[RFC 16/21] ARM: OMAP2: Complete gpiolib conversion in upstream merged board files

[Jarkko Nikula]

Signed-off-by: Jarkko Nikula <[EMAIL PROTECTED]>
---
 arch/arm/mach-omap2/board-2430sdp.c |    4 ++--
 arch/arm/mach-omap2/board-apollon.c |    6 +++---
 arch/arm/mach-omap2/board-ldp.c     |    2 +-
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-omap2/board-2430sdp.c 
b/arch/arm/mach-omap2/board-2430sdp.c
index 42e51d8..e6acac8 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -213,7 +213,7 @@ static struct platform_device *sdp2430_devices[] __initdata 
= {
 
 static void ads7846_dev_init(void)
 {
-       if (omap_request_gpio(TS_GPIO) < 0)
+       if (gpio_request(TS_GPIO, "ADS7846 pendown") < 0)
                printk(KERN_ERR "can't get ads746 pen down GPIO\n");
 
        gpio_direction_input(TS_GPIO);
@@ -307,7 +307,7 @@ static inline void __init sdp2430_init_smc91x(void)
        sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f;
        udelay(100);
 
-       if (omap_request_gpio(OMAP24XX_ETHR_GPIO_IRQ) < 0) {
+       if (gpio_request(OMAP24XX_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
                printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
                        OMAP24XX_ETHR_GPIO_IRQ);
                gpmc_cs_free(eth_cs);
diff --git a/arch/arm/mach-omap2/board-apollon.c 
b/arch/arm/mach-omap2/board-apollon.c
index fcf2ab0..c68bf06 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -308,7 +308,7 @@ static inline void __init apollon_init_smc91x(void)
        udelay(100);
 
        omap_cfg_reg(W4__24XX_GPIO74);
-       if (omap_request_gpio(APOLLON_ETHR_GPIO_IRQ) < 0) {
+       if (gpio_request(APOLLON_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
                printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
                        APOLLON_ETHR_GPIO_IRQ);
                gpmc_cs_free(eth_cs);
@@ -391,7 +391,7 @@ static void __init apollon_usb_init(void)
        /* USB device */
        /* DEVICE_SUSPEND */
        omap_cfg_reg(P21_242X_GPIO12);
-       omap_request_gpio(12);
+       gpio_request(12, "USB suspend");
        gpio_direction_output(12, 0);
 }
 
@@ -399,7 +399,7 @@ static void __init apollon_tsc_init(void)
 {
        /* TSC2101 */
        omap_cfg_reg(N15_24XX_GPIO85);
-       omap_request_gpio(85);
+       gpio_request(85, "TSC2101 irq");
        gpio_direction_input(85);
 
        omap_cfg_reg(W14_24XX_SYS_CLKOUT);      /* mclk */
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index dc1c3c1..5401fb7 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -94,7 +94,7 @@ out:
  */
 static void ads7846_dev_init(void)
 {
-       if (omap_request_gpio(ts_gpio) < 0) {
+       if (gpio_request(ts_gpio, "ADS7846 pendown") < 0) {
                printk(KERN_ERR "can't get ads746 pen down GPIO\n");
                return;
        }
-- 
1.5.6.5

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html