A keypad hack was initially added when bringing up LDP.
This patch removes that hack from the TWL4030 keypad driver.
Signed-off-by: Dominic Curran <[EMAIL PROTECTED]>
---
drivers/input/keyboard/omap-twl4030keypad.c | 145 ---------------------------
1 files changed, 0 insertions(+), 145 deletions(-)
diff --git a/drivers/input/keyboard/omap-twl4030keypad.c
b/drivers/input/keyboard/omap-twl4030keypad.c
index f1903c9..42b26bc 100644
--- a/drivers/input/keyboard/omap-twl4030keypad.c
+++ b/drivers/input/keyboard/omap-twl4030keypad.c
@@ -49,16 +49,6 @@
#define KEYNUM_MASK 0x00FFFFFF
#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
-#ifdef CONFIG_MACH_OMAP_LDP
-static unsigned int *omap_gpios;
-static unsigned int cur_gpios[9];
-struct timer_list gpio_timer;
-
-#define GET_GPIO(val) (val >> 16) & 0xFFFF
-#define GET_KEY(val) (val & 0xFFFF)
-
-#endif
-
/* Global variables */
struct omap_keypad {
@@ -250,133 +240,6 @@ static irqreturn_t do_kp_irq(int irq, void *_kp)
return IRQ_HANDLED;
}
-#ifdef CONFIG_MACH_OMAP_LDP
-static void omap_gpio_kp_scan(struct omap_keypad *kp)
-{
- unsigned int new_gpio;
- int idx = 0, chg = 0, key, state;
- bool key_down = 0;
-
- while (omap_gpios[idx] != 0) {
- new_gpio = omap_get_gpio_datain(GET_GPIO(omap_gpios[idx]));
- chg = new_gpio ^ cur_gpios[idx];
-
- if (chg) {
- key = GET_KEY(omap_gpios[idx]);
- state = (new_gpio == 0);
- input_report_key(kp->omap_twl4030kp, key, state);
- }
-
- if (!new_gpio)
- key_down = 1;
-
- /* Store the keys current value. */
- cur_gpios[idx] = new_gpio;
- idx++;
- }
-
- /* Decide whether to kick off timer. */
- if (key_down) {
- int delay;
-
- delay = HZ / 20;
- /* A key is pressed - use timer to poll the keypad */
- mod_timer(&gpio_timer, jiffies + delay);
- }
-
- return;
-}
-
-
-/*
- * Keypad interrupt handler for OMAP GPIO's.
- */
-static irqreturn_t do_kp_gpio_irq(int irq, void *_kp)
-{
- struct omap_keypad *kp = _kp;
-
- /* Scan keypad for any changes in GPIO keys. */
- omap_gpio_kp_scan(kp);
-
- return IRQ_HANDLED;
-}
-
-
-static void omap_gpio_kp_timer(unsigned long arg)
-{
- struct omap_keypad *kp = (struct omap_keypad*)arg;
- omap_gpio_kp_scan(kp);
-}
-
-static int
-omap_gpio_kp_probe(struct omap_keypad *kp, unsigned int *gpio_keymap)
-{
- int i, idx = 0, irq_idx = 0;
-
- /* set the global to the GPIO keymap data*/
- omap_gpios = gpio_keymap;
-
- while (omap_gpios[idx] != 0) {
- /* initial values for current key state array. (1=Up,0=Down) */
- cur_gpios[idx] = 1;
-
- if (omap_request_gpio(GET_GPIO(omap_gpios[idx])) < 0) {
- printk(KERN_ERR "Failed to request GPIO%d for keypad\n",
- GET_GPIO(omap_gpios[idx]));
- goto err1;
- }
-
- /* GPIO direction is 'Input' */
- omap_set_gpio_direction(GET_GPIO(omap_gpios[idx]), 1);
- idx++;
- }
-
- /* enable GPIO interrupts */
- while (omap_gpios[irq_idx] != 0) {
- if (request_irq(OMAP_GPIO_IRQ(GET_GPIO(omap_gpios[irq_idx])),
- do_kp_gpio_irq, IRQF_TRIGGER_FALLING,
- "omap-keypad", kp) < 0)
- goto err2;
- irq_idx++;
- }
-
- /* Initialize GPIO timer */
- gpio_timer.function = omap_gpio_kp_timer;
- gpio_timer.data = (unsigned long)kp;
- init_timer(&gpio_timer);
-
- /* scan current key state */
- omap_gpio_kp_scan(kp);
-
- return 0;
-
-err2:
- for (i = irq_idx - 1; i >= 0; i--)
- free_irq(GET_GPIO(omap_gpios[i]), 0);
-err1:
- for (i = idx - 1; i >= 0; i--)
- omap_free_gpio(GET_GPIO(omap_gpios[i]));
-
- return -EINVAL;
-}
-
-int omap_gpio_kp_remove(void)
-{
- int idx = 0;
-
- del_timer_sync(&gpio_timer);
-
- while (omap_gpios[idx] != 0) {
- free_irq(GET_GPIO(omap_gpios[idx]), 0);
- omap_free_gpio(GET_GPIO(omap_gpios[idx]));
- idx++;
- }
-
- return 0;
-}
-
-#endif /*CONFIG_MACH_OMAP_LDP*/
-
/*
* Registers keypad device with input sub system
@@ -515,10 +378,6 @@ static int __init omap_kp_probe(struct platform_device
*pdev)
if (ret < 0)
goto err4;
-#ifdef CONFIG_MACH_OMAP_LDP
- omap_gpio_kp_probe(kp, pdata->row_gpios);
-#endif
-
return ret;
err5:
/* mask all events - we don't care about the result */
@@ -539,10 +398,6 @@ static int omap_kp_remove(struct platform_device *pdev)
free_irq(kp->irq, kp);
-#ifdef CONFIG_MACH_OMAP_LDP
- omap_gpio_kp_remove();
-#endif
-
input_unregister_device(kp->omap_twl4030kp);
kfree(kp);
--
1.5.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
