* Nathan Monson <[EMAIL PROTECTED]> [081016 15:15]:
> On Thu, Oct 16, 2008 at 3:10 PM, Tony Lindgren <[EMAIL PROTECTED]> wrote:
> > No.. And I also got some -33 errors here too :( So back to the drawing
> > board.
> >
> > Could you post step by step instructions on how you can reproduce your
> > problem?
>
> I'm running the DSP Bridge patches in my kernel. I got them set up
> using this guide:
> http://elinux.org/BeagleBoard/DSP_Howto
>
> That guide also points to some sample binaries, including 'ping.out',
> which is a simple round-trip test between the DSP and ARM.
>
> To reproduce, I do this:
> 1) Boot kernel with mem=122m
> 2) modprobe bridgedriver phys_mempool_base=0x87a00000
> phys_mempool_size=0x600000
> base_img=/home/root/dsp/ddspbase_tiomap3430.dof64P
> 3) while true; do ./ping.out; done
>
> This ALWAYS reproduces within seconds.
>
> If the DSP patches are too much work to get set up, I've also heard
> that people can reproduce this issue by playing movie files with
> mplayer on Angstrom.
Thanks, I'll set that up when I get a chance.
Meanwhile, here's one more patch for you to test if you have a chance.
Maybe also do a power off for few seconds before booting with this
just in case.
If this still does not help, then we'll use the strongly ordered patch
for now, and tag v2.6.27-omap1 tomorrow. Then we can continue debugging
the issue until we fully understand it.
Tony
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -53,6 +53,7 @@ static struct omap_irq_bank {
static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg)
{
__raw_writel(val, bank->base_reg + reg);
+ __raw_readl(bank->base_reg + reg);
}
static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg)
