From: David Brownell <[EMAIL PROTECTED]>
Minor twl4030-core cleanups: alphabetize the creation of the
new sub-function nodes; wrap an #if around the OMAP-only part
(to get more general build testing when this goes upstream);
remove reference to undocumented "twl3040" variant.
Signed-off-by: David Brownell <[EMAIL PROTECTED]>
Moved gpio before keypad driver due to alphabetic order.
Signed-off-by: Felipe Balbi <[EMAIL PROTECTED]>
---
drivers/i2c/chips/twl4030-core.c | 103 +++++++++++++++++++------------------
1 files changed, 53 insertions(+), 50 deletions(-)
diff --git a/drivers/i2c/chips/twl4030-core.c b/drivers/i2c/chips/twl4030-core.c
index 79d4d82..22850a8 100644
--- a/drivers/i2c/chips/twl4030-core.c
+++ b/drivers/i2c/chips/twl4030-core.c
@@ -45,24 +45,12 @@
#define DRIVER_NAME "twl4030"
-#if defined(CONFIG_RTC_DRV_TWL4030) || defined(CONFIG_RTC_DRV_TWL4030_MODULE)
-#define twl_has_rtc() true
-#else
-#define twl_has_rtc() false
-#endif
-
#if defined(CONFIG_KEYBOARD_TWL4030) || defined(CONFIG_KEYBOARD_TWL4030_MODULE)
#define twl_has_keypad() true
#else
#define twl_has_keypad() false
#endif
-#if defined(CONFIG_TWL4030_USB) || defined(CONFIG_TWL4030_USB_MODULE)
-#define twl_has_usb() true
-#else
-#define twl_has_usb() false
-#endif
-
#ifdef CONFIG_TWL4030_GPIO
#define twl_has_gpio() true
#else
@@ -75,6 +63,18 @@
#define twl_has_madc() false
#endif
+#if defined(CONFIG_RTC_DRV_TWL4030) || defined(CONFIG_RTC_DRV_TWL4030_MODULE)
+#define twl_has_rtc() true
+#else
+#define twl_has_rtc() false
+#endif
+
+#if defined(CONFIG_TWL4030_USB) || defined(CONFIG_TWL4030_USB_MODULE)
+#define twl_has_usb() true
+#else
+#define twl_has_usb() false
+#endif
+
/* Primary Interrupt Handler on TWL4030 Registers */
/* Register Definitions */
@@ -706,27 +706,18 @@ static int add_children(struct twl4030_platform_data
*pdata)
}
}
- if (twl_has_rtc()) {
- pdev = platform_device_alloc("twl4030_rtc", -1);
+ if (twl_has_keypad() && pdata->keypad) {
+ pdev = platform_device_alloc("twl4030_keypad", -1);
if (pdev) {
- twl = &twl4030_modules[TWL4030_SLAVENUM_NUM3];
+ twl = &twl4030_modules[TWL4030_SLAVENUM_NUM2];
pdev->dev.parent = &twl->client->dev;
device_init_wakeup(&pdev->dev, 1);
-
- /*
- * FIXME add the relevant IRQ resource, and make the
- * rtc driver use it instead of hard-wiring ...
- *
- * REVISIT platform_data here currently only supports
- * setting up the "msecure" line ... which actually
- * violates the "princple of least privilege", since
- * it's effectively always in "high trust" mode.
- *
- * For now, expect equivalent treatment at board init:
- * setting msecure high. Eventually, Linux might
- * become more aware of those HW security concerns.
- */
-
+ status = platform_device_add_data(pdev, pdata->keypad,
+ sizeof(*pdata->keypad));
+ if (status < 0) {
+ platform_device_put(pdev);
+ goto err;
+ }
status = platform_device_add(pdev);
if (status < 0)
platform_device_put(pdev);
@@ -736,14 +727,14 @@ static int add_children(struct twl4030_platform_data
*pdata)
}
}
- if (twl_has_keypad() && pdata->keypad) {
- pdev = platform_device_alloc("twl4030_keypad", -1);
+ if (twl_has_madc() && pdata->madc) {
+ pdev = platform_device_alloc("twl4030_madc", -1);
if (pdev) {
twl = &twl4030_modules[TWL4030_SLAVENUM_NUM2];
pdev->dev.parent = &twl->client->dev;
device_init_wakeup(&pdev->dev, 1);
- status = platform_device_add_data(pdev, pdata->keypad,
- sizeof(*pdata->keypad));
+ status = platform_device_add_data(pdev, pdata->madc,
+ sizeof(*pdata->madc));
if (status < 0) {
platform_device_put(pdev);
goto err;
@@ -757,18 +748,27 @@ static int add_children(struct twl4030_platform_data
*pdata)
}
}
- if (twl_has_usb() && pdata->usb) {
- pdev = platform_device_alloc("twl4030_usb", -1);
+ if (twl_has_rtc()) {
+ pdev = platform_device_alloc("twl4030_rtc", -1);
if (pdev) {
- twl = &twl4030_modules[TWL4030_SLAVENUM_NUM0];
+ twl = &twl4030_modules[TWL4030_SLAVENUM_NUM3];
pdev->dev.parent = &twl->client->dev;
device_init_wakeup(&pdev->dev, 1);
- status = platform_device_add_data(pdev, pdata->usb,
- sizeof(*pdata->usb));
- if (status < 0) {
- platform_device_put(pdev);
- goto err;
- }
+
+ /*
+ * FIXME add the relevant IRQ resource, and make the
+ * rtc driver use it instead of hard-wiring ...
+ *
+ * REVISIT platform_data here currently only supports
+ * setting up the "msecure" line ... which actually
+ * violates the "princple of least privilege", since
+ * it's effectively always in "high trust" mode.
+ *
+ * For now, expect equivalent treatment at board init:
+ * setting msecure high. Eventually, Linux might
+ * become more aware of those HW security concerns.
+ */
+
status = platform_device_add(pdev);
if (status < 0)
platform_device_put(pdev);
@@ -778,14 +778,14 @@ static int add_children(struct twl4030_platform_data
*pdata)
}
}
- if (twl_has_madc() && pdata->madc) {
- pdev = platform_device_alloc("twl4030_madc", -1);
+ if (twl_has_usb() && pdata->usb) {
+ pdev = platform_device_alloc("twl4030_usb", -1);
if (pdev) {
- twl = &twl4030_modules[TWL4030_SLAVENUM_NUM2];
+ twl = &twl4030_modules[TWL4030_SLAVENUM_NUM0];
pdev->dev.parent = &twl->client->dev;
device_init_wakeup(&pdev->dev, 1);
- status = platform_device_add_data(pdev, pdata->madc,
- sizeof(*pdata->madc));
+ status = platform_device_add_data(pdev, pdata->usb,
+ sizeof(*pdata->usb));
if (status < 0) {
platform_device_put(pdev);
goto err;
@@ -844,17 +844,19 @@ static int __init unprotect_pm_master(void)
static int __init power_companion_init(void)
{
+ int e = 0;
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
struct clk *osc;
u32 rate;
u8 ctrl = HFCLK_FREQ_26_MHZ;
- int e = 0;
if (cpu_is_omap2430())
osc = clk_get(NULL, "osc_ck");
else
osc = clk_get(NULL, "osc_sys_ck");
if (IS_ERR(osc)) {
- printk(KERN_WARNING "Skipping twl3040 internal clock init and "
+ printk(KERN_WARNING "Skipping twl4030 internal clock init and "
"using bootloader value (unknown osc rate)\n");
return 0;
}
@@ -879,6 +881,7 @@ static int __init power_companion_init(void)
/* effect->MADC+USB ck en */
e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, ctrl, R_CFG_BOOT);
e |= protect_pm_master();
+#endif /* OMAP */
return e;
}
--
1.6.0.1.196.g01914
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
