030 Initialization module */
-static int __init gpio_twl4030_init(void)
+/*----------------------------------------------------------------------*/
+
+static int twl_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+ return twl4030_set_gpio_direction(offset, 1);
+}
+
+static int twl_get(struct gpio_chip *chip, unsigned offset)
+{
+ int status = twl4030_get_gpio_datain(offset);
+
+ return (status < 0) ? 0 : status;
+}
+
+static int twl_direction_out(struct gpio_chip *chip, unsigned offset, int
value)
+{
+ twl4030_set_gpio_dataout(offset, value);
+ return twl4030_set_gpio_direction(offset, 0);
+}
+
+static void twl_set(struct gpio_chip *chip, unsigned offset, int value)
{
+ twl4030_set_gpio_dataout(offset, value);
+}
+
+static struct gpio_chip twl_gpiochip = {
+ .label = "twl4030",
+ .owner = THIS_MODULE,
+ .direction_input = twl_direction_in,
+ .get = twl_get,
+ .direction_output = twl_direction_out,
+ .set = twl_set,
+ .can_sleep = 1,
+};
+
+/*----------------------------------------------------------------------*/
+
+static int gpio_twl4030_remove(struct platform_device *pdev);
+
+static int __devinit gpio_twl4030_probe(struct platform_device *pdev)
+{
+ struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
int ret;
int irq = 0;
- /* init the global locking sem */
- sema_init(&gpio_sem, 1);
-
/* All GPIO interrupts are initially masked */
gpio_pending_unmask = 0;
gpio_imr_shadow = GPIO_32_MASK;
ret = gpio_write_imr(gpio_imr_shadow);
+
+ twl4030_gpio_irq_base = pdata->irq_base;
+ twl4030_gpio_irq_end = pdata->irq_end;
+
+ /* REVISIT skip most of this if the irq range is empty... */
if (!ret) {
/*
* Create a kernel thread to handle deferred unmasking of gpio
@@ -719,50 +774,88 @@ static int __init gpio_twl4030_init(void)
gpio_unmask_thread = kthread_create(twl4030_gpio_unmask_thread,
NULL, "twl4030 gpio");
if (!gpio_unmask_thread) {
- printk(KERN_ERR
- "%s: could not create twl4030 gpio unmask"
- " thread!\n", __func__);
+ dev_err(&pdev->dev,
+ "could not create twl4030 gpio unmask"
+ " thread!\n");
ret = -ENOMEM;
}
}
if (!ret) {
/* install an irq handler for each of the gpio interrupts */
- for (irq = TWL4030_GPIO_IRQ_BASE; irq < TWL4030_GPIO_IRQ_END;
- irq++) {
+ for (irq = twl4030_gpio_irq_base; irq < twl4030_gpio_irq_end;
+ irq++) {
set_irq_chip(irq, &twl4030_gpio_irq_chip);
set_irq_handler(irq, do_twl4030_gpio_irq);
set_irq_flags(irq, IRQF_VALID);
}
+ /* gpio module IRQ */
+ irq = platform_get_irq(pdev, 0);
+
/*
* Install an irq handler to demultiplex the gpio module
* interrupt.
*/
- set_irq_chip(TWL4030_MODIRQ_GPIO,
- &twl4030_gpio_module_irq_chip);
- set_irq_chained_handler(TWL4030_MODIRQ_GPIO,
- do_twl4030_gpio_module_irq);
+ set_irq_chip(irq, &twl4030_gpio_module_irq_chip);
+ set_irq_chained_handler(irq, do_twl4030_gpio_module_irq);
wake_up_process(gpio_unmask_thread);
+
+ dev_info(&pdev->dev, "IRQ %d chains IRQs %d..%d\n", irq,
+ twl4030_gpio_irq_base, twl4030_gpio_irq_end - 1);
+ }
+
+ if (!ret) {
+ twl_gpiochip.base = pdata->gpio_base;
+ twl_gpiochip.ngpio = TWL4030_GPIO_MAX;
+ twl_gpiochip.dev = &pdev->dev;
+
+ ret = gpiochip_add(&twl_gpiochip);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "could not register gpiochip, %d\n",
+ ret);
+ twl_gpiochip.ngpio = 0;
+ gpio_twl4030_remove(pdev);
+ } else if (pdata->setup) {
+ int status;
+
+ status = pdata->setup(&pdev->dev,
+ pdata->gpio_base, TWL4030_GPIO_MAX);
+ if (status)
+ dev_dbg(&pdev->dev, "setup --> %d\n", status);
+ }
}
- printk(KERN_INFO "TWL4030 GPIO Demux: IRQ Range %d to %d,"
- " Initialization %s\n", TWL4030_GPIO_IRQ_BASE,
- TWL4030_GPIO_IRQ_END, (ret) ? "Failed" : "Success");
return ret;
}
-/* TWL GPIO exit module */
-static void __exit gpio_twl4030_exit(void)
+static int __devexit gpio_twl4030_remove(struct platform_device *pdev)
{
+ struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
+ int status;
int irq;
+ if (pdata->teardown) {
+ status = pdata->teardown(&pdev->dev,
+ pdata->gpio_base, TWL4030_GPIO_MAX);
+ if (status) {
+ dev_dbg(&pdev->dev, "teardown --> %d\n", status);
+ return status;
+ }
+ }
+
+ status = gpiochip_remove(&twl_gpiochip);
+ if (status < 0)
+ return status;
+
/* uninstall the gpio demultiplexing interrupt handler */
- set_irq_handler(TWL4030_MODIRQ_GPIO, NULL);
- set_irq_flags(TWL4030_MODIRQ_GPIO, 0);
+ irq = platform_get_irq(pdev, 0);
+ set_irq_handler(irq, NULL);
+ set_irq_flags(irq, 0);
/* uninstall the irq handler for each of the gpio interrupts */
- for (irq = TWL4030_GPIO_IRQ_BASE; irq < TWL4030_GPIO_IRQ_END; irq++) {
+ for (irq = twl4030_gpio_irq_base; irq < twl4030_gpio_irq_end; irq++) {
set_irq_handler(irq, NULL);
set_irq_flags(irq, 0);
}
@@ -772,12 +865,32 @@ static void __exit gpio_twl4030_exit(void)
kthread_stop(gpio_unmask_thread);
gpio_unmask_thread = NULL;
}
+
+ return 0;
}
+/* Note: this hardware lives inside an I2C-based multi-function device. */
+MODULE_ALIAS("platform:twl4030_gpio");
+
+static struct platform_driver gpio_twl4030_driver = {
+ .driver.name = "twl4030_gpio",
+ .driver.owner = THIS_MODULE,
+ .probe = gpio_twl4030_probe,
+ .remove = __devexit_p(gpio_twl4030_remove),
+};
+
+static int __init gpio_twl4030_init(void)
+{
+ return platform_driver_register(&gpio_twl4030_driver);
+}
module_init(gpio_twl4030_init);
+
+static void __exit gpio_twl4030_exit(void)
+{
+ platform_driver_unregister(&gpio_twl4030_driver);
+}
module_exit(gpio_twl4030_exit);
-MODULE_ALIAS("i2c:twl4030-gpio");
MODULE_AUTHOR("Texas Instruments, Inc.");
MODULE_DESCRIPTION("GPIO interface for TWL4030");
MODULE_LICENSE("GPL");
--
1.6.0.2.307.gc427
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
