From: David Brownell <[EMAIL PROTECTED]>
Replace twl4030-pwrirq with the more capable generic TWL SIH
support.
"More capable" includes standard support for IRQ trigger modes;
so make the RTC and USB transceiver drivers use genirq for that.
Signed-off-by: David Brownell <[EMAIL PROTECTED]>
---
drivers/i2c/chips/Makefile | 2
drivers/i2c/chips/twl4030-pwrirq.c | 191 -----------------------------------
drivers/i2c/chips/twl4030-usb.c | 23 ----
drivers/mfd/twl4030-irq.c | 7 +
drivers/rtc/rtc-twl4030.c | 19 ---
5 files changed, 15 insertions(+), 227 deletions(-)
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -24,7 +24,7 @@ obj-$(CONFIG_GPIOEXPANDER_OMAP) += gpio_
obj-$(CONFIG_MENELAUS) += menelaus.o
obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o
-obj-$(CONFIG_TWL4030_CORE) += twl4030-pwrirq.o twl4030-power.o
+obj-$(CONFIG_TWL4030_CORE) += twl4030-power.o
obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o
obj-$(CONFIG_TWL4030_POWEROFF) += twl4030-poweroff.o
obj-$(CONFIG_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o
--- a/drivers/i2c/chips/twl4030-pwrirq.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * twl4030-pwrirq.c - handle power interrupts from TWL3040
- *
- * Copyright (C) 2008 Nokia Corporation
- *
- * Written by Peter De Schrijver <[EMAIL PROTECTED]>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of this
- * archive for more details.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/i2c.h>
-#include <linux/random.h>
-#include <linux/kthread.h>
-#include <linux/i2c/twl4030.h>
-
-
-static DEFINE_SPINLOCK(pwr_lock);
-static u8 twl4030_pwrirq_mask;
-
-static struct task_struct *twl4030_pwrirq_unmask_thread;
-
-static void twl4030_pwrirq_ack(unsigned int irq) {}
-
-static void twl4030_pwrirq_disableint(unsigned int irq)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&pwr_lock, flags);
- twl4030_pwrirq_mask |= 1 << (irq - TWL4030_PWR_IRQ_BASE);
- if (twl4030_pwrirq_unmask_thread
- && twl4030_pwrirq_unmask_thread->state != TASK_RUNNING)
- wake_up_process(twl4030_pwrirq_unmask_thread);
- spin_unlock_irqrestore(&pwr_lock, flags);
-}
-
-static void twl4030_pwrirq_enableint(unsigned int irq)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&pwr_lock, flags);
- twl4030_pwrirq_mask &= ~(1 << (irq - TWL4030_PWR_IRQ_BASE));
- if (twl4030_pwrirq_unmask_thread
- && twl4030_pwrirq_unmask_thread->state != TASK_RUNNING)
- wake_up_process(twl4030_pwrirq_unmask_thread);
- spin_unlock_irqrestore(&pwr_lock, flags);
-}
-
-static struct irq_chip twl4030_pwrirq_chip = {
- .name = "twl4030-pwr",
- .ack = twl4030_pwrirq_ack,
- .mask = twl4030_pwrirq_disableint,
- .unmask = twl4030_pwrirq_enableint,
-};
-
-static void do_twl4030_pwrirq(unsigned int irq, irq_desc_t *desc)
-{
- const unsigned int cpu = smp_processor_id();
-
- desc->status |= IRQ_LEVEL;
-
- desc->chip->ack(irq);
-
- if (!desc->depth) {
- int ret;
- int module_irq;
- u8 pwr_isr;
-
- kstat_cpu(cpu).irqs[irq]++;
-
- local_irq_enable();
- ret = twl4030_i2c_read_u8(TWL4030_MODULE_INT, &pwr_isr,
- TWL4030_INT_PWR_ISR1);
- local_irq_disable();
- if (ret) {
- printk(KERN_WARNING
- "I2C error %d while reading TWL4030"
- "INT PWR_ISR1 register\n", ret);
- return;
- }
-
- for (module_irq = TWL4030_PWR_IRQ_BASE; pwr_isr != 0;
- module_irq++, pwr_isr >>= 1) {
- if (pwr_isr & 1)
- generic_handle_irq(module_irq);
- }
-
- desc->chip->unmask(irq);
- }
-}
-
-static int twl4030_pwrirq_thread(void *data)
-{
- current->flags |= PF_NOFREEZE;
-
- while (!kthread_should_stop()) {
- u8 local_mask;
-
- spin_lock_irq(&pwr_lock);
- local_mask = twl4030_pwrirq_mask;
- spin_unlock_irq(&pwr_lock);
-
- twl4030_i2c_write_u8(TWL4030_MODULE_INT, local_mask,
- TWL4030_INT_PWR_IMR1);
-
- spin_lock_irq(&pwr_lock);
- if (local_mask == twl4030_pwrirq_mask)
- set_current_state(TASK_INTERRUPTIBLE);
- spin_unlock_irq(&pwr_lock);
-
- schedule();
- }
- set_current_state(TASK_RUNNING);
- return 0;
-}
-
-static int __init twl4030_pwrirq_init(void)
-{
- int i, err;
-
- twl4030_pwrirq_mask = 0xff;
-
- err = twl4030_i2c_write_u8(TWL4030_MODULE_INT, twl4030_pwrirq_mask,
- TWL4030_INT_PWR_IMR1);
- if (err)
- return err;
-
- /* Enable clear on read */
-
- err = twl4030_i2c_write_u8(TWL4030_MODULE_INT,
- TWL4030_SIH_CTRL_COR_MASK,
- TWL4030_INT_PWR_SIH_CTRL);
- if (err)
- return err;
-
- twl4030_pwrirq_unmask_thread = kthread_create(twl4030_pwrirq_thread,
- NULL, "twl4030 pwrirq");
- if (!twl4030_pwrirq_unmask_thread) {
- printk(KERN_ERR
- "%s: could not create twl4030 pwrirq unmask thread!\n",
- __func__);
- return -ENOMEM;
- }
-
- for (i = TWL4030_PWR_IRQ_BASE; i < TWL4030_PWR_IRQ_END; i++) {
- set_irq_chip_and_handler(i, &twl4030_pwrirq_chip,
- handle_edge_irq);
- set_irq_flags(i, IRQF_VALID);
- }
-
- set_irq_chained_handler(TWL4030_MODIRQ_PWR, do_twl4030_pwrirq);
-
- return 0;
-}
-subsys_initcall(twl4030_pwrirq_init);
-
-static void __exit twl4030_pwrirq_exit(void)
-{
-
- int i;
-
- /* FIXME the irqs are left enabled; trouble when they arrive... */
-
- set_irq_handler(TWL4030_MODIRQ_PWR, NULL);
- set_irq_flags(TWL4030_MODIRQ_PWR, 0);
-
- for (i = TWL4030_PWR_IRQ_BASE; i < TWL4030_PWR_IRQ_END; i++) {
- set_irq_handler(i, NULL);
- set_irq_flags(i, 0);
- }
-
- if (twl4030_pwrirq_unmask_thread) {
- kthread_stop(twl4030_pwrirq_unmask_thread);
- twl4030_pwrirq_unmask_thread = NULL;
- }
-}
-module_exit(twl4030_pwrirq_exit);
--- a/drivers/i2c/chips/twl4030-usb.c
+++ b/drivers/i2c/chips/twl4030-usb.c
@@ -28,6 +28,7 @@
#include <linux/init.h>
#include <linux/time.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
@@ -409,23 +410,9 @@ static void twl4030_i2c_access(struct tw
}
}
-static void usb_irq_enable(struct twl4030_usb *twl, int rising, int falling)
+static void usb_irq_enable(struct twl4030_usb *twl, int trigger)
{
- u8 val;
-
- /* FIXME use set_irq_type(...) when that (soon) works */
-
- /* edge setup */
- WARN_ON(twl4030_i2c_read_u8(TWL4030_MODULE_INT,
- &val, REG_PWR_EDR1) < 0);
-
- val &= ~(USB_PRES_RISING | USB_PRES_FALLING);
- if (rising)
- val = val | USB_PRES_RISING;
- if (falling)
- val = val | USB_PRES_FALLING;
- WARN_ON(twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_INT,
- val, REG_PWR_EDR1) < 0);
+ set_irq_type(twl->irq, trigger);
if (!twl->irq_enabled) {
enable_irq(twl->irq);
@@ -469,7 +456,7 @@ static void twl4030_phy_suspend(struct t
if (!controller_off)
/* enable rising edge interrupt to detect cable attach */
- usb_irq_enable(twl, 1, 0);
+ usb_irq_enable(twl, IRQ_TYPE_EDGE_RISING);
twl4030_phy_power(twl, 0);
twl->asleep = 1;
@@ -481,7 +468,7 @@ static void twl4030_phy_resume(struct tw
return;
/* enable falling edge interrupt to detect cable detach */
- usb_irq_enable(twl, 0, 1);
+ usb_irq_enable(twl, IRQ_TYPE_EDGE_FALLING);
twl4030_phy_power(twl, 1);
twl4030_i2c_access(twl, 1);
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -704,6 +704,13 @@ int twl_init_irq(int irq_num, unsigned i
pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", "PIH",
irq_num, irq_base, twl4030_irq_next - 1);
+ /* ... and the PWR_INT module ... */
+ status = twl4030_sih_setup(TWL4030_MODULE_INT);
+ if (status < 0) {
+ pr_err("twl4030: sih_setup PWR INT --> %d\n", status);
+ goto fail;
+ }
+
/* install an irq handler to demultiplex the TWL4030 interrupt */
task = start_twl4030_irq_thread(irq_num);
if (!task) {
--- a/drivers/rtc/rtc-twl4030.c
+++ b/drivers/rtc/rtc-twl4030.c
@@ -447,7 +447,8 @@ static int __devinit twl4030_rtc_probe(s
goto out1;
ret = request_irq(irq, twl4030_rtc_interrupt,
- 0, rtc->dev.bus_id, rtc);
+ IRQF_TRIGGER_RISING,
+ rtc->dev.bus_id, rtc);
if (ret < 0) {
dev_err(&pdev->dev, "IRQ is not free.\n");
goto out1;
@@ -466,22 +467,6 @@ static int __devinit twl4030_rtc_probe(s
goto out2;
}
- /* FIXME stop touching MODULE_INT registers; there's already
- * driver code responsible for them.
- */
-
- /* use rising edge detection for RTC alarm */
- ret = twl4030_i2c_read_u8(TWL4030_MODULE_INT,
- &rd_reg, TWL4030_INT_PWR_EDR1);
- if (ret < 0)
- goto out2;
-
- rd_reg |= BIT(3);
- ret = twl4030_i2c_write_u8(TWL4030_MODULE_INT,
- rd_reg, TWL4030_INT_PWR_EDR1);
- if (ret < 0)
- goto out2;
-
/* init cached IRQ enable bits */
ret = twl4030_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG);
if (ret < 0)
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
