* David Brownell <[EMAIL PROTECTED]> [081002 06:23]:
> From: David Brownell <[EMAIL PROTECTED]>
>
> The <linux/i2c/...> directory has too many headers for twl4030
> support. Start simplifying that by moving twl430-gpio.h into
> the main twl4030.h and also:
>
> - Providing comments to summarize the { module, offset } logical
> addressing vs the { i2c_client, register } physical addressing.
>
> - Moving the { module, offset } based I/O calls next to the place
> those modules are defined, with slightly improved descriptions.
>
> - Adding some section markers internal to twl4030.h so unrelated
> things can be visually separated.
>
> - Move TWL4030_GPIO_MAX adjacent to the other GPIO symbols.
>
> - Remove two more now-obsolete symbols (for GPIO pullup/pulldown).
>
> - Have global definitions of the three SIH_CTRL register bits,
> following the pattern of twl4030-core.c (and fixing a minor
> fault handling bug in reading the clear-on-read bit).
>
> To keep things simple, the only blocks with register declarations
> in this file should be ones with registers that (cleanly) get
> shared between components ... modules with SIH registers (for
> IRQ handling) being the obvious candidates.
>
> No functional changes.
Pushing.
Tony
>
> Signed-off-by: David Brownell <[EMAIL PROTECTED]>
> ---
> drivers/gpio/twl4030-gpio.c | 6 -
> drivers/mfd/twl4030-core.c | 12 ++-
> include/linux/i2c/twl4030-gpio.h | 76 ---------------------
> include/linux/i2c/twl4030.h | 130 ++++++++++++++++++++++++++++++-------
> 4 files changed, 115 insertions(+), 109 deletions(-)
>
> --- a/drivers/gpio/twl4030-gpio.c
> +++ b/drivers/gpio/twl4030-gpio.c
> @@ -38,7 +38,6 @@
> #include <linux/slab.h>
>
> #include <linux/i2c/twl4030.h>
> -#include <linux/i2c/twl4030-gpio.h>
>
>
> /*
> @@ -79,11 +78,6 @@ static int twl4030_gpio_irq_end;
> #define is_module() false
> #endif
>
> -/* GPIO_SIH_CTRL Fields */
> -#define MASK_GPIO_SIH_CTRL_EXCLEN BIT(0)
> -#define MASK_GPIO_SIH_CTRL_PENDDIS BIT(1)
> -#define MASK_GPIO_SIH_CTRL_COR BIT(2)
> -
> /* GPIO_CTRL Fields */
> #define MASK_GPIO_CTRL_GPIO0CD1 BIT(0)
> #define MASK_GPIO_CTRL_GPIO1CD2 BIT(1)
> --- a/drivers/mfd/twl4030-core.c
> +++ b/drivers/mfd/twl4030-core.c
> @@ -39,7 +39,6 @@
>
> #include <linux/i2c.h>
> #include <linux/i2c/twl4030.h>
> -#include <linux/i2c/twl4030-gpio.h>
> #include <linux/i2c/twl4030-madc.h>
> #include <linux/i2c/twl4030-pwrirq.h>
>
> @@ -183,7 +182,6 @@ static inline void activate_irq(int irq)
> #define TWL4030_MADC_MADC_SIH_CTRL 0x67
> #define TWL4030_KEYPAD_KEYP_SIH_CTRL 0x17
>
> -#define TWL4030_SIH_CTRL_COR_MASK (1 << 2)
>
> /**
> * struct twl4030_mod_iregs - TWL module IMR/ISR regs to mask/clear at init
> @@ -341,12 +339,20 @@ struct twl4030mapping {
>
> /* mapping the module id to slave id and base address */
> static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = {
> + /*
> + * NOTE: don't change this table without updating the
> + * <linux/i2c/twl4030.h> defines for TWL4030_MODULE_*
> + * so they continue to match the order in this table.
> + */
> +
> { TWL4030_SLAVENUM_NUM0, TWL4030_BASEADD_USB },
> +
> { TWL4030_SLAVENUM_NUM1, TWL4030_BASEADD_AUDIO_VOICE },
> { TWL4030_SLAVENUM_NUM1, TWL4030_BASEADD_GPIO },
> { TWL4030_SLAVENUM_NUM1, TWL4030_BASEADD_INTBR },
> { TWL4030_SLAVENUM_NUM1, TWL4030_BASEADD_PIH },
> { TWL4030_SLAVENUM_NUM1, TWL4030_BASEADD_TEST },
> +
> { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_KEYPAD },
> { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_MADC },
> { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_INTERRUPTS },
> @@ -357,6 +363,7 @@ static struct twl4030mapping twl4030_map
> { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_PWM1 },
> { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_PWMA },
> { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_PWMB },
> +
> { TWL4030_SLAVENUM_NUM3, TWL4030_BASEADD_BACKUP },
> { TWL4030_SLAVENUM_NUM3, TWL4030_BASEADD_INT },
> { TWL4030_SLAVENUM_NUM3, TWL4030_BASEADD_PM_MASTER },
> @@ -1080,7 +1087,6 @@ static void __init twl4030_mask_clear_in
>
> /* Are ISRs cleared by reads or writes? */
> cor = twl4030_read_cor_bit(tmr.mod_no, tmr.sih_ctrl);
> - WARN_ON(cor < 0);
>
> for (j = 0; j < tmr.reg_cnt; j++) {
>
> --- a/include/linux/i2c/twl4030-gpio.h
> +++ /dev/null
> @@ -1,76 +0,0 @@
> -/*
> - * twl4030-gpio.h - header for TWL4030 GPIO module
> - *
> - * Copyright (C) 2005-2006, 2008 Texas Instruments, Inc.
> - * Copyright (C) 2008 Nokia Corporation
> - *
> - * Based on tlv320aic23.c:
> - * Copyright (c) by Kai Svahn <[EMAIL PROTECTED]>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> - *
> - */
> -
> -#ifndef __TWL4030_GPIO_H_
> -#define __TWL4030_GPIO_H_
> -
> -/*
> - * GPIO Block Register definitions
> - */
> -
> -#define REG_GPIODATAIN1 0x0
> -#define REG_GPIODATAIN2 0x1
> -#define REG_GPIODATAIN3 0x2
> -#define REG_GPIODATADIR1 0x3
> -#define REG_GPIODATADIR2 0x4
> -#define REG_GPIODATADIR3 0x5
> -#define REG_GPIODATAOUT1 0x6
> -#define REG_GPIODATAOUT2 0x7
> -#define REG_GPIODATAOUT3 0x8
> -#define REG_CLEARGPIODATAOUT1 0x9
> -#define REG_CLEARGPIODATAOUT2 0xA
> -#define REG_CLEARGPIODATAOUT3 0xB
> -#define REG_SETGPIODATAOUT1 0xC
> -#define REG_SETGPIODATAOUT2 0xD
> -#define REG_SETGPIODATAOUT3 0xE
> -#define REG_GPIO_DEBEN1 0xF
> -#define REG_GPIO_DEBEN2 0x10
> -#define REG_GPIO_DEBEN3 0x11
> -#define REG_GPIO_CTRL 0x12
> -#define REG_GPIOPUPDCTR1 0x13
> -#define REG_GPIOPUPDCTR2 0x14
> -#define REG_GPIOPUPDCTR3 0x15
> -#define REG_GPIOPUPDCTR4 0x16
> -#define REG_GPIOPUPDCTR5 0x17
> -#define REG_GPIO_ISR1A 0x19
> -#define REG_GPIO_ISR2A 0x1A
> -#define REG_GPIO_ISR3A 0x1B
> -#define REG_GPIO_IMR1A 0x1C
> -#define REG_GPIO_IMR2A 0x1D
> -#define REG_GPIO_IMR3A 0x1E
> -#define REG_GPIO_ISR1B 0x1F
> -#define REG_GPIO_ISR2B 0x20
> -#define REG_GPIO_ISR3B 0x21
> -#define REG_GPIO_IMR1B 0x22
> -#define REG_GPIO_IMR2B 0x23
> -#define REG_GPIO_IMR3B 0x24
> -#define REG_GPIO_EDR1 0x28
> -#define REG_GPIO_EDR2 0x29
> -#define REG_GPIO_EDR3 0x2A
> -#define REG_GPIO_EDR4 0x2B
> -#define REG_GPIO_EDR5 0x2C
> -#define REG_GPIO_SIH_CTRL 0x2D
> -
> -#endif /* End of __TWL4030_GPIO_H */
> --- a/include/linux/i2c/twl4030.h
> +++ b/include/linux/i2c/twl4030.h
> @@ -25,15 +25,28 @@
> #ifndef __TWL4030_H_
> #define __TWL4030_H_
>
> -/* USB ID */
> +/*
> + * Using the twl4030 core we address registers using a pair
> + * { module id, relative register offset }
> + * which that core then maps to the relevant
> + * { i2c slave, absolute register address }
> + *
> + * The module IDs are meaningful only to the twl4030 core code,
> + * which uses them as array indices to look up the first register
> + * address each module uses within a given i2c slave.
> + */
> +
> +/* Slave 0 (i2c address 0x48) */
> #define TWL4030_MODULE_USB 0x00
> -/* AUD ID */
> +
> +/* Slave 1 (i2c address 0x49) */
> #define TWL4030_MODULE_AUDIO_VOICE 0x01
> #define TWL4030_MODULE_GPIO 0x02
> #define TWL4030_MODULE_INTBR 0x03
> #define TWL4030_MODULE_PIH 0x04
> #define TWL4030_MODULE_TEST 0x05
> -/* AUX ID */
> +
> +/* Slave 2 (i2c address 0x4a) */
> #define TWL4030_MODULE_KEYPAD 0x06
> #define TWL4030_MODULE_MADC 0x07
> #define TWL4030_MODULE_INTERRUPTS 0x08
> @@ -44,7 +57,8 @@
> #define TWL4030_MODULE_PWM1 0x0D
> #define TWL4030_MODULE_PWMA 0x0E
> #define TWL4030_MODULE_PWMB 0x0F
> -/* POWER ID */
> +
> +/* Slave 3 (i2c address 0x4b) */
> #define TWL4030_MODULE_BACKUP 0x10
> #define TWL4030_MODULE_INT 0x11
> #define TWL4030_MODULE_PM_MASTER 0x12
> @@ -52,6 +66,92 @@
> #define TWL4030_MODULE_RTC 0x14
> #define TWL4030_MODULE_SECURED_REG 0x15
>
> +/*
> + * Read and write single 8-bit registers
> + */
> +int twl4030_i2c_write_u8(u8 mod_no, u8 val, u8 reg);
> +int twl4030_i2c_read_u8(u8 mod_no, u8 *val, u8 reg);
> +
> +/*
> + * Read and write several 8-bit registers at once.
> + *
> + * IMPORTANT: For twl4030_i2c_write(), allocate num_bytes + 1
> + * for the value, and populate your data starting at offset 1.
> + */
> +int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, u8 num_bytes);
> +int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, u8 num_bytes);
> +
> +/*----------------------------------------------------------------------*/
> +
> +/*
> + * NOTE: at up to 1024 registers, this is a big chip.
> + *
> + * Avoid putting register declarations in this file, instead of into
> + * a driver-private file, unless some of the registers in a block
> + * need to be shared with other drivers. One example is blocks that
> + * have Secondary IRQ Handler (SIH) registers.
> + */
> +
> +#define TWL4030_SIH_CTRL_EXCLEN_MASK BIT(0)
> +#define TWL4030_SIH_CTRL_PENDDIS_MASK BIT(1)
> +#define TWL4030_SIH_CTRL_COR_MASK BIT(2)
> +
> +/*----------------------------------------------------------------------*/
> +
> +/*
> + * GPIO Block Register offsets (use TWL4030_MODULE_GPIO)
> + */
> +
> +#define REG_GPIODATAIN1 0x0
> +#define REG_GPIODATAIN2 0x1
> +#define REG_GPIODATAIN3 0x2
> +#define REG_GPIODATADIR1 0x3
> +#define REG_GPIODATADIR2 0x4
> +#define REG_GPIODATADIR3 0x5
> +#define REG_GPIODATAOUT1 0x6
> +#define REG_GPIODATAOUT2 0x7
> +#define REG_GPIODATAOUT3 0x8
> +#define REG_CLEARGPIODATAOUT1 0x9
> +#define REG_CLEARGPIODATAOUT2 0xA
> +#define REG_CLEARGPIODATAOUT3 0xB
> +#define REG_SETGPIODATAOUT1 0xC
> +#define REG_SETGPIODATAOUT2 0xD
> +#define REG_SETGPIODATAOUT3 0xE
> +#define REG_GPIO_DEBEN1 0xF
> +#define REG_GPIO_DEBEN2 0x10
> +#define REG_GPIO_DEBEN3 0x11
> +#define REG_GPIO_CTRL 0x12
> +#define REG_GPIOPUPDCTR1 0x13
> +#define REG_GPIOPUPDCTR2 0x14
> +#define REG_GPIOPUPDCTR3 0x15
> +#define REG_GPIOPUPDCTR4 0x16
> +#define REG_GPIOPUPDCTR5 0x17
> +#define REG_GPIO_ISR1A 0x19
> +#define REG_GPIO_ISR2A 0x1A
> +#define REG_GPIO_ISR3A 0x1B
> +#define REG_GPIO_IMR1A 0x1C
> +#define REG_GPIO_IMR2A 0x1D
> +#define REG_GPIO_IMR3A 0x1E
> +#define REG_GPIO_ISR1B 0x1F
> +#define REG_GPIO_ISR2B 0x20
> +#define REG_GPIO_ISR3B 0x21
> +#define REG_GPIO_IMR1B 0x22
> +#define REG_GPIO_IMR2B 0x23
> +#define REG_GPIO_IMR3B 0x24
> +#define REG_GPIO_EDR1 0x28
> +#define REG_GPIO_EDR2 0x29
> +#define REG_GPIO_EDR3 0x2A
> +#define REG_GPIO_EDR4 0x2B
> +#define REG_GPIO_EDR5 0x2C
> +#define REG_GPIO_SIH_CTRL 0x2D
> +
> +/* Up to 18 signals are available as GPIOs, when their
> + * pins are not assigned to another use (such as ULPI/USB).
> + */
> +#define TWL4030_GPIO_MAX 18
> +
> +/*----------------------------------------------------------------------*/
> +
> struct twl4030_bci_platform_data {
> int *battery_tmp_tbl;
> unsigned int tblsize;
> @@ -109,6 +209,8 @@ struct twl4030_platform_data {
> /* REVISIT more to come ... _nothing_ should be hard-wired */
> };
>
> +/*----------------------------------------------------------------------*/
> +
> /*
> * FIXME completely stop using TWL4030_IRQ_BASE ... instead, pass the
> * IRQ data to subsidiary devices using platform device resources.
> @@ -148,28 +250,8 @@ struct twl4030_platform_data {
>
> /* TWL4030 GPIO interrupt definitions */
>
> -#define TWL4030_GPIO_MAX 18
> #define TWL4030_GPIO_IRQ_NO(n) (TWL4030_GPIO_IRQ_BASE + (n))
> #define TWL4030_GPIO_IS_ENABLE 1
> -#define TWL4030_GPIO_PULL_UP 0
> -#define TWL4030_GPIO_PULL_DOWN 1
> -
> -/* Functions to read and write from TWL4030 */
> -
> -/*
> - * IMP NOTE:
> - * The base address of the module will be added by the triton driver
> - * It is the caller's responsibility to ensure sane values
> - */
> -int twl4030_i2c_write_u8(u8 mod_no, u8 val, u8 reg);
> -int twl4030_i2c_read_u8(u8 mod_no, u8 *val, u8 reg);
> -
> - /*
> - * i2c_write: IMPORTANT - Allocate value num_bytes+1 and valid data starts
> at
> - * Offset 1.
> - */
> -int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, u8 num_bytes);
> -int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, u8 num_bytes);
>
> /*
> * Exported TWL4030 GPIO APIs
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
