From: David Brownell <[EMAIL PROTECTED]>
Bugfixes to TWL subdriver irq handler setup ... lockdep
workarounds, remove IRQF_DISABLED. NOPs with current code.
These changes are specific to the drivers which register
directly with the PIH irq_chip (in twl4030-core), and are
prerequsites to a cleanup patch for that PIH infrastructure.
(Unless you don't use these drivers.)
Signed-off-by: David Brownell <[EMAIL PROTECTED]>
---
I can't test any of these, but "what could go wrong" ...
drivers/i2c/chips/twl4030-madc.c | 10 +++++++++-
drivers/input/keyboard/omap-twl4030keypad.c | 11 +++++++++--
drivers/power/twl4030_bci_battery.c | 18 +++++++++++++++++-
3 files changed, 35 insertions(+), 4 deletions(-)
--- a/drivers/i2c/chips/twl4030-madc.c
+++ b/drivers/i2c/chips/twl4030-madc.c
@@ -148,6 +148,14 @@ static irqreturn_t twl4030_madc_irq_hand
u8 isr_val, imr_val;
int i;
+#ifdef CONFIG_LOCKDEP
+ /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which
+ * we don't want and can't tolerate. Although it might be
+ * friendlier not to borrow this thread context...
+ */
+ local_irq_enable();
+#endif
+
/* Use COR to ack interrupts since we have no shared IRQs in ISRx */
isr_val = twl4030_madc_read(madc, madc->isr);
imr_val = twl4030_madc_read(madc, madc->imr);
@@ -451,7 +459,7 @@ static int __init twl4030_madc_probe(str
regval, TWL4030_BCI_BCICTL1);
ret = request_irq(TWL4030_MODIRQ_MADC, twl4030_madc_irq_handler,
- IRQF_DISABLED, "twl4030_madc", madc);
+ 0, "twl4030_madc", madc);
if (ret) {
dev_dbg(&pdev->dev, "could not request irq\n");
goto err_irq;
--- a/drivers/input/keyboard/omap-twl4030keypad.c
+++ b/drivers/input/keyboard/omap-twl4030keypad.c
@@ -208,6 +208,14 @@ static irqreturn_t do_kp_irq(int irq, vo
u8 reg;
int ret;
+#ifdef CONFIG_LOCKDEP
+ /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which
+ * we don't want and can't tolerate. Although it might be
+ * friendlier not to borrow this thread context...
+ */
+ local_irq_enable();
+#endif
+
/* Read & Clear TWL4030 pending interrupt */
ret = twl4030_kpread(kp, TWL4030_MODULE_KEYPAD, ®, KEYP_ISR1, 1);
@@ -340,8 +348,7 @@ static int __init omap_kp_probe(struct p
* This ISR will always execute in kernel thread context because of
* the need to access the TWL4030 over the I2C bus.
*/
- ret = request_irq(kp->irq, do_kp_irq, IRQF_DISABLED,
- "TWL4030 Keypad", kp);
+ ret = request_irq(kp->irq, do_kp_irq, 0, pdev->name, kp);
if (ret < 0) {
dev_info(kp->dbg_dev, "request_irq failed for irq no=%d\n",
kp->irq);
--- a/drivers/power/twl4030_bci_battery.c
+++ b/drivers/power/twl4030_bci_battery.c
@@ -210,6 +210,14 @@ static irqreturn_t twl4030charger_interr
{
struct twl4030_bci_device_info *di = _di;
+#ifdef CONFIG_LOCKDEP
+ /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which
+ * we don't want and can't tolerate. Although it might be
+ * friendlier not to borrow this thread context...
+ */
+ local_irq_enable();
+#endif
+
twl4030charger_presence_evt();
power_supply_changed(&di->bat);
@@ -310,6 +318,14 @@ static irqreturn_t twl4030battery_interr
u8 isr1a_val, isr2a_val, clear_2a, clear_1a;
int ret;
+#ifdef CONFIG_LOCKDEP
+ /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which
+ * we don't want and can't tolerate. Although it might be
+ * friendlier not to borrow this thread context...
+ */
+ local_irq_enable();
+#endif
+
ret = twl4030_i2c_read_u8(TWL4030_MODULE_INTERRUPTS, &isr1a_val,
REG_BCIISR1A);
if (ret)
@@ -943,7 +959,7 @@ static int __init twl4030_bci_battery_pr
/* request BCI interruption */
ret = request_irq(TWL4030_MODIRQ_BCI, twl4030battery_interrupt,
- IRQF_DISABLED, pdev->name, NULL);
+ 0, pdev->name, NULL);
if (ret) {
dev_dbg(&pdev->dev, "could not request irq %d, status %d\n",
TWL4030_MODIRQ_BCI, ret);
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
