Hi Jarkko,
On Thu, 9 Oct 2008, Jarkko Nikula wrote:
> At least N810 hangs somewhere executing local_flush_tlb_all() in
> omap_map_sram. Last printk is before that call.
does the following patch fix the problem for you?
- Paul
Author: Paul Walmsley <[EMAIL PROTECTED]>
Date: Thu Oct 9 07:27:38 2008 -0600
Commit 1c957036bbd912322793da676d05e169abf24782 breaks booting on
OMAP2; the SRAM is mapped on top of the L4 interconnect. This causes
the system to hang early in boot in omap_map_sram() during a TLB flush.
Fix by moving SRAM elsewhere in the memory map.
Reported by Jarkko Nikula <[EMAIL PROTECTED]>. This patch is a
collaboration with Tony Lindgren <[EMAIL PROTECTED]> and
Kevin Hilman <[EMAIL PROTECTED]>.
Tested on 2430SDP.
Signed-off-by: Paul Walmsley <[EMAIL PROTECTED]>
Cc: Kevin Hilman <[EMAIL PROTECTED]>
Cc: Jarkko Nikula <[EMAIL PROTECTED]>
Cc: Tony Lindgren <[EMAIL PROTECTED]>
Cc: Måns Rullgård <[EMAIL PROTECTED]>
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 853048d..ca4c276 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -37,8 +37,8 @@
#define OMAP1_SRAM_VA VMALLOC_END
#define OMAP2_SRAM_PA 0x40200000
#define OMAP2_SRAM_PUB_PA 0x4020f800
-#define OMAP2_SRAM_VA VMALLOC_END
-#define OMAP2_SRAM_PUB_VA (VMALLOC_END + 0x800)
+#define OMAP2_SRAM_VA 0xe1000000
+#define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800)
#define OMAP3_SRAM_PA 0x40200000
#define OMAP3_SRAM_VA 0xd7000000
#define OMAP3_SRAM_PUB_PA 0x40208000
