HSMMC2 was stuck on a test board when resuming from
suspend. After the resume the first command CMD0 is written to
command register and then we wait for an interrupt. After the CMD0
was written, no interrupt occured. No EOC, no timeout nor other error.
This jammed the request.
The problem was a wrong 3.0V voltage setting being applied into
HCTL before turning SDBP bit on. After fixing the voltage to 1.8V
suspend-resume started to work correctly.
Cheers
Jarkko Lavinen
>From 1be795080e89cca6e637f88a4e14026aee0a75e8 Mon Sep 17 00:00:00 2001
From: Jarkko Lavinen <[EMAIL PROTECTED]>
Date: Mon, 20 Oct 2008 11:23:45 +0300
Subject: [PATCH] OMAP: HSMMC: Fix HSMMC2 getting stuck with suspend/resume
Signed-off-by: Jarkko Lavinen <[EMAIL PROTECTED]>
---
drivers/mmc/host/omap_hsmmc.c | 19 ++++++++++---------
1 files changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 00b1b68..edd1ce0 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1068,15 +1068,16 @@ static int omap_mmc_suspend(struct platform_device
*pdev, pm_message_t state)
}
if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
- OMAP_HSMMC_WRITE(host->base, HCTL,
- OMAP_HSMMC_READ(host->base, HCTL)
- & SDVSCLR);
- OMAP_HSMMC_WRITE(host->base, HCTL,
- OMAP_HSMMC_READ(host->base, HCTL)
- | SDVS30);
- OMAP_HSMMC_WRITE(host->base, HCTL,
- OMAP_HSMMC_READ(host->base, HCTL)
- | SDBP);
+ u32 hctl = OMAP_HSMMC_READ(host->base, HCTL) &
+ SDVSCLR;
+
+ if (host->id == OMAP_MMC1_DEVID)
+ hctl |= SDVS30;
+ else
+ hctl |= SDVS18;
+
+ OMAP_HSMMC_WRITE(host->base, HCTL, hctl);
+ OMAP_HSMMC_WRITE(host->base, HCTL, hctl | SDBP);
}
clk_disable(host->fclk);
--
1.5.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
