That LED_CONNECTED_WRONG was never defined so removing.
If someone needs those hooks, add back via proper
platform_data instead of nasty ifdefery.
Signed-off-by: Felipe Balbi <[EMAIL PROTECTED]>
---
drivers/i2c/chips/lp5521.c | 22 ----------------------
1 files changed, 0 insertions(+), 22 deletions(-)
diff --git a/drivers/i2c/chips/lp5521.c b/drivers/i2c/chips/lp5521.c
index c0862d9..7fb8091 100644
--- a/drivers/i2c/chips/lp5521.c
+++ b/drivers/i2c/chips/lp5521.c
@@ -28,13 +28,8 @@
#define LP5521_DRIVER_NAME "lp5521"
-#ifdef LED_CONNECTED_WRONG
-#define LP5521_REG_R_PWM 0x04
-#define LP5521_REG_B_PWM 0x02
-#else
#define LP5521_REG_R_PWM 0x02
#define LP5521_REG_B_PWM 0x04
-#endif
#define LP5521_REG_ENABLE 0x00
#define LP5521_REG_OP_MODE 0x01
#define LP5521_REG_G_PWM 0x03
@@ -200,22 +195,12 @@ static ssize_t show_active_channels(struct device *dev,
char channels[4];
int pos = 0;
-#ifdef LED_CONNECTED_WRONG
- if (chip->blue)
- pos += sprintf(channels + pos, "r");
- if (chip->green)
- pos += sprintf(channels + pos, "g");
- if (chip->red)
- pos += sprintf(channels + pos, "b");
-
-#else
if (chip->red)
pos += sprintf(channels + pos, "r");
if (chip->green)
pos += sprintf(channels + pos, "g");
if (chip->blue)
pos += sprintf(channels + pos, "b");
-#endif
channels[pos] = '\0';
@@ -232,17 +217,10 @@ static ssize_t store_active_channels(struct device *dev,
chip->green = 0;
chip->blue = 0;
-#ifdef LED_CONNECTED_WRONG
- if (strchr(buf, 'r') != NULL)
- chip->blue = 1;
- if (strchr(buf, 'b') != NULL)
- chip->red = 1;
-#else
if (strchr(buf, 'r') != NULL)
chip->red = 1;
if (strchr(buf, 'b') != NULL)
chip->blue = 1;
-#endif
if (strchr(buf, 'g') != NULL)
chip->green = 1;
--
1.6.0.2.307.gc427
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
